AP230 RFHIC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ rfsales@rfhic.com ▪ Version 6.0 Product Features Applications

  • Small size
  • NO matching circuit needed
  • High efficiency
  • Dual supply voltage
  • Higher linearity
  • Higher productivity
  • Lower manufacturing cost
  • GaAs MMIC
  • 3MHz – 2150MHz
  • -63dBc CSO 135 Channels@ output Level +37dBmV
  • -60dBc CTB 135 Channels@ output Level +37dBmV
  • -70dBc CSO 8 Channels@ output Level +45dBmV
  • -73dBc CTB 8 Channels@ output Level +45dBmV
  • Satellite
  • Repeater
  • Base Station
  • Converter
  • CATV
  • SMATV Descriptions The power amplifier is designed for base stations and repeater systems. GaAs MMIC is used and attached on a copper carrier of 8 pin air cavity package with dual supply voltage Operating Ranges PARAMETER UNIT MIN TYP MAX Device V oltage VDC +5 +5.3 Case Temperature ℃ -40 - +85 Absolute Minimum and Maximum Ratings PARAMETER UNIT MIN MAX Device V oltage VDC +5.5 Device Current mA +320 RF Input Power dBm +10 Storage Temperature ℃ -40 +150 Specifications T=25℃, Vcc=5.0V , 75Ω system Units Minimum Typical Maximum Condition MHz 3MHz~2.15GHz V5 V c c = 5 V m A 200 220 250 dB 16 3MHz dB 15 50MHz dB 14 2150MHz dB -16 dB -16 5.5 dB m 43 +5dBm /2 tone separated by 1MHz dB m 21 At 100MHz dB -11 dB -11 dB m 37 +5dBm /2 tone separated by 1MHz dB m 21 At 800MHz dB 4 C SO dB c -63 135 channels,+ 37dB mV/ch,Single C TB dB c -60 135 channels,+ 37dB mV/ch,Single XMD dB c -55 135 channels,+ 37dB mV/ch,Single CSO d Bc -7 0 8 chan nels ,+45 dBmV/ch ,Sing le CT B dB c -73 8 channels,+45dBm V/ch,Single XMD dB c -70 8 channels,+45dBm V/ch,Single S11-Input Return Loss S22-Output Return Loss OIP3 Noise Figure Reverse ( 3 ~ 200MHz ) Forwar d ( 50 ~ 870MHz ) 50 - 870MHz 3 - 150MHz Noise Figure S11-Input Return Loss S22-Output Return Loss OIP3 OIP1 OIP1 Parameter Frequency R ange Supply Voltage Single Ende d CATV Evaluation Circuit Current S21-Gain S21-Gain S21-Gain Package : SOIC-8

▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ rfsales@rfhic.com ▪ Version 6.0 10nF 10nF 1.8nH 10nF 10nF 10nF 240 ohm 10nF 100nF 10nF 10nF240 ohm 1nF 560nH 1nF 560nH RF IN RF OUT 4.7uF/16VVcc Vcc 4.7uF/16V AP230 680 ohm L1 D32212 100nF 0.5pF Application 1 : Forward (50MHz ~ 2150MHz) -25 -20 -15 -10 -30 Frequency(GHz) Magnitude(dB) 2.5 3.5 4.5 5.5 50 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 Frequency(MHz) Noise Figure(dB) 50 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 Frequency(MHz) P1dB(dBm) 50 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 Frequency(MHz) Noise Figure(dB) Level: +37dBmV Tilt: 135CH FLAT FRQ XMD(NCTA) CTB_RAW CTB_COR N-FLR CSU_RAW CSU_COR CSU_FRQ CSL_RAW CSL_COR CSL_FRQ P1dB OIP3 Evaluation Board Layout 50-870MHz S-Parameters The transformers L1 and L2, used on the RFHIC evaluation board are hand wound baluns with following spec[L1=3.5turn, ferrite core (Ferronics 12-340-k), L2=3.5 turn, ferrite core(TDK,L6 RID 3*3*3 H1.2)] was used. φ0.12 1UEW wire was used. An SMT transformer (D32212,D31766), can also be used. Noise Figure S21 S11 S22

▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ rfsales@rfhic.com ▪ Version 6.0 5 50 100 150 200 250 Frequency(MHz) OIP3(dBm) Application 2 : Reverse (3MHz ~ 200MHz) -30 -20 -10 0 30 60 90 120 150 180 210 240 270 300 Frequency(MHz) Magnitude(dB) S22 S11 S21 5 50 100 150 200 250 Frequency(MHz) Noise Figure(dB ) 5 50 100 150 200 250 Frequency(MHz) dBm S-Parameters Noise Figure P1dB OIP3 Level: +45dBmV Tilt: 8CH FLAT FRQ XMD(NCTA) CTB_RAW CTB_COR N-FLR CSU_RAW CSU_COR CSU_FRQ CSL_RAW CSL_COR CSL_FRQ Evaluation Board Layout 5-200MHz The transformers L1 and L2, used on the RFHIC evaluation board are hand wound baluns with following spec[L1=6 turn, ferrite core (TAIYO-YUDEN BF56 1UEW wire was used. An SMT transformer (D31044,D31766), can also be used. AP230 100pF 7.5pF 10 ohm RF IN 1uF 22nF 22nF R0 3.3uF 4.7uH 1nF 100pF 4.7uH 1nF 100pF Vcc 4.7uF/16V 3.3uF RF OUT 1uFD31250 4.7uF/16VVcc

▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ rfsales@rfhic.com ▪ Version 6.0 For a safe use in all situations, it is recommended to have proper ESD control techniques while the device is being handled. He re are some recommended precautions; - Person at a workbench should be earthed via a wrist strap and a resistor. - All mains-powered equipment should be connected to the mains via an earth-leakage switch. - Equipment cases should be grounded. - Relative humidity should be maintained between 40% and 50%. - An ionizer is recommended. - Keep static materials, such as plastic envelopes and plastic trays etc. away from the workbench Package : SOIC-8 Type ESD Protection PIN No Description

1 RF IN(2)

5 RF OUT(1)

4 RF IN(1)

8 RF OUT(2)

2, 3, 6, 7 GND Exposed slug GND Package Dimensions (Type: SOIC-8) AMP1 AMP2 Block Diagram Recommended Pattern RFHIC Corporation (RFHIC) reserves the right to make changes to any products herein or to discontinue any product at any time w ithout notice. RFHIC do not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, inclu ding without limitation consequential or incidental damages. The product specifications herein expressed have been carefully checked and are assumed to be reliable. However, RFHIC disclaims liability for inaccuracies and strongly recommends buyers to verify that the information they are using is current before placing purchase or ders. RFHIC products are not intended for use in life support equipment or application where ma lfunction of the product can be expected to result in persona l injury or death. Buyer uses or sells such products for any such unintended or unauthorized applicatio n, buyer shall indemnify, protect and hold RFHIC and its direct ors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such use. RFHIC’s liability under or arising out of damages, claims of whatsoever kind and nature which RFHIC products could cause shall be limited in amount to the net purchase price of the products sold to buyer by RFHIC.