AN3986FBP

AN3986FBP PANASONIC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 14

Technical content

The AN3986FBP and the AN3986FHP are stereo audio signal processor ICs for 8-mm camcorder. It incorporates all the functions needed for stereo-audio signal process- ing in 8mm camcorder. n Features

• Built-in headphone amplifiers
• Built-in matrix signal processing AN3986FBP, AN3986FHP Stereo Audio Signal Processor ICs for 8-mm Camcorder Supply voltage Power dissipation Note 2) Operating ambient temperature Note 1) Storage temperature Note 1) V CC PD Topr Tstg V CC1 =6 / VCC2 =9.5 392 –20 to + 70 –55 to + 125 V mW Parameter Symbol Rating Unit Note 1) Ta=25˚C except operating ambient temperature and storage temperature unless otherwise specified. Note 2) Allowable power dissipation of the package at Ta=70˚C. AN3986FHP Supply voltage Power dissipation Note 2) Operating ambient temperature Note 1) Storage temperature Note 1) V CC PD Topr Tstg V CC1 = 6 / VCC2 = 9.5 474 – 20 to + 70 – 55 to + 125 V mW Parameter Symbol Rating Unit n Absolute Maximum Ratings AN3986FBP Unit : mm 21.2–0.2 18.0–0.23.3max. 1.55–0.11.55–0.1 0.15 + 0.1 – 0.05 211 18.0–0.2 21.2–0.2 0.1 (0.6) 3.4 + 0.15 – 0.3 0.1–0.1 0.8 0.35 + 0.1 – 0.05 4363 AN3986FBP 84-Pin QFH Package (QFH084-P-1818) Unit : mm 80-Pin QFH Package (QFH080-P-1212) 12.0–0.2 14.0–0.2 12.0–0.2 14.00.2 (0.5) (min0.25) 1.3–0.1 1.3–0.1 2.8–0.2 0.15– 0.05 + 0.1 0.1–0.1 0.5 0.2 AN3986FHP

ICs for Video CameraAN3986FBP , AN3986FHP + 10µF 10µF+ 2.2µF 0.01µF50kW VR 10kW 5.6kW 4.7µF 47µF4 . 7 µF 4700pF 4700pF +4.7µF 4.7µF 100µF 4.7µF0.01µF +1µF 4.7µF 10µF 65 41 4445464748495051525354555657585960616263 2019181716151413121110987654321 V CC Rch Output Convert 6.8kW 0.01µF 0.01µF BPF 1µF 0.01µF 0.01µF 0.01µF 0.047µF ST MONO BIL ST to Control to Control to FMOUT 330pF 0.01µF 33kW MM + MUTE 8.2kW 0.01µF BPF 0.01µF LIM LPF HOLD PC VCO AL 10µF 10µF 2.2µF 0.01µF – + – + – + LP empha R R LS CCA 50kW VR 10kW 5.6kW 4700pF 4.7µF + 47µF4 . 7 µF LFP 4700pF 4700pF R R R R R RR Matrix to Control +4.7µFAGC Fade LPF LPF Vo1 47µFV REF 100µF 4.7µF 47µFV REFH 100µF 0.01µF 4.7µF + 100µF 0.01µF++4.7µF 10kW VR R V CCH 4700pF ControlVCO Adjust (R) FMOUT (R) ST/MONO Time constant HOLD 1 HOLD 2 Timing making PG GND PG Input MUTE Time constant MUTE detection FMOUT (L) VCO Adjuse (R) 0.01µF Input 3 (R) HP Vol Control Input 2 (R) Input 1 (R) V CC (4.75V) HP Output (R) HP GND (R) Line Output (R) V CCH (8.2V) V REFH Line Output (L) HP GND (L) HP Output (L) V REF Input 1 (L) AGC Time Constant Input 2 (L) Input 3 (L) PB/Rec Change (PB ) H Fade Control R 64 42 R M U T E 1 H G N D Bil MONO ST I O Detect Output Input change S PL R ST ON Auto OFF H G N D I O Output change Matrix Control to Pin37 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 17 18 19 2016 4142434445464748495051525354555657585960 Note) A number with a circle denotes a pin No. of the AN3986FBP, while a number with a square denotes a pin No. of the AN3986FHP. n Block Diagram Parameter Symbol Range Operating supply voltage range V CC1 V CC2 4.5V to 5.5V 4.5V to 9.0V n Recommended Operating Range (Ta=25˚C)

ICs for Video Camera AN3986FBP , AN3986FHP Pin No. Pin name Pin No. Pin name NR input/output GND Dev. adjustment 1 Dev. adjustment 2 LP emphasis Level sensor timing C1 Level sensor timing C2 Level sensor input GND LPF output CCA amp. input CCA output CCA input Buffer output FM emphasis NR emphasis Mode discriminator output Mute control Input change switch GND Input 3 Rec/PB switching Input 2 AGC time-constant Input 1 V REF Headphone output Headphone GND Line output V REF H V CC2 Line output Headphone GND Headphone output V CC1 Input 1 Fade control Input 2 Headphone volume control Input 3 GND SP/EP mode switching Output switching control Matrix control NR emphasis FM emphasis Buffer input CCA input CCA output CCA amp. input LPF output GND Level sensor input Level sensor timing C2 Level sensor timing C1 LP emphasis Dev. adjustment 2 Dev. adjustment 1 GND NR input/output VCO frequency adjustment FM modulator output FM demodulator input FM detector input FM input AGC detection ST/MON time-constant HOLD 2 HOLD 1 ST/MON detection Bilingual timing generation V CC1 (FM) Mono/multi time-constant GND (PG) PG input MUTE time-constant MUTE detection FM detection input FM demodulator input FM modulator output VCO frequency adjustment n Pin Descriptions (L) (L) (L) (L) (L) (L) (L) (L) (L) (L) (L) (L) (L) (L) (L) (L) (L) (L) (L) (L) (L) (R) (R) (R) (R) (R) (R) (R) (R) (R) (R) (R) (R) (R) (R) (R) (R) (R) (R) (R) (R) (R) (R) (R) (R) (L) (L) (L) (L) AN3986FHP AN3986FBP AN3986FHP AN3986FBP Note) Pins11, 32, 53, and 74 of the AN3986FBP are to be left open.

ICs for Video CameraAN3986FBP , AN3986FHP Parameter Symbol Condition min typ max Unit IR35Circuit current 1 at recording 58 73 88 mA IR31Circuit current 2 at recording 1.6 2.4 mA IP35Circuit current 1 at playing back 61 93 mA 2.0 IR31Circuit current 1 at playing back 1.6 2.4 mA2.0 Line AGC output level Lch, Rch V OALL V OALR – 8 – 7 – 6 dBs Line AGC output distortion factor Lch, RchTHALL1 THALR1 0.02 0.1 % AGC ON output level Lch, Rch V OALL2 V OALR2 – 4 – 1 + 2 dBs AGC ON output distortion factor Lch, RchTHALL2 THALR2 0.2 0.4 % Line AGC output noise Lch, Rch V NALL V NALR – 78 – 74 dBs Fade control maximum attenuation output Lch, Rch V FALL V FALR – 80 – 75 dBs Line through monitor output level Lch, Rch V O1LL V O1LR – 8 – 7 – 6 dBs Line through monitor output noise Lch, Rch V NLLL V NLLR – 81 – 77 dBs Between inputs between channels crosstalk – 78 – 74 dBV CTIN E-E monitor output frequency characteristics Lch, Rch V OLFL V OLFR – 5.5 – 2.5 dBs HP output level VOL = CENTER Lch, Rch V HC8L V HC8R – 28 – 26 – 24 dBs HP output distortion factor V OL = CENTER Lch, Rch THHC8L THHC8R 0.05 0.5 % HP output level VOL = MAX Lch, Rch V HH8L V HH8R – 18 – 16 – 14 dBs HP output level VOL = MIN Lch, Rch V HL8L VHL8R – 96 – 92 dBs HP output noise voltage VOL = MIN Lch, Rch V NHCOL V NHCOR – 96 – 92 dBs HP maximum output level V OL = CENTER Lch, Rch V MHH8L V MHH8R – 18 dBs – 18 – 15 – 12 dBs 0.4 % – 21 – 19 dB 0.2 – 20 3.8 5.8 dB4.8 LP encode f characteristics Lch, Rch V FLRLL V FLRLR 2.0 3.0 4.0 dB Encode output noise Lch, Rch V NRRL V NRRR – 55 – 51 dB ST/BIL level difference L + R Lch – 0.5 0 + 0.5 dB ST/BIL level difference L – R Lch – 30 – 17.5 dB Encode output level Lch, Rch Encode output distortion factor Lch, Rch Encode linearity Lch, Rch SP encode f characteristics Lch, Rch V BSRLR V BSRLL V FORLL V FORLR V OXLL V OXLR THORLL THORLR V ORLL V ORLR MON/BIL level difference Lch – 0.5 0 + 0.5 dB Decode reference output level Lch, RchV OLPL V OLPR – 9.5 – 7 – 4.5 dB V CC1 = 4.75V, when no signal input V CC2 = 8.20V, when no signal input V CC1 = 4.75V, when no signal input V CC2 = 8.20V, when no signal input V IN= 20dBs f= 400Hz V IN= 20dBs f= 1kHz, THD 5th V IN= – 2dBs f= 400Hz V IN= – 2dBs f= 1kHz, THD 5th No input A curve filter No input A curve filter V IN= – 20dBs, 1kHz A curve filter No input A curve filter V IN= – 20dBs, 400Hz V IN= –14dBs, 1kHz A curve filter V IN= – 20dBs ratio of 40kHz/40Hz V IN= – 20dBs, 400Hz 8W load V IN= – 20dBs, 1kHz 8W load, THD 5th V IN= – 20dBs, 400Hz 8W load V IN= – 20dBs, 400Hz 8W load 1kHz, at 1% distortion, 8W load THD 5th V IN= – 20dBs, 400Hz BIL mode V IN= – 20dBs, 1kHz to THD 5th V IN= – 11.2/–51.2BS f= 400Hz V IN= – 20dBs f= 10kHz/400Hz V IN= – 20dBs, 10kHz ratio of LP/SP No input A curve filter V IN= – 20dBs, 400Hz V IN= – 20dBs, 400Hz 30kHz LPF V IN= – 20dBs, 400Hz V OLL , input VORLR V BMRLL n Electrical Characteristics (cont.) (VCC1 = 4.75V, VCC2 = 8.2V, Ta= 25–2˚C) (AN3986FHP)

ICs for Video Camera AN3986FBP , AN3986FHP n Electrical Characteristics (cont.) (VCC1 = 4.75V, VCC2 = 8.2V, Ta= 25–2˚C) (AN3986FHP) Decode reference output distortion factor Lch, Rch THOLPL THOLPR 0.12 0.3 % Decode linearity Lch, Rch V OXPL V OXPR – 63 – 60 – 57 dB Decode output noise Lch, Rch – 87 – 79 dBs Crosstalk Lch, Rch, at playback C ERL C ERR – 79 dBs Maximum output level Lch, Rch, at playback V OLML V OLMR 0.4 1.0 % Line mute attenuation quantity Lch, RchV MLML V MLMR – 92 – 87 dBs Encode channel crosstalk Lch, Rch SERL SERR – 50 – 47 dBs E–E system monitor output channel balance – 0.55 0 + 0.55 dB Encode output channel balance Decode output channel balance VCO free-run frequency Lch VCO free-run frequency Rch VCO output amplitude voltage Lch VCO output amplitude voltage Rch VCO 2nd harmonics output Lch VCO 2nd harmonics output Rch VCO reference frequency deviation Lch VCO reference frequency deviation Rch 1.50 1.70 500 450 – 50 – 50 – 50 – 50 + 2 + 3 1.65 1.85 548 493 –35 –35 – 40 – 40 dB dB MHz kHz mV P–P mV P–P dB dB dB dB B RE B LP FOL FOR V 79 V 62 V 79–2 V 62–2 V 79–3 V 62–3 B AL V NLPL V NLPR 90 120 150 kHz 45 60 75 kHz 96 110 128 kHz –128 –110 – 96 kHz 48 55 64 kHz – 48 kHz Boost start time Lch, Rch, at recording 200 µs Boost level Lch, Rch 69 d B FDOL FDRMX2 FDLMX1 FDOR FDRMX1 FDLMX2 V BSL V BSR TBSL TBSR – 64 – 55 – 2 1.35 1.55 456 410 Boost width Lch, Rch 1.1 1.3 1.5 ms Reference FM modulation distortion factor Lch, Rch 0.3 % FM demodulation output Lch –18 –15 –12 dBs FM demodulation output Rch –18 –15 –12 dBsV DER1 V DEL1 TBEL TBER THDL THDR 0.3 %FM demodulation output distortion ratio Lch THDEL1 V ORLL , input VORLR Vin= –11.6/ – 41.6dBs f= 400Hz No input A curve filter V IN= – 20dBs, 1kHz A curve filter V IN= –10dBs, 1kHz THD 5th V IN= – 20dBs, 1kHz A curve filter V IN= –14dBs, 1kHz A curve filter V OALR /VOALL DV= –195.2mV (–15dBs equivalent) DV= –195.2mV (–15dBs equivalent) input DV= – 617mV (–5dBs equivalent) input DV= + 617mV (–5dBs equivalent) input DV= – 617mV (–5dBs equivalent) input DV= + 617mV (–5dBs equivalent) time from PG input level difference due to gain-up time of gain-up Vin= –15dBs, f=1kHz THD 5th after demodulation DEV= – 30kHz fm= 400Hz DEV= – 60kHz fm= 400Hz DEV= – 60kHz fm=1kHz DEV= – 30kHz fm=1kHz Vin= 30mV P–P as 0dB f=1.5MHz 0.3 % –11 –14 –18 dB FM demodulation output distortion ratio Rch Dropout detection ON level THDER1 DODON Parameter Symbol Condition min typ max Unit VCO reference frequency deviation Lch VCO reference frequency deviation Rch Maximum frequency deviation 1 Lch Maximum frequency deviation 2 Lch Maximum frequency deviation 1 Rch Maximum frequency deviation 2 Rch V ORLR /VORLL V OLPR /VOLPL R= 8.2kW R= 6.8kW when f= 1.5MHz when f= 1.7MHz fundamental wave as 0dB fundamental wave as 0dB fundamental wave as 0dB fundamental wave as 0dB

ICs for Video CameraAN3986FBP , AN3986FHP n Electrical Characteristics (cont.) (VCC1 = 4.75V, VCC2 = 8.2V, Ta= 25–2˚C) (AN3986FHP) MUTE change-over ON level MUTE OFF hysteresis 246 d B AUTO MONO detection level – 9 –12 –16 dB AUTO MONO OFF hysteresis 135 d B Hold start time Lch Hold start time Rch – 9 –12 –16 dB 0.5 2.0 4 dB Hold end time Lch Hold end time Rch 1.0 1.0 1.5 1.5 2.0 2.0 µs Bilingual discrimination level 8.5 12.2 10.0 14.0 11.5 15.8 µs Bilingual discrimination level hysteresis Self recording playback level Lch Self recording playback level Rch 3d B 0.5 2 4 dB Self recording playback level (R/L) channel balance – 9.5 – 8.5 – 7.0 – 6.0 – 4.5 – 3.5 dBs Rec. holding voltage PB holding voltage 0 1.0 2.0 dB Line mute ON voltage 3.4 4.75 V Dropout off hysteresis width V 18MN V 22P THOSL THOSR V ATME V ATMS MUTOFF MUTON DODOFF V BIE1 THOFL THOFR V BIS1 B RPL V RPL V RPR V 22R Vin=30mV P–P as 0dB Vin=30mV P–P as 0dB f=1.5MHz time from PG input to hold start time from PG input to hold end Boost level Vin= – 20dBs, f=400Hz bilingual MODE Vin= – 20dBs, f=400Hz V RPR /VRPL Vin=30mV P–P as 0dB Vin=30mV P–P as 0dB f=1.7MHz Vin=30mV P–P as 0dB 0 1.4 V 3.4 4.75 V 0 1.4 V 3.9 4.75 V 2.1 2.7 V Line mute OFF voltage Input change-over selection voltage LINE 1 Input change-over selection voltage LINE 2 V 191 V 18MF V 192 0 0.8 VInput change-over selection voltage LINE 3V 193 SP mode holding voltage Output change-over selection voltage Lch 3.4 4.75 V Output change-over selection voltage Rch 0 1.4 V Output change-over selection voltage STE 3.9 4.75 V Matrix control holding voltage ON 2.1 2.7 V 0 0.8 V 3.9 4.75 V 2.1 2.7 V 0.8 V V 43L V 43M V 43H V 42L V 42S V 44M V 44H V 44L 0 LP mode holding voltage Matrix control holding voltage AUTO Matrix control holding voltage OFF PG input voltage high level Discrimination output voltage BIL 3.4 4.75 V Discrimination output voltage MON 0 1.4 V Discrimination output voltage STE 3.4 4.75 V 1.5 2.6 V 0 0.8 V V 74L V 74H V 17H V 17M V 17L PG input voltage low level µs dBs µs Parameter Symbol Condition min typ max Unit

ICs for Video Camera AN3986FBP , AN3986FHP IR37Circuit current 1 58 73 88 mA IR33Circuit current 2 1.6 2.4 mA IP37Circuit current 1 61 93 mA 2.0 IP33Circuit current 2 1.6 2.4 mA 2.0 Line AGC output level Lch, Rch V OALL V OALR – 8 – 7 – 6 dBs Line AGC output distortion rate Lch, Rch THALL1 THALR1 0.02 0.1 % AGC ON output level Lch, Rch V OALL2 V OALR2 – 4 – 1 +2 dBs AGC ON output distortion rate Lch, Rch THALL2 THALR2 0.2 0.4 % Line AGC output noise Lch, Rch V NALL V NALR – 78 – 74 dBs Fade control maximum attenuation output Lch, Rch V FALL V FALR – 80 – 75 dBs Line through monitor output level Lch, Rch V O1LL V O1LR – 8 – 7 – 6 dBs Line through monitor output noise Lch, Rch V NLLL V NLLR – 81 – 77 dBs Between inputs between channels crosstalk – 78 – 74 dBsV CTIN E–E monitor output frequency characteristics Lch, Rch V OLFL V OLFR – 5.5 – 2.5 dB HP output level VOL = CENTER Lch, Rch V HC8L V HC8R –28 – 26 – 24 dBs HP output distortion factor V OL = CENTER Lch, Rch THHC8L THHC8R 0.05 0.5 % HP output level VOL = max. Lch, Rch V HH8L V HH8R –18 – 16 – 14 dBs HP output level VOL = min. Lch, Rch V HL8L VHL8R – 96 – 92 dBs HP output noise voltage VOL = CENTER Lch, Rch V NHCOL V NHCOR – 96 – 92 dBs HP maximum output level V OL = CENTER Lch, Rch V MHH8L V MHH8R –18 dBs –18 –15 –12 dBs 0.4 % – 21 –19 dB 0.2 – 20 3.8 5.8 dB4.8 LP encode f characteristics Lch, Rch V FLRLL V FLRLR 2.0 3.0 4.0 dB Encode output noise Lch, Rch V NRRL V NRRR – 55 – 51 dB ST/BIL level difference L + R Lch – 0.5 0 + 0.5 dB ST/BIL level difference L – R Rch – 30 –17.5 dB Encode output level Lch, Rch Encode output distortion factor Lch, Rch Encode linearity Lch, Rch SP encode f characteristics Lch, Rch V BSRLR V BSRLL V FORLL V FORLR V OXLL V OXLR THORLL THORLR V ORLL V ORLR MON/BIL level difference Lch – 0.5 0 + 0.5 dB Decode reference output level Lch, RchV OLPL V OLPR –9.5 – 7 – 4.5 dB V CC1 = 4.75V, at recording V CC2 = 8.20V, at recording V CC1 = 4.75V, at recording V CC2 = 8.20V, at recording V IN = 20dBs f = 400Hz V IN = 20dBs f =1kHz, THD 5th V IN = –2dBs f = 400Hz V IN = –2dBs f =1kHz, THD 5th No input A curve filter No input A curve filter No input A curve filter V IN = –20dBs, 1kHz A curve filter V IN = –20dBs, 400Hz V IN = –14dBs, 1kHz A curve filter V IN = –20dBs ratio of 40kHz/400Hz V IN = –20dBs, 400Hz 8W load V IN = –20dBs, 1kHz 8W load, THD 5th V IN = –20dBs, 400Hz 8W load V IN = –20dBs, 400Hz 8W load No input A curve filter 1kHz, at 1% distortion, 8W load THD 5th V IN = –20dBs, 400Hz BIL mode V IN = –20dBs, 1kHz to THD 5th V IN = –11.2/–51.2dBs f = 400Hz V IN = –20dBs f = 10kHz/400Hz V IN = –20dBs, 10kHz ratio of LP/SP V IN = –20dBs, 400Hz V IN = –20dBs, 400Hz 30kHz LPF V IN = –20dBs, 400Hz V OLL , input VORLR V BMRLL n Electrical Characteristics (VCC1 =4.75V, VCC2 =8.2V, Ta=25–2˚C) (AN3986FBP) Parameter Symbol Condition min typ max Unit

ICs for Video CameraAN3986FBP , AN3986FHP Decode reference output distortion rate Lch, Rch THOLPL THOLPR 0.12 0.3 % Decode linearity Lch, Rch V OXPL V OXPR – 63 – 60 –57 dB Decode output noise Lch, Rch – 87 –79 dBs Crosstalk Lch, Rch, at playback C ERL C ERR –79 dBs Maximum output level Lch, Rch, at playback V OLML V OLMR 0.4 1.0 % Line mute attenuation quantity Lch, RchV MLML V MLMR – 92 – 87 dBs Encode channel crosstalk Lch, Rch SERL SERR – 50 – 47 dBs E–E system monitor output channel balance – 0.55 0 + 0.55 dB Encode output channel balance Decode output channel balance VCO free-run frequency Lch VCO free-run frequency Rch VCO output amplitude voltage Lch VCO output amplitude voltage Rch VCO 2nd harmonics output Lch VCO 2nd harmonics output Rch VCO 3rd harmonics output Lch VCO 3rd harmonics output Rch 1.50 1.70 500 450 –50 –50 –50 –50 + 2 + 3 1.65 1.85 548 493 –35 –35 – 40 – 40 dB dB MHz kHz mV P–P mV P–P dB dB dB dB B RE B LP FOL FOR V 83 V 65 V 83–2 V 65–2 V 83–3 V 65–3 B AL V NLPL V NLPR VCO reference frequency deviation Lch 90 120 150 kHz VCO reference frequency deviation Rch 45 60 75 kHz Maximum frequency deviation 1 Lch 96 110 128 kHz Maximum frequency deviation 2 Lch –128 –110 – 96 kHz Maximum frequency deviation 1 Rch 48 55 64 kHz Maximum frequency deviation 2 Rch – 48 kHz Boost start time Lch, Rch, at recording 200 µs Boost level Lch, Rch 69 d B FDOL FDRMX2 FDLMX1 FDOR FDRMX1 FDLMX2 V BSL V BSR TBSL TBSR – 64 –55 – 2 – 3 1.35 1.55 456 410 Boost width Lch, Rch 1.1 1.3 1.5 ms Reference FM modulation distortion ratio Lch, Rch 0.3 % FM demodulation output voltage Lch –18 –15 –12 dBs FM demodulation output voltage Rch –18 –15 –12 dBsV DER1 V DEL1 TBEL TBER THDL THDR 0.3 %FM demodulation output distortion ratio Lch THDEL1 0.3 % –11 –14 –18 dB FM demodulation output distortion ratio Rch Dropout detection ON level THDER1 DODON n Electrical Characteristics (cont.) (VCC1 = 4.75V, VCC2 = 8.2V, Ta= 25–2˚C) (AN3986FBP) Parameter Symbol Condition min typ max Unit V ORLL , input VORLR Vin= –11.6/– 41.6dBs f= 400Hz No input A curve filter V IN= –20dBs, 1kHz A curve filter V IN= –10dBs, 1kHz THD 5th V IN= –20dBs, 1kHz A curve filter V IN= –14dBs, 1kHz A curve filter V ORLR /VORLL V OLPR /VOLPL R= 8.2kW R= 6.8kW when f=1.5MHz when f=1.7MHz fundamental wave as 0dB fundamental wave as 0dB fundamental wave as 0dB fundamental wave as 0dB V OALR /VOALL DV= –195.2mV (–15dBs equivalent) DV= –195.2mV (–15dBs equivalent) input DV= – 617mV (–5dBs equivalent) input DV= + 617mV (–5dBs equivalent) input DV= – 617mV (–5dBs equivalent) input DV= + 617mV (–5dBs equivalent) time from PG input level difference due to gain-up time of gain-up Vin= –15dBs, f= 1kHz THD 5th after demodulation DEV= –30kHz fm= 400Hz DEV= –60kHz fm= 400Hz DEV= –60kHz fm= 1kHz DEV= –30kHz fm=1kHz Vin=30mV P–P as 0dB f=1.5MHz

ICs for Video Camera AN3986FBP , AN3986FHP MUTE change-over ON level MUTE OFF hysteresis 246 d B AUTO MONO detection level – 9 –12 –16 dB AUTO MONO OFF hysteresis 135 d B Hold start time Lch Hold start time Rch – 9 – 12 – 16 dB 0.5 2.0 4 dB Hold end time Lch Hold end time Rch 1.0 1.0 1.5 1.5 2.0 2.0 µs Bilingual discrimination level 8.5 12.2 10.0 14.0 11.5 15.8 µs Bilingual discrimination level hysteresis Self recording playback level Lch Self recording playback level Rch 3d B 0.5 2 4 dB Self recording playback level (R/L) channel balance – 9.5 – 8.5 – 7.0 – 6.0 – 4.5 – 3.5 dBs Rec holding voltage PB holding voltage 0 1.0 2.0 dB Line MUTE ON voltage 3.4 4.75 V Dropout off hysteresis width V 19MN V 23P THOSL THOSR V ATME V ATMS MUTOFF MUTON DODOFF V BIE1 THOFL THOFR V BIS1 B RPL V RPL V RPR V 23R 0 1.4 V 3.4 4.75 V 0 1.4 V 3.9 4.75 V 2.1 2.7 V Line MUTE OFF voltage Input change-over selection voltage LINE 1 Input change-over selection voltage LINE 2 V 201 V 19MF V 202 0 0.8 VInput change-over selection voltage LINE 3V 203 SP mode holding voltage Output change-over selection voltage Lch 3.4 4.75 V Output change-over selection voltage Rch 0 1.4 V Output change-over selection voltage STE 3.9 4.75 V 2.1 2.7 V 0 0.8 V Matrix control holding voltage ON Matrix control holding voltage AUTO Matrix control holding voltage OFF 3.9 4.75 V 2.1 2.7 V 0.8 V V 45L V 45M V 45H V 44L V 44S V 46M V 46H V 46L 0 LP mode holding voltage PG input voltage high level Discrimination output voltage BIL 3.4 4.75 V Discrimination output voltage MON 0 1.4 V Discrimination output voltage STE 3.4 4.75 V 1.5 2.6 V 0 0.8 V V 78L V 78H V 18H V 18M V 18L PG input voltage low level µs dBs µs n Electrical Characteristics (cont.) (VCC1 = 4.75V, VCC2 = 8.2V, Ta= 25–2˚C) (AN3986FBP) Parameter Symbol Condition min typ max Unit Vin=30mV P–P as 0dB Vin=30mV P–P as 0dB f=1.5MHz time from PG input to hold start time from PG input to hold end Boost level Vin= –20dBs, f= 400Hz bilingual MODE Vin= –20dBs, f= 400Hz V RPR /VRPL Vin=30mV P–P as 0dB Vin=30mV P–P as 0dB f=1.7MHz Vin=30mV P–P as 0dB

ICs for Video CameraAN3986FBP , AN3986FHP Pin No. Waveform · Voltage Equivalent circuit Pin No. Waveform · Voltage Equivalent circuit n Pin Descriptions (VCC or GND pins are not shown) DC 2.38V DC 2.38V DC 2.38V LP EMPH 50µA 20kW Rec ON Rec 10kW 3.5kW 20µA 8.5kW Ope. amp. output DC 1.65V L.S IN 20µA 100µA 50µA DC 2.38V LPF OUT 20µA 50kW V REF DC 2.38V CCA IN DC 2.38V CCA OUT

2.38 VDC,

(63) (61) (60) (59) (58) 13 (51) (52) (54) (56) (57) Note) The indicated values are typical ones, and may depend on operating conditions or individual IC. V CC1 = 4.75V, and VCC2 = 8.2V A number without a square denotes a pin No. of the AN3986FBP, while a number with a square denotes a pin No. of the AN3986FHP.

ICs for Video Camera AN3986FBP , AN3986FHP DC 2.38V DC 2.38V DC 2.38V R/P SW DC 2.38V CCA IN 20kW VREF 50µA 5.6kW 10kW 4.04kW 11.91kW 100kW 50kW 50kW 50kW 50kW 50µA 2.5V MUTE SW14 (50) (45) (46) (24) (26) (38) (40) (42) (49)

• 24
• 26 Pin No. Waveform · Voltage Equivalent circuit Pin No. Waveform · Voltage Equivalent circuit n Pin Descriptions (cont.) (VCC or GND pins are not shown) Note) The indicated values are typical ones, and may depend on operating conditions or individual IC. V CC1 = 4.75V, and VCC2 = 8.2V A number without a square denotes a pin No. of the AN3986FBP, while a number with a square denotes a pin No. of the AN3986FHP.

ICs for Video CameraAN3986FBP , AN3986FHP DC 2.38V 4.1V V REF IN DC f=1.5MHz (1.7MHz) FM modulation output DC 2.3V 50µA 10kW 40kW 20kW 10µA Rec ON 600µA 10kW 100kW HOLD OFF HOLD OFF DC 2.38V RF IN 4VDC when not active, and 0VDC when active (31) (83) (67) (81) (82) (30) (34) (36) (44) (84) (71) Pin No. Waveform · Voltage Equivalent circuit Pin No. Waveform · Voltage Equivalent circuit n Pin Descriptions (cont.) (VCC or GND pins are not shown) Note) The indicated values are typical ones, and may depend on operating conditions or individual IC. V CC1 = 4.75V, and VCC2 = 8.2V A number without a square denotes a pin No. of the AN3986FBP, while a number with a square denotes a pin No. of the AN3986FHP.

ICs for Video Camera AN3986FBP , AN3986FHP MM 60kW 100kW 100kW 100kW 25kW 10kW 20kW 300kW f=30Hz, square wave Note) The indicated values are typical ones, and may depend on operating conditions or individual IC. V CC1 = 4.75V, and VCC2 = 8.2V A number without a square denotes a pin No. of the AN3986FBP, while a number with a square denotes a pin No. of the AN3986FHP. Pin No. Waveform · Voltage Equivalent circuit Pin No. Waveform · Voltage Equivalent circuit n Pin Descriptions (cont.) (VCC or GND pins are not shown) n Reference Power dissipation for the package AN3986FHP P D —Ta Ambient temperature Ta (˚C) 200 400 600 800 1,000 1,200 1,400 654 1,010 0 25 50 75 100 125 150 IC without heatsink R th–a=153˚C/W PD = 654mW (25˚C) On a glass-epoxy resin print board R th–a= 99˚C/W PD =1010mW (25˚C) Power dissipation PD (mW) NR decoder linearity characteristics – 80 – 60 – 40 – 20 0 – 80 – 60 – 40 – 20 Line output level (dBs) NR decoder input level (dBs) V CC1 = 4.75 (V) V CC2 = 8.20 (V) f= 400Hz

ICs for Video CameraAN3986FBP , AN3986FHP n Reference (cont.) –15 –10 –20 –14 –10 0 +10 0.01 0.02 0.05 0.1 0.2 Line AGC input/output characteristics V CC1 = 4.75 (V) V CC2 = 8.20 (V) Level measurement at f=400Hz Distortion measurement at f=1kHz THD 5th with a 30kHz LPF (Output level) (Output distortion) Line input level (dBs) Line output level (dBs) Line output distortion ratio (%) Temperature characteristics of FM record output deviation – 40 – 20 0 20 40 60 80 Temperature (˚C)

1.5 MHz side deviation (kHz)

1.7MHz side deviation (kHz) V CC1 = 4.75 (V) V CC2 = 8.20 (V) V in= – 20dBf f= 400Hz Line output level (dBs) Fade control voltage (V) –100 – 80 – 60 – 40 – 20 1234 4.750 Fade control output characteristics V CC1 = 4.75 (V) V CC2 = 8.20 (V) Vin= –20dBs f=1kHz Using a 30 kHz LPF 4 56789 Output subsystem supply voltage VCC2 (V) Line output maximum level (dBs) Line maximum output level V CC1 = 4.75 (V) THD 5th measured with a 1% distortion f=1kHz Using a 30kHz LPF 10kW load 1 10 30 100 –70 – 60 –50 Input carrier level (mVP–P) FM demodulator output noise (dBs)1.5MHz side 1.7MHz side V CC1 = 4.75 (V) V CC2 = 8.20 (V) –16dBs reference using a 30kHz LPF 5020235 Carrier level vs. FM demodulator output noise Headphone volume control output HP volume control voltage (V) HP output level (dBs) 8W39W Load 01234 4.752.275 –100 – 80 – 60 – 40 – 20 – 16dBs – 26dBs V CC1 = 4.75 (V) V CC2 = 8.20 (V) Vin= – 20dBs f= 400Hz 30kHz LPF