AN3479

AN3479FBP PANASONIC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 18

Technical content

VCR Signal(Luminance, Chroma and Normal Audio Signals) Process- ing IC n Overview The AN3479FBP is an IC designed for NTSC-dedicated VHS VCR signal processing and incorporates circuits for processing RF and normal audio signals as well as lumi- nance and chroma signals. n Features

• Compatible with I2C-bus
• Totally free of adjustments
• Low-frequency comb system
• An improved chroma S/N ratio ensured by built-in CNR and CPC(chroma phase compensator) circuits
• Compatible with SQPB n Applications
• VCR(NTSC) 21.2±0.2 18.0±0.2 21.2±0.20.1±0.1 0.1±0.1 3.25±0.2 63 43 12 1 (1.0) 0.6±0.2 0.35 +0.1 –0.05 0.15 +0.1 –0.05 Seating plane 0.80 0.6±0.2 0° to 10° 0.15 +0.10–0.05 QFH084-P-1818B Unit:mm

V CC (NA) Audio Tuner in Audio Line in GND(VCO) Audio Mute 2 fSC out REC-Y adj. GND(C) Audio out 1/2 VCC PB-C out V CC (C) SCL IN SDA IN Art V IN HSS OUT LINE1 Tuner V CC (Y) V REG Video out GND(Y) VV : PB-C IN AT-OUT RF in/out GND(RF) Rec.-C out or EXTERNAL REC RF or MAIN EMPH OUT or TEST2 PAL-M"L" or TEST1 MONITOR OUT TEST5/TEST6 V CC (RF) ROTARY IN VHS-H REC EQ peak f variable REC EQ LPF fC variable GND(NA) fH trap S/V det. trap RF AGC Rec. RF EQ Det. Det. AT 629 kHz trap Clamp Clamp Main LPF YNR mix. YNR process GCA Mute AGC AttAttAtt Det. DLY DOP Do HPFLim. ANR NLE NLDE Det.HSS Comp. Y/C mix. MOD W/D clip Peaking BPF & GCA Sub LPF DEM I2C bus D-lim. ENV DO AGC 1/4 Rotary Side lock AFC APC ACCBM1 BM2 LPF1 LPF2GCACCD LPF I2C όε Det. BPF2 Det. Killer Rec. amp. Rec. LPF Sub LPF RF in

4 Phase

Comp. BPF1 4.8 M trap Att CPC CNR BPF

• 2 Det. To BM1&BM2 VCO 1/4 Sub BM FDET Burst up/ down Comb amp. DP ID CCD LPF Clamp Clamp Y/C mix. LP/SLP-on PB-off SLP -on SP/LP -on EE -on4 850 W 1 250 W Rec. -off DOP External S-VHS PB RF EQ out ANR CTL PIC CTL SCL in SDA in PB RF EQ peaking Nor Nor Test4 Test2 Internal peaking External peaking PB -Y Rec.-Y Rec.-C VV EE PB : off Int.Ext. HPFLim. W EE T L Mute VV EE VV PB Rec. CPN Zapping 1.E.E. 2.f O 3.deviation 4.Rec.-Y 5.Rec.-C 6.V-V 7.S/V-1th 8.W/C 9.VCO(for 3.58) Test monitor out PB comb mix. out CNR out Burst down ACC out Test 5/Test6 PBZD ZG Rec. Rec. PB PB Rec. Rec. PB Rec.-C out΁ PB PB ZM Rec. Rec. Rec. ZJ ZI PB fH 18 kW Test5΁ Test5΁ Test5΁ Test5΁ CPN PB BM1& BM2 NOR Test3 Tuner in Line1 in or OPN-Y in EE VV Line2in Nor Rec.-C out test2 EE EEEE VVVV VV EE Internal VHS PB RF EQ out or S-VHS PB RF EQ out CK off7 MODE PB Rec. Rec. ZL ZK ZE Comb CombComb Comb CM SP LP EP Trick PB

Pin No. Descriptions Impedance

1 CCD DL In (C)/CPN C In 32 k W

2 CCD AGC Det.(C) Push-pull

3 CCD DL Out(C) Push-pull

4 C-V CC ¾

5 Test5/Test Monitor Push-pull

6 PAL-M : "L"/TEST1 29.6 k W

7 SCL In Open base

8 SDA In Base collector

9 ACC Det. 920 + E.F. 10 C-Comb In 21.6 k W 11 Killer Det. Push-pull

12 C-Comb Out Push-pull

13 Artificial Sync. Pluse In 76.6 k W 14 HSS Out C.C. 15 Sync Sepa. Det. 500 + E.F.

16 Line2 In 105 k W

17 AGC Det. 60 + E.F.

18 Line1 In 105 k W

19 CCD AGC Det.(Y) Push-pull

20 Tuner In 105 k W

21 Lumi V CC ¾

22 VREG(2.0 V) E.F. 23 F.B.Clamp Det. 1 Push-pull 24 F.B.Clamp Det. 2 Push-pull 25 Video Out E.F. 26 F.B.Clamp Det. 4 Push-pull

27 CCD DL In(Y) 30 k W

28 Lumi Gnd ¾

29 CCD DL Out(Y) Push-pull

30 YNR Lim DC 10 k W

31 Main Emphasis F.B. In 5.6 k W 32 F.B.Clamp Det. 3 Push-pull 33 TEST2 Monitor E.F.

34 PB RF C In 20 k W

35 External Trap 540 W

Pin No. Descriptions Impedance 36 REC RF EQ Peak Gain Adj. 125 kW 37 Peaking E.F. 38 Main De-emphasis Out 5.6 k W 39 Auto Tracking Gain Adj. 90 k W 40 Auto Tracking Out C.C

41 RF In/Out 27 kW /Push-pull

42 RF GND ¾

43 RF AGC Det. 540 W + E.F. 44 Phase Shift POS./S-EQ Out Push-pull 45 Phase Shift NEG. Push-pull 46 8M Trap In 10 k W

47 RF V CC ¾

48 PB RF EQ Peaking E.F. (Normally open)

49 Rotary Pulse In 400 k W

50 S EQ In 30 k W

51 S/V Det.(VHS : "H") 2.1 k W + E.F. 52 REC RF EQ Peak F Adj. 125 k W 53 REC RF EQ LPF f C Adj. 125 k W

54 PB RF EQ INT/EXT SW Open base

55 Y MAIN LPF A/B SW 35 k W

56 NA SW Control Out Open collector

57 NA PB Amp. In 35 k W 58 NA PB EQ Out E.F. 59 NA PB NF 800 W + E.F.

60 NA PB In PB : 80 k W

Rec. : E.F. 61 NA PB EQ SW SP/LP : E.F. SLP : 12.5 kW

62 NA PB SLP SW SP/LP : 100 kW

SLP : <100 W

63 NA GND ¾

64 NA Auto Bias Detector In C in

65 NA Rec. Out Push-pull 66 NA Rec. NF 5 k W

Parameter Symbol Range Unit Supply voltage V CC 4.7 ~ 5.3 V n Recommended Operating Range Note) *1: Ta = 25 °C except operating ambient temperature and storage temperature. *2: Power dissipation of the package at Ta = 70 °C. n Absolute Maximum Ratings Parameter Symbol Rating Unit Supply voltage V CC 5.5 V Supply current I CC 222 mA Power dissipation *2 PD 958 mW Operating ambient temperature *1 Topr -20 ~ +70 °C Storage temperature *1 T stg -55 ~ +150 °C n Pin Descriptions(continued) Pin No. Descriptions Impedance

67 NA REC EQ LP/SLP SW SP : 100 k W

LP/SLP : Push-pull

68 NA V CC ¾

69 NA Line Out Push-pull

70 NA AGC Det 222 W + E.F.

71 NA Tuner In 30 k W

72 NA V REF 25 kW

73 NA Line In 30 k W

74 VCO Gnd ¾

Pin No. Descriptions Impedance

75 NA Mute 211 k W

76 REC C Adj 200 k W

77 C Gnd ¾

78 REC AFC/PB APC Det Collector base

79 2f SC Out/fsc Out Push-pull 80 Side Lock Det C.C.

81 XO/VCXO Out Push-pull

82 XO/VCXO In 1 900 W

83 REC Y Adj. 105 kW

84 REC APC Det Collector base

n Electrical Characteristics Ta = 25 °C –2 °C Parameter Symbol Conditions min. typ. max. Unit Circuit current 1 I REC V CC = 5 V,Rec.- mode 116 140 175 mA Circuit current 2 I PB V CC = 5 V,PB-mode 125 150 188 mA Acknowledge output driver current IACK V CC = 5 V 1.8 2.5 5.0 mA SCL, SDA signals input "H"level VSHI V CC = 5 V 3.1 ¾ 5.0 V SCL, SDA signals input "L"level VSLO V CC = 5 V 0 ¾ 0.9 V SCL clock frequency f SCL V CC = 5 V ¾¾ 100 kHz Video EE output amplitude V EE Video(W -100 %),1 VPP 1.995 2.100 2.205 V PP In : Pin18,Out : Pin25 Y tuner/line 1 crosstalk CT TL1 Sin 100 mVPP,1 MHz ¾¾ - 45 dB In : Pin18,Out : Pin25 Y line 2/line 1 crosstalk CT L2L1 Sin 100 mVPP,1 MHz ¾¾ - 45 dB In : Pin18,Out : Pin25 Y tuner/line 2 crosstalk CT TL2 Sin 100 mVPP,1 MHz ¾¾ - 45 dB In : Pin16,Out : Pin25 Y line 1/line 2 crosstalk CT L1L2 Sin 100 mVPP,1 MHz ¾¾ - 45 dB In : Pin16,Out : Pin25 Y line 1/tuner crosstalk CT L1L Sin 100 mVPP,1 MHz ¾¾ - 45 dB In : Pin20,Out : Pin25 Y line 2/tuner crosstalk CT L2T Sin 100 mVPP,1 MHz ¾¾ - 45 dB In : Pin20,Out : Pin25 Keyed AGC control sensitivity SKAGC Video(W -100 %),2.0 VPP/0.5 VPP ¾¾ 1.0 dB In : Pin18,Out : Pin25 Y AGC frequency characteristicDG AGC Sin 100 mVPP,5 MHz/1 MHz - 1.5 ¾ 0.5 dB In : Pin18,Out : Pin25 Y MLPF frequency DG YL1 Sin 100 mVPP,2.7 MHz/320 kHz - 7.8 - 6.3 - 4.8 dB characteristic 1 In : Pin18,Out : Pin5 Y MLPF frequency DG YL2 Sin 100 mVPP,3.58 MHz/320 kHz ¾¾ - 29 dB characteristic 2 In : Pin18,Out : Pin5 Y MLPF group delay 1 t DYL1 Sin 100 mVPP,320 kHz 970 1 050 1 130 ns In : Pin18,Out : Pin5 Y MLPF group delay 2 t DYL2 Sin 100 mVPP,1.8 MHz -100 -70 -40 ns In : Pin18,Out : Pin5 Sync.-sepa. min. input S SS Video(W -100 %) ¾¾ 33 % sensitivity In : Pin18,Out : Pin14 In : Pin18,Out : Pin14 Sync.-sepa. output amplitude VSS Video(W -100 %),1 VPP,LP-mode 4.0 ¾¾ V PP In : Pin18,Out : Pin14

n Electrical Characteristics(continued) Ta = 25 °C –2 °C Parameter Symbol Conditions min. typ. max. Unit Vertical emphasis(1-K)value G VE1 Sin 400 mVPP(Pin5)150 kHz,LP-mode -3.0 -1.5 0 dB gain 1 In : Pin18,Out : Pin29 Vertical emphasis(1-K)value G VE2 Sin 400 mVPP(Pin5)2 MHz,LP-mode -1.5 0 1.5 dB gain 2 In : Pin18,Out : Pin29 Vertical emphasis differential VVE Video(W-100 %),1 VPP ¾¾ 100 mV PP signal amplitude In : Pin18,Out : Pin30 Vertical emphasis X-value gain GVEX Sin 40 mVPP,150 kHz,Pin31 : open -15.0 -11.5 -8.0 dB In : Pin30,Out : Pin33 Non-linear emphasis frequencyDG NLE1 Sin 400 mVPP(0 dB),2 MHz/100 kHz - 0.2 ¾ 1.0 dB characteristic 1 SLP/EDIT-mode In : Pin18,Out : Pin33 Non-linear emphasis frequencyDG NLE2 Sin 40 mVPP(-20 dB),1 MHz/100 kHz 3.67 ¾ 6.47 dB characteristic 2 SLP/EDIT-mode In : Pin18,Out : Pin33 Non-linear emphasis frequencyDG NLE3 Sin 40 mVPP(-20 dB),2 MHz/100 kHz 4.24 ¾ 7.24 dB characteristic 3 SLP/EDIT-mode In : Pin18,Out : Pin33 Non-linear emphasis frequencyDG NLE4 Sin 40 mVPP(-20 dB),2 MHz -1.76 ¾ 0.84 dB characteristic 4 SP/SLP-mode In : Pin18,Out : Pin33 Main emphasis gain G ME Sin 60 mVPP(Pin5),150 kHz 13.1 ¾ 15.5 dB Pin31 : 0.1 mF In : Pin18,Out : Pin33 Dark clip level DC Video(W-100 %),1 V PP 51 61 71 % In : Pin18,Out : Pin33 White clip level WC Video(W-100 %),1 V PP 190 200 210 % In : Pin18,Out : Pin33 FM carrier interleave DfCI fH Pulse,5 VPP,SLP-mode 6.8 ¾ 9.0 kHz In : Pin49,Out : Pin33 Sync. tip frequency f O Out : Pin 33 3.43 3.50 3.57 MHz FM deviation DfDEV Video(W-100 %),1 VPP 0.95 1.00 1.05 MHz In : Pin18,Out : Pin33 Rec. FM output amplitude V YR No input 188 200 212 mV PP In : Pin18,Out : Pin41 FM modulator 2nd harmonic D 2FMOD Out : Pin33 ¾¾ - 35 dB distortion Rec. Y output variable range max.uRY1 No input -8.5 ¾- 3.5 dB In : Pin18,Out : Pin41 Rec. Y output variable range min.uRY2 No input 1.0 ¾ 6.0 dB In : Pin18,Out : Pin41 S/V discrimination frequency fSV Sin 350 mVPP,Frequency variable 4.25 4.40 4.55 MHz SQPB fi VHS In : Pin41,50,Out : Pin31

n Electrical Characteristics(continued) Ta = 25 °C –2 °C Parameter Symbol Conditions min. typ. max. Unit VHS-mode In : Pin46,Out : Pin38 FM demodulator sensitivity 2 SDEMS Sin 350 mVPP,5.4 MHz,7 MHz 1.4 1.6 1.8 ¾ SQPB-mode In : Pin50,Out : Pin38 Sub LPF frequency characteristicDG SL Sin 350 mVPP,4 MHz/3 MHz -1.9 - 0.4 1.1 dB In : Pin46,Out : Pin37 Drop-out detecter on level S DON Sin 350 mVPP(0 dB),4 MHz -21 -17 -13 dB In : Pin50,Out : Pin25 Drop-out detecter off level SDOFF Sin 350 mVPP(0 dB),4 MHz 0.9 2.5 4.5 dB (On level-off level) In : Pin50,Out : Pin25 Drop-out compensator inhibition tDOFF AM 350 mV PP,1 kHz,4 MHz 180 222 270 ms time In : Pin50,14,Out : Pin25 Drop-out compensator SW DC DV DOC AM 350 mV PP,4 MHz -125 0 125 mV offset In : Pin50,Out : Pin25 Non-linear de-emphasis frequencyDG NLD1 Sin 200 mVPP(0 dB),2 MHz/150 kHz -4.8 ¾- 1.8 dB characteristic 1 LP-mode In : Pin38,Out : Pin5 Non-linear de-emphasis frequencyDG NLD2 Sin 20 mVPP(-20 dB),2 MHz/150 kHz -9.3 ¾- 5.3 dB characteristic 2 LP-mode In : Pin38,Out : Pin5 Non-linear de-emphasis frequencyDG NLD3 Sin 20 mVPP(-20 dB),2 MHz 1.8 ¾ 4.2 dB characteristic 3 SP/LP-mode In : Pin38,Out : Pin5 Non-linear de-emphasis frequencyDG NLD4 Sin 20 mVPP(-20 dB),1 MHz/150 kHz -7.4 ¾- 3.4 dB characteristic 4 LP-mode In : Pin38,Out : Pin5 Non-linear de-emphasis frequencyDG NLD5 Sin 20 mVPP(-20 dB),100 kHz 0.3 ¾ 1.8 dB characteristic 5 SQPB/SLP-mode In : Pin38,Out : Pin5 CCD AGC control sensitivity V CCD fH pulse,800 mVPP-400 mV PP(Pin27) -23 ¾ 23 mV PP In : Pin38,Out : Pin29 YNR EDNC(1-K)value gain G EDK Sin 160 mVPP,150 kHz,LP/EDIT-mode 2.3 3.8 5.3 dB In : Pin38,Out : Pin29 YNR VNC(1-K)value gain G VNK Sin 160 mVPP,150 kHz,LP-mode 0.5 2.0 3.5 dB In : Pin38,Out : Pin29 YNR EDNC differential signal VED fH pulse 160 mVPP,LP/EDIT mode ¾¾ 100 mV PP amplitude In : Pin38,Out : Pin30

n Electrical Characteristics(continued) Ta = 25 °C –2 °C Parameter Symbol Conditions min. typ. max. Unit YNR VNC differential signal V VN fH pulse 160 mVPP,LP-mode ¾¾ 100 mV PP amplitude In : Pin38,Out : Pin30 YNR EDNC X-value gain G EDX Sin 40 mVPP,150 kHz,LP/EDIT-mode -2.7 - 0.7 1.0 dB In : Pin30,Out : Pin25 YNR VNC X-value gain G VNX Sin 40 mVPP,150 kHz,LP-mode 1.8 3.3 4.8 dB In : Pin30,Out : Pin25 YNR limiter output amplitude 1 VYL1 Sin 100 mVPP,150 kHz 12 25 90 mV PP In : Pin30,Out : Pin25 YNR limiter output amplitude 2 VYL2 Sin 300 mVPP,150 kHz 20 70 160 mV PP In : Pin30,Out : Pin25 YNR limiter output amplitude 3 VYL3 Sin 800 mVPP,150 kHz 25 85 190 mV PP In : Pin30,Out : Pin25 Noise canceller frequency DG NC1 Sin 12.6 mVPP(-30 dB),1 MHz/150 kHz -7 ¾- 1d B characteristic 1 Normal-mode In : Pin27,Out : Pin25 Noise canceller frequency DG NC2 Sin 12.6 mVPP(-30 dB),2 MHz/150 kHz -9 ¾- 3d B characteristic 2 Normal-mode In : Pin27,Out : Pin25 Picture control frequency DG PC1 Sin 100 mVPP,3 MHz,Sharpest -3.5 ¾ 0.5 dB characteristic 1 In : Pin27,Out : Pin25 Picture control frequency DG PC2 Sin 100 mVPP,3 MHz,Softest -8.5 ¾- 2.0 dB characteristic 2 In : Pin27,Out : Pin25 In : Pin27,Out : Pin25 Video VV output artifical V DCDV DV Pin13 = 5 V -80 0 80 mV offset Out : Pin25 In : Pin41,Out : Pin25 Rec. chrominance output V RC Video(Y+C),1 VPP 60.5 65.0 69.5 mV PP amplitude In : Pin18,Out : Pin41 Burst-up gain G BU Sin 300 mVPP,fSC ,SP-mode 5 6 7 dB In : Pin14,18,Out : Pin33 Burst-up DC offset DV BU Out : Pin41 ¾¾ 16 mV Rec. ACC control characteristic SACC1 Burst : Chroma = 1 : 1 ¾¾ 3d B 845 mV PP/53 mVPP,Rotary : "H" In : Pin14,18,Out : Pin5 VXO free-run frequency f VXO Out : Pin79 -100 ¾ 100 Hz VXO control characteristic bVXO Pin84 : DC,2.6 V,2.2 V, 1.0 ¾ 4.0 Hz/mV In : Pin14,Out : Pin79

n Electrical Characteristics(continued) Ta = 25 °C –2 °C Parameter Symbol Conditions min. typ. max. Unit Rec. killer on sensitivity S RKON Burst : Chroma=1 : 1,4.8 mVPP ¾¾ - 39 dB In : Pin18,Out : Pin41 Rec. killer off sensitivity SRKOFF Burst : Chroma=1 : 1,17 mVPP -22 ¾¾ dB In : Pin18,Out : Pin41 Rec. C MBPF frequency DG RBP1 Sin 286 mVPP,1.7 MHz/3.58 MHz ¾¾ - 15 dB characteristic 1 In : Pin18,Out : Pin5 characteristic 2 In : Pin18,Out : Pin5 characteristic 3 In : Pin18,Out : Pin5 Rec. C MBPF frequency DG RBP4 Sin 286 mVPP,7 MHz/3.58 MHz ¾¾ - 10 dB characteristic 4 In : Pin18,Out : Pin5 Rec. C MBPF group delay t DRBP Sin 286 mVPP,3.58 MHz 540 ¾ 660 ns In : Pin18,Out : Pin5 Rec. AFC pull-in range "H"level fAFH Pulse 5 VPP,fH + 1.22 kHz 1.2 ¾¾ kHz In : Pin18,14,Out : Pin5 Rec. AFC pull-in range "L"level fAFL Pulse 5 VPP,fH - 1.22 kHz ¾¾ - 1.2 kHz In : Pin18,14,Out : Pin5 In : Pin82,14,Out : Pin5 Rec. APC pull-in range "H"level fAPH Sin 300 mVPP,fSC + 500 Hz 500 ¾¾ Hz In : Pin18,14,Out : Pin79 Rec. APC pull-in range "L"level fAPL Sin 300 mVPP,fSC - 500 Hz ¾¾ - 500 Hz In : Pin18,14,Out : Pin79 Rec. chrominance output variable VRC1 Video signal 1 VPP 2.0 4.7 7.0 dB range max. In : Pin18,Out : Pin41 Rec. chrominance output variable VRC2 Video signal 1 VPP -7.0 -4.2 -2.0 dB range min. In : Pin18,Out : Pin41 VCO frequency f VCO Sin 300 mVPP,fSC = 3.579545 MHz 469 629 789 kHz (40 fH equivalent) Pin78 = 2.0 V In : Pin82,Out : Pin5 Rec. comb depth G RECC Sin 250 mVPP,SLP ¾¾ - 27 dB In : Pin6,Out : Pin33 Rec. comb 40 fH shift DtRECC Sin 250 mVPP,SLP -10 ¾ 10 ns In : Pin6,Out : Pin33 Main BM carrier-leak C LBM Sin 100 mVPP,629 kHz ¾¾ - 38 dB In : Pin34,14,Out : Pin3 Burst-down gain 1 G BD1 Sin 100 mVPP,fSC ,SP-mode -5.1 -4.1 -3.1 dB In : Pin34,14,Out : Pin3

n Electrical Characteristics(continued) Ta = 25 °C –2 °C Parameter Symbol Conditions min. typ. max. Unit Burst-down gain 2 G BD2 Sin 100 mVPP,fSC ,LP-mode 0 ¾ 2d B In : Pin34,14,Out : Pin3 PB chrominance output amplitude VPBC Sin 100 mVPP,629 kHz 365 450 535 mV PP In : Pin34,14,Out : Pin3 PB ACC control characteristic SACC Sin 140/8.9 mVPP,629 kHz -3 ¾¾ dB In : Pin34,14,Out : Pin12 PB killer on sensitivity S PKON Sin 0.89 mVPP,629 kHz ¾¾ - 43 dB In : Pin34,14,Out : Pin3 PB killer off sensitivity S PKOFF Sin 2.81 mVPP,629 kHz -28 ¾¾ dB In : Pin34,14,Out : Pin3 PB chrominance undesired DG PB Sin 35 mVPP,629 kHz ¾¾ - 33 dB ingredient In : Pin34,14,Out : Pin3 XO free-run frequency f XO Out : Pin79 -50 ¾ 50 Hz 2fSC output amplitude V fSC Out : Pin79 290 435 580 mV PP Chrominance mix. gain G MIX Sin 5 mVPP,fSC ,SP-mode 4.8 ¾ 8.8 dB In : Pin6,Out : Pin25 CNR output gain G CNR Sin 200 mVPP,fSC -2.5 ¾ 3.5 dB In : Pin6,Out : Pin5 CNR limitter gain G LIM Sin 5 mVPP,fSC 4.5 ¾ 10.5 dB In : Pin1,Out : Pin3 CNR K-value gain G CNRK Sin 5 mVPP,fSC 0.60 0.73 0.85 dB In : Pin6,Out : Pin3 CCD comb LPF frequency DG CDL Sin 200 mVPP,7.16 MHz/630 kHz ¾¾ - 27 dB characteristic In : Pin10,Out : Pin5 CCD AGC control sensitivity GPBCCD Sin 200 mVPP,629 kHz,SP -1 ¾ 1d B In : Pin6,Out : Pin5 PB comb depth G PBC Sin 200 mVPP,40 fH-1/2 fH ¾¾ - 27 dB In : Pin6,Out : Pin5 PB comb 40 fH shift DtPBC Sin 200 mVPP,40 fH-1/2 fH -10 ¾ 10 ns In : Pin6,Out : Pin5 Rec. RF EQ frequency DG REQ1 Sin 40 mVPP,2.05 MHz/4 MHz 1.1 ¾ 4.1 dB characteristic 1 In : Pin34,Out : Pin41 Rec. RF EQ frequency DG REQ2 Sin 40 mVPP,5 MHz/8 MHz 1.4 ¾ 4.9 dB characteristic 2 In : Pin34,Out : Pin41 Auto tracking output DC voltage VATO C-GND(Pin41) ¾¾ 0.7 V without signal Out : Pin40 Auto tracking I/O characteristic 1 VAT1 Sin 80 mVPP,4 MHz,SP-mode 1.3 ¾ 1.8 V In : Pin41,Out : Pin40

n Electrical Characteristics(continued) Ta = 25 °C –2 °C Parameter Symbol Conditions min. typ. max. Unit Auto tracking I/O characteristic 2 VAT2 Sin 200 mVPP,4 MHz,SP-mode 2.25 ¾ 2.75 V In : Pin41,Out : Pin40 Auto tracking I/O characteristic 3 VAT3 Sin 1 VPP,4 MHz,SP-mode 3.6 ¾¾ V In : Pin41,Out : Pin40 Auto tracking I/O characteristic 4 VAT4 Sin 200 mVPP,4 MHz,SLP-mode 2.85 ¾ 3.35 V In : Pin41,Out : Pin40 PB RF AGC output amplitude V PRFA Sin 200 mVPP,4 MHz 110 ¾ 250 mV PP In : Pin41,Out : Pin44 PB RF AGC control sensitivity SPRFA Sin 650/160 mVPP,4 MHz -3 ¾ 3d B In : Pin41,Out : Pin44 PB RF EQ output amplitude V PEQ Sin 200 mVPP,4 MHz 320 ¾ 580 mV PP In : Pin41,Out : Pin33 PB RF EQ frequency DG PEQ1 Sin 60 mVPP,630 kHz/4.9 MHz ¾¾ - 15 dB characteristic 1 In : Pin41,Out : Pin33 PB RF EQ frequency DG PEQ2 Sin 60 mVPP,1 MHz/4.9 MHz -14.5 ¾- 9.5 dB characteristic 2 In : Pin41,Out : Pin33 PB RF EQ frequency DG PEQ3 Sin 60 mVPP,8 MHz/4.9 MHz ¾¾ - 23 dB characteristic 3 In : Pin41,Out : Pin33 Line output gain G LO Sin -29 dBV,1 kHz 19.8 21.0 22.2 dB In : Pin73,Out : Pin69 Rec. output gain 1 DG RO1 Sin -29 dBV,1 kHz,SP-mode 4.9 5.9 6.9 dB In : Pin71,Out : Pin65 Rec. output gain 2 DG RO2 Sin -29 dBV,1 kHz,SLP-mode 0.2 0.7 1.2 dB In : Pin71,Out : Pin65 Rec. output harmonic distortion DRO Sin -29 dBV,1 kHz,SLP-mode ¾¾ 0.95 % In : Pin71,Out : Pin65 Rec. output S/N uRO SLP-mode ¾- 68 -62 dB Out : Pin65 AGC control sensitivity S AGC Sin -9 dBV,1 kHz -1.0 1.0 3.0 dB In : Pin73,Out : Pin69 Line output harmonic distortion DLO Sin -29 dBV,1 kHz ¾¾ 0.6 % In : Pin73,Out : Pin69 fH trap1 frequency characteristicDG FT1 Sin -29 dBV,12 kHz -2.5 0 2.5 dB In : Pin73,Out : Pin69 fH trap2 frequency characteristicDG FT2 Sin -29 dBV,15.75 kHz ¾¾- 2d B In : Pin73,Out : Pin69 Mute/Line DC offset DV ML Out : Pin69 -65 ¾ 65 mV Mute/Tuner DC offset DV MT Out : Pin69 -65 ¾ 65 mV Mute/PB-line DC offset DV MP Out : Pin69 -40 ¾ 60 mV

n Electrical Characteristics(continued) Ta = 25 °C –2 °C Parameter Symbol Conditions min. typ. max. Unit Mute gain attenuation DG M Sin -68.3 dBV,1 kHz ¾¾ - 80 dB In : Pin60,Out : Pin69 Rec. output max. level uRMAX Sin -70.8 dBV,1 kHz - 0.5 ¾¾ dBV In : Pin73,Out : Pin65 Non-rec. on SW output drive currentINREC In : I2C bus,Out : Pin56 500 ¾¾ m A PB line output gain G PLO Sin -68.3 dBV,1 kHz,SP-mode 59.5 60.0 60.5 dB In : Pin60,Out : Pin69 PB line output differential signalDG PLO Sin -70.8 dBV,1 kHz,SLP-mode 2.6 3.1 3.6 dB gain In : Pin60,Out : Pin69 PB line output harmonic D PO Sin -70.8 dBV,1 kHz,SLP-mode ¾ 0.50 0.95 % distortion In : Pin60,Out : Pin69 PB line output S/N 1 V PSN1 Pin60 = 1.5 kW ,(R-GND),SLP-mode ¾¾ 3.5 mV rms Out : Pin69 PB line output S/N 2 V PSN2 Pin60 = 1.5 kW ,(R-GND),SP-mode ¾¾ 1.8 mV rms Out : Pin69 PB line output max. level uLMAX Sin -70.8 dBV 1 kHz -1.5 ¾¾ dBV In : Pin60,Out : Pin69

• Design reference data Note) The characteristic values below are theoretical values for designing and not guaranteed. Parameter Symbol Conditions min. typ. max. Unit Before start bus free time t BUF V CC = 5 V 4.0 ¾¾ m s Start condition set-up time tSU-STA V CC = 5 V 4.0 ¾¾ m s Start condition hold time tHD-STA V CC = 5 V 4.0 ¾¾ m s SCL clock "L"period t LOW V CC = 5 V 4.0 ¾¾ m s SCL clock "H"period t HIGH V CC = 5 V 4.0 ¾¾ m s SCL,SDA signals rise time t RISE V CC = 5 V ¾¾ 1.0 ms SCL,SDA signals fall time t FALL V CC = 5 V ¾¾ 0.35 ms Data set-up time(White) t SU-DATA V CC = 5 V 0.25 ¾¾ m s Data hold time(White) t HD-DATA V CC = 5 V 0 ¾¾ m s Acknowledge set-up time t SU-ACK V CC = 5 V ¾¾ 3.5 ms Acknowledge hold time t HD-ACK V CC = 5 V 0 ¾¾ m s Stop condition set-up time tSU-STO V CC = 5 V 4.0 ¾¾ m s

n Application Circuit Example V CC (NA) AudioTuner in Audio line in GND(VCO) Audio Mute REC-C adj. 2 fSC out SW ONfSC out REC-Y adj. GND(C) Audio out 1/2 VCC V CC (C) Art V IN HSS OUT LINE1 Tuner V CC (Y) V REG Video out GND(Y) VV : PB-C IN AT-OUT RF in/out GND(RF) Rec.-C out or EXTERNAL REC RF or MAIN EMPH OUT or TEST2 PB-C out Monitor out TEST5/ TEST6 PAL-M:"L" or TEST1 SCL IN SDA IN V CC (RF) ROTARY IN MLPF A/B PB EQ INT/EXT VHS-H REC EQ peak f variable REC EQ LPF fC variable GND (NA) CCD delay CCD 1 kW SW on ANTI Macrovision 0.1 mF 0.22 mF 0.22 mF 6 mF 0.1 mF 6.8 kW 220 W 4 700 W 2 200 W 0.01 mF0.1 mF 1 mF 22 mF 0.01 mF 1 mF 0.01 mF 10 mF 22 mF 2 700 pF 330 kW 10 kW 33 kW 22 kW 820 W 1 000 pF 33 mH 500 W 0.1 mF 1 500 W 2 700 W 180 pF 150 W 30 pF 120 W 0.1 mF 10 mF 180 pF Peaking Rec. EQ peak G variable S-EQ 0.033 mF 15 mH 1 mF 1 mF 2.2 mF 2.2 mF 0.01 mF 0.01 mF 0.1 mF CCD 0.47 mF 10 kW 3 900 pF 1 200 W 47 mF 680 W 2.2 MW

3.58 MHz

0.1 mF 0.1 mF 22 mF 1.2 MW 2.2 mF 2.2 mF 10 mF470 kW 8 200 pF 0.01 mF 47 mF 0.01 mF 0.1 mF 0.1 mF 4.7 mF

1. The latch-up level of pin 8 is low about 140 V(200 pF). Please be careful when handling the pin. 2. Pay attention well to the handling because upside-down mounting may result in over-current, and characteristics deterioration or damage. n Technical Information

• I2C-bus 1.Provided with Auto-increment function
• Sub address 0* : Auto-increment mode (Sending data sequentially, sub address changes sequentially and data are input.)
• Sub address 8* : Data update mode (Sending data sequentially, data are input keeping the same sub address.) 2.I2C-bus protocol
• Slave address : 11100100(E4H)
• Format(normal) Slave address Start condition Start condition Stop conditionAcknowledge bit S0 A P Sub addressA A Data byte

0 ASub addressA A Data 1 AData 2 APData n

Acknowledge bit Acknowledge bit Stop condition Slave addressS Write Acknowledge bit Acknowledge bit Write

• Auto-increment mode/Data update mode

Address D7 D6 D5 D4 D3 D2 D1 D0 Y/C1 Y/C2 Y/C3 Y/C4 Y/C5 Y/C6 NA1 NA2

00 PB comb

(80 H) On/Off 0 : VV 0 : ¾ 0 : Rec. 0 : On 0 : Tuner 0 : Line1 0 : EE 0 : ND-rec. 1 : EE 1 : Trick 1 : PB 1 : Off 1 : Line 1 : Line2 1 : VV 1 : D-rec. NA3 Rec.-comb Edit C-mix. Rec.-RFEQ PB-RFEQ 01 0 : SP =off 0 : Nor Int./Ext. Peaking (80 H) 0 : Tuner 0 : SP 0 : ¾ LP/SLP =on 0 : Edit=off 1 : Combina- 0: Int. 0 : Int. 1 : Line 1 : LP 1 : SLP 1 : Off 1 : Edit =on tion mode 1 : Ext. 1 : Ext. IIL-RSET Color Color DOC Test1 Test2(Pin33)

02 Killer1 Killer2 Nor/On Pin6

(80 H) 0 : Reset 0 : Auto 0 : ¾ 0 : Nor 0 : Nor 000 : White clip 011 : RECCL 1 : Nor 1 : Forced Off 1 : Forced On1 : On 1 : Test H1 010 : MOLO 100 : MONI6 Test3 Test4 Test5(Pin5) Test6(Pin5) 03 AGC/THRO Rec.-RFEQ 000 : MONI1 100 : MONI5 000 : 1/4 VCO 100 : PALFF2 (80 H) 001 : MONI2 101 : MONIY 001 : BLK 101 : CO180 0 : AGC 0 : Nor 010 : MONI3 110 : IILTEST 010 : ROTCC 110 : FHT 1 : THRO 1 : Test4 011 : MONI4 011 : NN33B 111 : BGP Y/C7 PB-RF-EQ

04 ANR CTL 0 : PB-RF-EQ (Peak f

(80 H) 000 : ANR =off Composite (Peak gain control) control) 1 : Component Test7

05 Picture CTL 0 : Nor PB-RF-EQ

(80 H) 000 : Pict =off 1 : DEV- (Peak Q control) stop n Technical Information(continued)

• I2C-bus(continued) 3.Sub address byte and byte format : (80H) : Initial state Note) *1: There is no I2C-bus control on Rec.-Y/C level. *2: Refer to the following for other modes. Pin No. Function Precaution L M H Note 1 C-mix.-in&VCO-ext.-in ¾ Nor CNR-off Clock conditions : 1.25 – 0.5, Pin81 = Low

6 System ¾ PAL-M NTSC Common to Test1

Pull-down with R (With no external components)

n Technical Information(continued)

• I2C-bus(continued) 3.Sub address byte and byte format : (80H) : Initial state Pin No. Function Precaution L M H Note 29 * ¾¾ Anti-macrovision function selection 36 Rec. EQ peak-G ¾ Rec. EQ peak-G * Anti-macrovision variable variable function selectable 52 Rec. EQ peak-F ¾ Rec. EQ peak-F variable ¾ variable 53 Rec. EQ LPF f C ¾ Rec. EQ LPF fC Pin5 : CNR Monitor out fixed at variable variable Pin33 : W/C V=5.0 V 75 NA-mute ¾ Nor Mute Vth = 2.0 V 79 f SC /2 fSC ¾ 2 fSC fSC R = 1 kW (With no external) Pull-up with R components) Note) * : Anti-macrovision Specifications. Pin29fi Pull-up NA non D-rec. Pin36fi "H"(4.5 V min.ð Yes Yes Yes No No No Compatible with macrovision signal (compressed Signal) Anti-macrovision (not compressed Signal)

Function Description Appendx ANR control Sub address : 04 PB-RFEQ Sub address : 04 Peak gain control picture control Sub address : 05 n Technical Information(continued)

• I2C-bus(continued) 4.Bus control D7 D6 D5 00 0 10 0 10 1 11 0 11 1 0 01 01 0 01 1 Off(Edit) Shallowest Shallower Shallow Typical Deep Deeper Deepest D3 D2 D1 00 0 10 0 10 1 11 0 11 1 00 1 01 0 01 1 0(Typical) D7 D6 D5 00 0 10 0 10 1 11 0 11 1 00 1 01 0 01 1 Off(Edit) Softest Softer Soft Typical Sharp Sharper Sharpest

Function Description Appendx PB-RFEQ Sub address : 05 Peak Q control PB-RFEQ Sub address : 04 Sub address : 05 Peak f control n Technical Information(continued)

• I2C-bus(continued) 4.Bus control(continued) D3 D2 D1 00 0 10 0 10 1 11 0 11 1 00 1 01 0 01 1 0(Typical) Sub AD : 04 Sub AD : 05 0(Typical)