AMRX-1510 AVAGO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
Features
- Ultra-slim package
- Less than 2 mm height profile
- Typical 18.5 mm diameter
- Integrated with four directional switches and a center push button
- Integrated with scroll wheel for scrolling operation
- Built-in illumination ring
- Two-Channel Quadrature Output
- 45 Cycles Per Revolution (CPR)
- 1.8V / 3.3V TTL/CMOS Logic Compatible Single-ended Output
- Single 2.4V to 3.3V supply
- Simple Power Down feature
- Easy assembly, no signal adjustment required
- Connectivity through 15-way 0.5 mm pitch FPC
- Customizable aesthetic design
- RoHS compliant WARNING: These devices are Electrostatic Discharge (ESD) sensitive. The following precautions are strongly recom - mended. Ensure that an ESD approved carrier is used when units are transported from one destination to another. Personal grounding is to be worn at all times when handling these devices. Failure to observe proper ESD handling pre - cautions will void all warranties. Refer to Avago Application Note A004R: Electrostatic Discharge Damage and Control.
Device Selection Guide 1, 2 Part Number Resolution (CPR) Operating Temperature (°C) Output Communication Exterior Options DC Supply Voltage (V) AMRX-1510-1BWA 45 -5 to +85 1.8V CH A & B Dial: VM Chrome Finish; Push Button: Matt Black; LED : White; Connectivity: FPC 15-way 0.5 mm pitch +.4 to +3.3 AMRX-1510-1AWB 45 -15 to +70 1.8V CH A & B Dial: Black SF Rubber; Push Button: High Gloss Black; LED : White; Connectivity: FPC 15-way 0.5 mm pitch +.4 to +3.3 AMRX-1510-1AWC 45 -5 to +85 1.8V CH A & B Dial: High Gloss Black; Push Button: High Gloss Black; LED : White; Connectivity: FPC 15-way 0.5 mm pitch +.4 to +3.3 AMRX-1510-1BBA 45 -5 to +85 1.8V CH A & B Dial: VM Chrome Finish; Push Button: Matt Black; LED : Blue; Connectivity: FPC 15-way 0.5 mm pitch +.4 to +3.3 AMRX-1510-1ABB 45 -15 to +70 1.8V CH A & B Dial: Black SF Rubber; Push Button: High Gloss Black; LED : Blue; Connectivity: FPC 15-way 0.5 mm pitch +.4 to +3.3 AMRX-1510-1ABC 45 -5 to +85 1.8V CH A & B Dial: High Gloss Black; Push Button: High Gloss Black; LED : Blue; Connectivity: FPC 15-way 0.5 mm pitch +.4 to +3.3 AMRX-1510-BWA 45 -5 to +85 3.3 V CH A & B Dial: VM Chrome Finish; Push Button: Matt Black; LED : White Connectivity: FPC 15-way 0.5 mm pitch +.4 to +3.3 AMRX-1510-AWB 45 -15 to +70 3.3 V CH A & B Dial: Black SF Rubber; Push Button: High Gloss Black; LED : White; Connectivity: FPC 15-way 0.5 mm pitch +.4 to +3.3 AMRX-1510-AWC 45 -5 to +85 3.3 V CH A & B Dial: High Gloss Black; Push Button: High Gloss Black; LED : White; Connectivity: FPC 15-way 0.5 mm pitch +.4 to +3.3 AMRX-1510-BBA 45 -5 to +85 3.3 V CH A & B Dial: VM Chrome Finish; Push Button: Matt Black; LED : Blue; Connectivity: FPC 15-way 0.5 mm pitch +.4 to +3.3 AMRX-1510-ABB 45 -15 to +70 3.3 V CH A & B Dial: Black SF Rubber; Push Button: High Gloss Black; LED : Blue; Connectivity: FPC 15-way 0.5 mm pitch +.4 to +3.3 AMRX-1510-ABC 45 -5 to +85 3.3 V CH A & B Dial: High Gloss Black; Push Button: High Gloss Black; LED : Blue; Connectivity: FPC 15-way 0.5 mm pitch +.4 to +3.3 Notes: 1. For different product options, customized products and technical documents, please contact factory at mido.trsc@avagotech.com 2. FPC connection is compatible with bottom contact type FPC ZIF connector: 3. Recommended ZIF connector : MOLEX 52893-1595 (2mm height), KYOCERA 6239-015 (1.5mm height), 6238-015 (1.1mm height) & etc 4. The ESD rating is subjected to the dial finishing option (refer to Table 2).
Table 1. Absolute Maximum Ratings [1, 2]
- Stresses greater than those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is stress rating only, and
- Exposure to absolute maximum rating conditions for extended periods may affect reliability.
- Operating temperature range is subjected to customized finishing or coating.
Table 2. ESD Ratings [1] Table 3. Recommended Operating Condition
- Except for Black SF Rubber coating options.
- LED forward voltage, VF=2.8V typical.
- Set PDN input pin to logic HIGH for normal operation and logic LOW to power down the device.
- Typical value is referred to mechanically permissible speed, while maximum value is referred to electrically permissible speed.
Table 4. Electrical Characteristics
- Without illumination LED.
- Refer to I/O Voltage Option 1 (on page 7).
- Refer to I/O Voltage Option 2 (on page 7).
Table 5. Mechanical Characteristics Table 6. Encoding Characteristics
- R1 is the current-limiting resistor for LEDs.
Figure 1. Functional Block Diagram
1 VLED LED Anode
PDN Power Down Control. LOW: Activate Power Down
3 S1 Connect to Switch 1 (S1)
4 S Connect to Switch (S)
5 S5 Connect to Switch 5 (S5)
6 GND_SW Common Ground for S1,S,S3,S4,S5
7 S4 Connect to Switch 4 (S4)
8 S3 Connect to Switch 3 (S3)
9 GND Supply Ground
10 VCC Supply Voltage
11 CH A Channel A
1 CH B Channel B
13 NC Not Connected
14 NC Not Connected
15 NC Not Connected
Ordering Information
A M R X - 1 5 1 0 - 1 B W A Form Factor: 1 - 18.5mm Diameter, 1.9mm Height Dome Switches: 5 - Four directional switches, one center switch. Mounting +Connectivity Option: 0 - Direct Solder, 1mm pitch 1 - FPC 15-way 0.5 mm pitch, 25 mm length Scroll Resolution: 0 - 45 Cycles Per Revolution (CPR) I/O Voltage: 1 - 1.8V 2 - 3.3V Center Button: A - High Gloss Black colored B - Black colored (Matt) Illumination Color / LED Color: W - White B - Blue Dial Color/Finishing: A - VM Chrome Finish (Matt) B - Black SF Rubber C - High Gloss Black For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries. Data subject to change. Copyright © 007 Avago Technologies Limited. All rights reserved. AV0-0417EN - August 3, 007