5484GADCAMPAXMS EVERLIGHT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Everlight Electronics Co., Ltd. http\\\\:www. everlight.com Rev 2 Page: 1 of 6 Device Number : DLE-548-025 Prepared date: 10-19-2007 Prepared by: Grace Shen F e a t u r e s ․High luminous intensity output ․Oval Shape ․Well defined spatial radiation ․Wide viewing angle (2θ1/2) : 110o / 40o ․UV resistant epoxy ․The product itself will remain within RoHS compliant version Descriptions ․This precision optical performance oval LED is specifically designed for passenger information signs ․This lamp has matched radiation patterns with red and blue mixing color applications
Applications
․Color graphic signs ․Message boards ․Variable message signs (VMS) ․Commercial outdoor advertising Device Selection Guide LED Part No. Chip Material Emitted Color Lens Color Stopper 5484/GADC-AMPA/MS No 5484/GADC-AMPA/P/MS InGaN Brilliant Green Green Diffused Yes
Everlight Electronics Co., Ltd. http\\\\:www. everlight.com Rev 2 Page: 2 of 6 Device Number : DLE-548-025 Prepared date: 10-19-2007 Prepared by: Grace Shen Package Dimensions Stopper Type No Stopper Type Notes: ․All dimensions are in millimeters, tolerance is 0.25mm except being specified. ․Protruded resin under flange is 1.5mm Max LED. ․Bare copper alloy is exposed at tie-bar portion after cutting.
Everlight Electronics Co., Ltd. http\\\\:www. everlight.com Rev 2 Page: 3 of 6 Device Number : DLE-548-025 Prepared date: 10-19-2007 Prepared by: Grace Shen Absolute Maximum Rating (Ta=25℃) Parameter Symbol Absolute Maximum Rating Unit Forward Current I F 30 mA Pulse Forward Current (Duty1/10@ 1KHz) I FP 100 mA Operating Temperature T opr -40 ~ +85 ℃ Storage Temperature T stg -40 ~ +100 ℃ Soldering Temperature T sol 260 ±5 ℃ Power Dissipation P d 100 mW Reverse Voltage V R 5 V Notes: Soldering time≦5 seconds. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity I V 1800 2250 3600 mcd Viewing Angle 2θ1/2 -- X:110 Y:40 -- deg Peak Wavelength λp -- 518 -- Dominant Wavelength λd 525 530 535 Spectrum Half width Δλ -- 35 -- nm Forward Voltage V F 2.8 3.4 3.6 V IF=20mA Reverse Current I R -- -- 50 μA VR=5V Rank Combination (IF= 2 0 m A ) Rank M N P Luminous Intensity 1800~2250 2250~2850 2850~3600 *Measurement Uncertainty of Luminous Intensity: ±15% Unit:mcd Rank 0 1 2 3 *Measurement Uncertainty of Forward Voltage: ±0.1V Unit:V Rank 1 2 Dominant Wavelength 525~530 530~535 *Measurement Uncertainty of Dominant Wavelength ±1.0nm Unit:nm *The quantity ratio of the ranks is decided by EVERLIGHT.
Everlight Electronics Co., Ltd. http\\\\:www. everlight.com Rev 2 Page: 4 of 6 Device Number : DLE-548-025 Prepared date: 10-19-2007 Prepared by: Grace Shen Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd. http\\\\:www. everlight.com Rev 2 Page: 5 of 6 Device Number : DLE-548-025 Prepared date: 10-19-2007 Prepared by: Grace Shen Packing Quantity Specification 1.500PCS/1Bag，5Bags/1Box 2.10Boxes/1Carton Label Form Specification CPN: Customer’s Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks of Luminous Intensity and Forward Voltage HUE: Rank of Dominant Wavelength REF: Reference LOT No: Lot Number MADE IN TAIWAN: Production Place CPN: P/N: EVERLIGHT 5484/GADC-AMPA/X/MS QTY： MADE IN TAIWAN CAT: HUE: REF: LOT NO： RoHS
Everlight Electronics Co., Ltd. http\\\\:www. everlight.com Rev 2 Page: 6 of 6 Device Number : DLE-548-025 Prepared date: 10-19-2007 Prepared by: Grace Shen Notes 1. Above specification may be change d without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLI GHT assumes no responsibility for any damage resulting from use of the product which does not comp ly with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials prot ected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. 4. Soldering Condition Careful attention should be paid during solderi ng. When soldering, leave more then 3mm from solder joint to case, and soldering beyond the base of the tie bar is recommended. Avoiding applying any stress to the lead fr ame while the LEDs are at high temperature particularly when soldering. Recommended soldering conditions: Hand Soldering DIP Soldering Temp. at tip of iron 400 Max.℃ (30W Max.) Preheat temp. 100 Max.℃ (60 sec Max.) Soldering time 3 sec Max. Bath temp. 265 Max. Distance 3mm Min.(From solder joint to case) Bath time. 5 sec Max. Distance 3mm Min. EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936 Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306 Tucheng, Taipei 236, Taiw an, R.O.C http:\\\\www.everlight.com