AMM120PS12 XPPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

120 Watts

  • Energy Star Level V≥ 24 V
  • CEC 2008 & EISA 2007 Compliant
  • Worldwide Medical Approvals
  • Small Size/High Power Density
  • Class I and Class II Versions
  • Operating Temperature up to +60 °C
  • Locking Output Connector AMM120 Series Input Input Voltage • 90-264 VAC Input Frequency • 47-63 Hz Input Current • 1.6 A rms at 115 VAC,

0.8 A rms at 230 VAC

Inrush Current • 60 A at 115 VAC, 120 A at 230 VAC, cold start +25 °C Power Factor • 0.98 typical Earth Leakage Current• 90 µA max at 115 VAC/60 Hz, (Class I Versions) 150 µA max at 230 VAC/50 Hz Input Protection • Internal 3 A fuse in live and neutral lines Output Output Voltage • 12 to 48 VDC Output Voltage Trim • Not user-adjustable Initial Set Accuracy • ±2 % Minimum Load • No minimum load required Start Up Delay • 2 s max at 115 VAC Start Up Rise Time • <80 ms at 115 VAC Hold Up Time • 15 ms minimum at full load & 115 VAC Line Regulation • 0.5% maximum Load Regulation • Total regulation <±5% Transient Response • 4% max. deviation, recovery to within 1% in 500 µs for a 25% load change Ripple & Noise • 2% max pk-pk (see note 1) Overvoltage Protection• 110-140% Vnom, recycle input to reset Overtemperature • Unit shuts down, recycle input to reset Protection Overload Protection • 110-150%, auto recovery Short Circuit Protection• Trip and restart (Hiccup mode) Temperature • 0.04%/°C Coefficient xppower.com General Efficiency • 85% typical Isolation • 4000 VAC Input to Output

1500 VAC Input to Ground (Class I only)

500 VAC Output to Ground (Class I only)

Switching Frequency • 40-120 kHz variable Power Density • 3.7 W/In3 MTBF • >175 kHrs per MIL-HDBK-217F Environmental Operating Temperature• 0 °C to +60 °C, derate from 100% power at +40 °C to 50% power at +60 °C Cooling • Convection-cooled Operating Humidity • 10-95% RH, non-condensing Storage Temperature • -20 °C to +80 °C Operating Altitude • 3000 m Shock • 30 g, 10 ms on 3 axes Vibration • 5-100 Hz, 2.31 m/s2, 20 mins, 3 axes EMC & Safety Emissions • EN55011/FCC/VCCI, Class B conducted EN55011/FCC/VCCI, Class B radiated Harmonic Currents • EN61000-3-2 Voltage Flicker • EN61000-3-3 ESD Immunity • EN61000-4-2, level 3 Perf Criteria A Radiated Immunity • EN61000-4-3, level 2 Perf Criteria A EFT/Burst • EN61000-4-4, level 3 Perf Criteria A Surge • EN61000-4-5, level 3 Perf Criteria A Conducted Immunity • EN61000-4-6, 3 V Perf Criteria A Magnetic Field • EN61000-4-8, 3 A/m Perf Criteria A Dips & Interruptions • EN61000-4-11, 70% UT for 10 ms, 40% U T for 100 ms, <5% UT for 5000 ms Perf Criteria A, B, B (Perf Criteria A, A, B with 70% load) Safety Approvals • EN60601-1, UL60601-1, CSA22.2 No. 601-1 per cUL, CE Mark

Regulation(2) Model Number (3, 4) 96 W 12 V 8.00 A 5% AMM120PS12 105 W 15 V 7.00 A 5% AMM120PS15 120 W 18 V 6.67 A 5% AMM120PS18 120 W 19 V 6.32 A 5% AMM120PS19 120 W 20 V 6.00 A 5% AMM120PS20 120 W 24 V 5.00 A 5% AMM120PS24 120 W 30 V 4.00 A 5% AMM120PS30 120 W 36 V 3.34 A 5% AMM120PS36 120 W 48 V 2.50 A 5% AMM120PS48 Notes 1. Ripple and noise measured at 20 MHz bandwidth with a 10 µF tantalum and 0.1 µF ceramic cap connected at the measurement point. 2. Total regulation includes initial set accuracy, line and load regulation. 3. For class II versions, add ‘-C2’ to model number e.g. AMM120PS24-C2. 4. For optional barrel jack connector add suffix ‘B1’ to model number e.g. AMM120PS24C2B1. 3.00 (76.2) 6.30 (160.0) Cable length approx 48” (1220mm) Power On Indicator 1.72 (43.7) Rubber foot (4 places.) AC Input 0.02 (0.5) 1 3 IEC 320-C14 Inlet - For Class I version IEC 320-C18 Inlet - For Class II version 2. Maximum load per pin on output connector is 5 A. 3. Output connector is KYCON KPP-4P locking type. For mating half, use KYCON KPJ-4S-S or equivalent. 4. For Class I versions shell is connected to ground. For Class II versions shell is capacitively coupled to input. 5. Weight 1.72 lbs (780 g). Pin Function

1 Return

2 Output+

3 Return

4 Output+

Optional Barrel Jack Connector 0.433 (11.0) 0.083 (2.1) 0.413 (10.5) 0.217 (5.5) Notes