AML120 XPPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
120 Watts
- Energy Star Level V≥18 V
- CEC 2008 & EISA 2007 Compliant≥15V
- High Power Density
- Single Outputs from 15 V to 48 V
- High Efficiency
- 0 °C to +70 °C Operating Temperature
- Non-standard Connectors Available AML120 Series Input Input Voltage • 90-264 VAC Input Frequency • 47-63 Hz Input Current • 1.6 A rms at 115 VAC,
0.8 A rms at 230 VAC
Inrush Current • 60 A at 115 VAC, 120 A at 230 VAC, cold start +25 °C Power Factor • 0.98 typical at 115 VAC Earth Leakage Current• 150 µA max at 115 VAC, 60 Hz 250 µA max at 230 VAC, 50 Hz Input Protection • Internal 3 A fuse Standby Power • <0.5 W Consumption Output Output Voltage • 15 to 48 VDC Output Voltage Trim • Not user-adjustable Initial Set Accuracy• ±2% Minimum Load • No minimum load required Start Up Delay • 2 s max at 115 VAC Start Up Rise Time • <80 ms at 115 VAC Hold Up Time • 15 ms minimum at full load and 115 VAC Line Regulation • ±0.5% maximum Load Regulation • See table Transient Response • 4% max. deviation, recovery to within 1% in 500 µs for a 25% load change Ripple & Noise • 2% max pk-pk (see note 1) Overvoltage Protection• 110-140% Vnom, recycle input to reset Overtemperature • Unit shuts down, recycle input to reset Protection Overload Protection • 110-150%, auto recovery Short Circuit Protection• Trip and restart (Hiccup mode) Temperature • 0.04%/°C Coefficient xppower.com General Efficiency • 87% typical, 80% min for 15 V models Isolation • 3000 VAC Input to Output
1500 VAC Input to Ground
Output 0 V is electrically connected to Input Ground Switching Frequency • 20-110 kHz variable Power Density • 4.9 W/In3 MTBF • >100 kHrs per MIL-HDBK-217F Environmental Operating Temperature• 0 °C to +70 °C, derate from 100% power at +50 °C to 60% power at +70 °C Cooling • Convection-cooled Operating Humidity • 10-95% RH, non-condensing Storage Temperature • -20 °C to +80 °C Operating Altitude • 3000 m Shock • 30 g, 10 ms on 3 axes Vibration • 5-100 Hz, 2.31 m/s2, 20 mins, 3 axes EMC & Safety Emissions • EN55022/FCC/VCCI, Class B conducted EN55022/FCC/VCCI, Class B radiated Harmonic Currents • EN61000-3-2 Voltage Flicker • EN61000-3-3 ESD Immunity • EN61000-4-2, level 3 Perf Criteria A Radiated Immunity • EN61000-4-3, level 3 Perf Criteria A EFT/Burst • EN61000-4-4, level 2 Perf Criteria A Surge • EN61000-4-5, level 3 Perf Criteria A Conducted Immunity • EN61000-4-6, 10 V Perf Criteria A Dips & Interruptions• EN61000-4-11, 30% for 10 ms, 60% 100 ms, 100% 5000 ms, Perf Criteria A, B, B Safety Approvals • EN60950, UL60950, CSA22.2 No. 60950 per cUL, CE Mark
2.56 (65.0) 6.58 (167.0) Cable length approx 71” (1800mm) Power On Indicator 1.46 (37.0) Rubber foot (4 places.) AC Input IEC 320-C6 Inlet (Mates with a C5 plug) 0.02 (0.5) 1 3 AML120 Mechanical Details Models and Ratings Output Power Output Voltage Output Current Total Reguaion(2) Model Number 105 W 15 V 7.00 A 5% AML120PS15 120 W 18 V 6.67 A 5% AML120PS18 120 W 19 V 6.32 A 5% AML120PS19 120 W 20 V 6.00 A 5% AML120PS20 120 W 24 V 5.00 A 5% AML120PS24 120 W 30 V 4.00 A 5% AML120PS30 120 W 36 V 3.34 A 5% AML120PS36 120 W 48 V 2.50 A 5% AML120PS48 Notes 1. Ripple and noise measured at 20 MHz bandwidth with a 10 µF tantalum and 0.1 µF ceramic cap connected at the measurement point. 2. Total regulation includes initial set accuracy, line and load regulation. 2. Maximum load per pin on output connector is 5 A. 3. Optional output connectors available. Consult sales. 4. Output connector is non locking 4 pin DC power plug and mates with Kycon part KPJ-4S or equivalent. Pin Function