DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Features

 5 x 5 mm surface mount package  RF frequency range from 40.5 to 43.5 GHz  LO frequency range from 18.5 to 23.5 GHz  IF frequency range from DC to 3 GHz  +20 dBm LO driver power  10 dB Conversion Gain  20 dB Dynamic Range  +20 dBm Output IP3 @ 40.5 GHz, and +16 dBm @ 43.5 GHz  Vdd = 3.5 V and Idd = 300 mA  1 to 0 V Control voltage (Vc) Application  Microwave Radio Systems Package Diagram Attention: Observe Precautions for handling electrostatic sensitive devices. ESD Machine Model: 30 V ESD Human Body Model: 150 V Refer to Avago Application Note A004R: Electrostatic Discharge Damage and Control. Pin Function

1 IF1

3 IF2

4 RF_OUT

8 RF_IN

Table 1. Absolute Minimum and Maximum Ratings Table 2. Recommended Operating Range Table 3. RF Electrical Characteristics LO = +20 dBm, Upper Side Band (RF = IF + 2*LO) and 50  at all ports, unless otherwise specifi ed. Return Loss measurement includes eff ect of connector + PCB.

CV Gain @ 40.5 Ghz, Mean = 10.79 dB, LSL = 8 dB IIP3 @ 40.5 Ghz, Mean = 8.99 dBm, LSL = 4.5 dBm Product Consistency Distribution Charts at 40.5 GHz, 42 GHz and 43.5 GHz, Vdd = 5 V, VC = -1 V, LO = 21 dBm, IF = -5 dBm (Sample size of 2,000 pieces) CV Gain @ 42 Ghz, Mean = 12.07 d , LSL = 8 dB CV Gain @ 43.5 Ghz, Mean = 9.87 dB, LSL = 8 dB 71 0 1 2 1 4 13 1589 1 1 71 0 1 2 1 4 13 1589 1 1 LSL LSL 45 7 6 9 10 11 12 8 LSL LSL LSL 71 0 1 2 1 4 13 1589 1 1 LSL 45 7 6 9 10 11 12 84 5 7 6 9 10 11 12 8

Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2012 Avago Technologies. All rights reserved. Table 4. Pin Description

2 GND

3 GND

5 Vc -1 to 0 V < 1 mA

7 GND

8 GND

  1. IF can be applied to either IN or Isolation port of a passive Hybrid.
  2. If IF is applied to IN port, terminate Isolation port with 50 ohm
  3. If IF is applied to Isolation port, terminate IN port with 50 ohm
  4. Switching the IF input from In port to Isolation port or vice versa RF

AMxP-xxxx production Assembly Process (Land Pattern B).