AMGP-6432 AVAGO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

Features

  • 5 x 5 mm surface mount package
  • > +33 dBm Output Power from 28.5 to 31 GHz
  • 50 Ω input and output match
  • -40° C to +85° C operation

Applications

  • VSAT
  • Microwave Radio System
  • Satellite Up/Down Link Note: This part is not rated for high-moisture environments. Package Diagram Attention: Observe Precautions for handling electrostatic sensitive devices. ESD Machine Model (Class A): 60 V ESD Human Body Model (Class 1A): 200 V Refer to Avago Application Note A004R: Electrostatic Discharge Damage and Control. Pin Function 1 Vg

2 Vd1

3 Vd2

4 RF_OUT

5 Vd2

6 Vd1

8 RF_IN

RF_IN RF_OUT Vg Vd1 Vd2 Vd2Vd1Vg

Table 1. Absolute Minimum and Maximum [1] Ratings

  1. Operation of this device above any one of these maximum parameters may cause permanent damage
  2. With the DC (typical bias) and RF applied to the device at board temperature Tb= 25° C

Table 2. Recommended Operating Range

(Idq1 + Idq2), Tc = 25 °C, and 50 Ω at all ports, unless otherwise stated. Table 3. RF Electrical Characteristics

  1. P out and Gain measurement accuracy is subjected to the tolerance of ±0.5 dBm, respectively.

Product Consistency Distribution Charts at 29.25 GHz and 30 GHz, V dd = 6 V, Idq = 0.7 A Pout @ 29.25 GHz (Pin = 17 dBm), Mean = 34.8 dBm, LSL = 33 dBm Gain @ 29.25 GHz, Mean = 21.5 dB, LSL = 18 dB, USL = 25 dB Gain @ 30 GHz, Mean = 21.2 dB, LSL = 18 dB, USL = 25 dB Vg @ Vdd = 6 V, Idq = 0.7 A, Mean = -0.68 V, LSL = -1 V, USL = -0.6 V Pout @ 30 GHz (Pin = 17 dBm), Mean = 34.3 dBm, LSL = 33 dBm USLLSL USLLSL LSL 33 34 35 36 18 19 20 21 22 23 24 25 LSL LSL USL 18 19 20 21 22 23 24 25 LSL USL

this page includes evaluation board loss and connector loss approximately 0.5 dB/one side. Figure 13. S21 (dB) Frequency Sweep Figure 14. S11 (dB) Frequency Sweep Figure 15. S22 (dB) Frequency Sweep Figure 16. P1dB (dBm) Frequency Sweep Figure 17. P3dB (dBm) Frequency Sweep Figure 18. OIP3 and IM3 level vs. Frequency Sweep @ Po = 20 dVm/tone

5 V 840 mA

6 V 700 mA

6.5 V 645 mA

  • Apply Vg [Pin 1 or Pin 7] = -1.5V
  • Apply Vdd [Pin 3 and Pin 5] = 0V
  • Increase Vdd to 6V
  • Increase Vg obtain Idsq = 0.7A
  • Apply RF Input
  • Turn off in reverse order

Table 5. Recommended Passive Components Table 4. Pin Description Table 3. Typical Test Conditions: Figure 19. Application Circuit Figure 20. Demo-board

For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2013 Avago Technologies. All rights reserved. AV02-3203EN - August 27, 2013 Part Number Ordering Information Part Number Devices per Container Container AMGP-6432-BLKG 10 antistatic bag AMGP-6432-TR1G 100 7” Reel AMGP-6432-TR2G 500 7” Reel Package Dimension, PCB Layout and Tape and Reel information Please refer to Avago Technologies Application Note 5521, AMxP-xxxx production Assembly Process (Land Pattern B). Reliability Data Please contact Avago Technical and/or Customer supports for more detail www.avagotech.com