AMG8854M01 PANASONIC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

Features

8 : 8 pixels 8 : 8 pixels 5 5.0 V Item Performance 30-Sep-20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Types

Ordering information

Operating temperature range Temperature range of measuring object Applied voltage 5.0 V ± 0.5 V Part numberOperating voltageNumber of pixel (Vertical 8 × Horizontal 8 Matrix) Infrared array sensor Grid-EYE Narrow angle type

5.0 V AMG8854M01

INT, SDA Item Absolute maximum ratings Terminal Applied voltage −0.3 V to 6.5 V VDD Input voltage −0.3 V to VDD +0.3 V SCL, SDA, AD_SELECT Output sink current −10 mA to 10 mA Static electricity (Human body model) 1 kV All terminals Static electricity (Machine model) 200 V All terminals AMG 8 8 4M01

Infrared Array Sensor Grid-EYE (AMG8854M01) *1: fps: frame per second *2: Normal Mode : normal operation mode Sleep Mode: detection is off (output and data reading not possible) Should a safety concern arise regarding this product, please be sure to contact us immediately. 30-Sep-20 Frame rate Typical 10 fps or 1 fps*1 Normal Output mode Sleep Calculate mode Temperature output resolution 0.25 ℃ 0.45 ℉ I2C slave address Thermistor output temperature range 1101 000 Performance Characteristics Item Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Sensor internal circuit Setup time Current consumption Typical 4.5 mA (normal mode) Thermistor output resolution 0.0625 ℃ 0.1125 ℉ Temperature output No moving average or Twice moving average Operating mode*2 Typical 0.2 mA (sleep mode) Typical 50 ms (Time to enable communication after setup) External interface Performance I2C (CLK is 50 kHz or less) 15 s or more (Time to stabilize output after setup) Item Performance Number of pixel Typical ±3.0 ℃ ±5.4 ℉ Viewing angle Typ. 35.6 ° Temperature accuracy 64 (Vertical 8 × Horizontal 8 Matrix) Sensor Selector Gain GND VDD Thermistor ADC Control ROM I2C I/F SDA SCL

Infrared Array Sensor Grid-EYE (AMG8854M01) *1: Please connect VPP pin and VDD pin by an external circuit. *2: For SDA and SCL pins connect a pull-up resistor between VDD pin by an external circuit. (1) Pixel array (2) Viewing field Pixel array from 1 to 64 is shown below. Sensor viewing field (typical) is shown below. (1) Each pixel’s viewing central angle (2) Each pixel’s viewing angle (half angle) Should a safety concern arise regarding this product, please be sure to contact us immediately. 30-Sep-20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Print board circuit Pixel array and viewing field Optical properties Vertical viewing central angle (° ) Horizontal viewing central angle (° ) Each pixel’s horizontall viewing angle (°) Pixel number 1 5 9 13 17 21 25 29 33 37 41 45 49 5357 610 Each pixel’s vertical viewing angle (°) Pixel number 1 5 9 13 17 21 25 29 33 37 41 45 49 5357 61 Horizontal viewing angle 35.6° Vertical viewing angle 35.6°

Infrared Array Sensor Grid-EYE (AMG8854M01) Connector Maker : J.S.T connector Housing : ZHR-5 Contact : SZH-00*T-P0.5 Note) ￡1、￡2 is center line of the 2.6×2.6 part. ￡3 is center line of φ2.0 part. General tolerance : ±0.3 unit : mm Dimensions Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 30-Sep-20 Part No. & Lot No. 6.75 2.5 2.0 5.3 6.0 8.0 12.0 16.0 □2.6 Lens ￡2 ￡3 11.6 8.9 (5.0) 5.93 1.0 Stamp mark area 10.5 3.5 Pitch 1.5 ￡1 (3.7) SDA SCL VPP VDD GND

■ If you want to use our products described in this online catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially cause personal injury (e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety equipment), it is necessary to verify whether the specifications of our products fit to such applications. Please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. ■ The quality and performance of our products as described in this online catalog only apply to our products when used in isolation. Therefore, please ensure you evaluate and verify our products under the specific circumstances in which our products are assembled in your own products and in which our products will actually be used. ■ If you use our products in equipment that requires a high degree of reliability, regardless of the application, it is recommended that you set up protection circuits and redundancy circuits in order to ensure safety of your equipment. ■ The products and product specifications described in this online catalog are subject to change for improvement without prior notice. Therefore, please be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, purchase, or use our products. ■ The technical information in this online catalog provides examples of our products' typical operations and application circuits. We do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. ■ If any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and export control, shall be observed. ■ The switchover date for compliance with the RoHS Directive/REACH Regulations varies depending on the part number or series of our products. ■ When you use the inventory of our products for which it is unclear whether those products are compliant with the RoHS Directive/REACH Regulation, please select "Sales Inquiry" in the website inquiry form and contact us. We do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. 01-Oct-19 Guidelines and precautions regarding the technical information and use of our products described in this online catalog. <Regarding the Certificate of Compliance with the EU RoHS Directive/REACH Regulations>

  • Do not use these sensors under any circumstances in which the range of their ratings, environment conditions or other specifications are exceeded. Using the sensors in any way which causes their specifications to be exceeded may generate abnormally high levels of heat, emit smoke, etc., resulting in damage to the circuitry and possibly causing an accident.
  • Before connecting a connector, check the pin layout by referring to the connector wiring diagram, specifications diagram, etc., and make sure that the connector is connected properly. Take note that mistakes made in connection may cause unforeseen problems in operation, generate abnormally high levels of heat, emit smoke, etc., resulting in damage to the circuitry.
  • Do not use any motion sensor which has been disassembled or remodeled.
  • Protection circuit recommended. The possible failure mode is either open or short of the output transistor. An excess heat is the cause for short mode failure. For any important and serious application in terms of safety, add protection circuit or any other protection method. ・ Various safety equipment and safety equipment ・ Traffic light ・ Security crime prevention equipment ・ Equipment concerning control and safety of trains, cars, etc. ・ Applications such as temperature control using sensor output etc. (Grid-EYE)
  • If it is expected that malfunction of each sensor may cause injury to persons or serious expansion damage, be sure to implement safety measures such as double safety circuit. The products and specifications listed in this document are subject to change for product improvement, etc. (including specification changes and discontinued manufacturing). When examining mass-production design or placing an order for the listed products, please contact Panasonic to make sure that the information listed in this document is up-to-date.
  • If it is expected that malfunction of each sensor may cause injury to persons or serious expansion damage, be sure to implement safety me Reference Standards : Computers, office automation equipment, communications equipment, audio-video products, home electrical appliances, machine tools, personal devices, industrial robots. Special Standards : Transportation equipment (automobiles, trains, ships, etc.), traffic signal equipment, crime and disaster prevention devices, electric power equipment, various safety devices, and medical equipment not directly targeted for life support. Specified Standards : Aircraft equipment, aeronautical and space equipment, seabed relay equipment, nuclear power control systems, and medical equipment, devices and systems for life support.
  • Before considering the use of our products under the following conditions, you must contact one of our customer service representatives without fail and exchange written specifications. ・ When our products are to be used in any of the applications listed for the Special Standards or Specified Standards. ・ When, even for any of the applications listed for the Reference Standards, our products may possibly be used beyond the range of the specifications, environment or conditions listed in the document or when you are considering the use of our products in any conditions or an environment that is not listed in the document. [Acceptance Inspection] For a purchased or delivered product, please conduct an acceptance inspection promptly with adequate consideration given to the management and maintenance of the product before and during the acceptance inspection. [Warranty Period] The warranty period of these products is one year after the purchase or delivery to a location designated by your company, unless otherwise specified by both parties. [Scope of Warranty] If a failure or a defect attributable to Panasonic is found during the warranty period, we will promptly provide a replacement or a necessary replacement part or change/repair the defective part free of charge at the location of the purchase or delivery. The warranty does not cover a failure or a defect when any of the following applies : (1) Caused by specifications, standards, or handling methods, etc. designated by your company. (2) Caused by modification of the structure, capabilities, or specifications, etc., in which Panasonic is not engaged, carried out after the purchase or delivery. (3) Caused by an unforeseen phenomenon that cannot be predicted with the technologies available after the time of the purchase or at the time of concluding the agreement. (4) When the product was used outside the scope of the conditions/environments described in the catalog or specifications. (5) When the product is incorporated in your company's equipment for use, damages that could be avoided if your company's equipment had industry-standard functions, structures, etc. (6) Caused by natural disasters or Force Majeure. The warranty described here is limited to the purchased or delivered product only and does not cover any consequential damages arising from the failure or defect of the product. [Before Purchase]
  • The standard prices of the products listed in this catalog do not include consumption tax, delivery, installation & adjustment fees, used product collection fees, etc.
  • The specifications/appearance are subject to change without notice for product improvement.
  • The export of products that fall into the category of strategic goods (or services) require an export (or a service transaction) license under the Foreign Exchange and Foreign Trade Law. Please contact Panasonic for details.
  • For details of the products listed in this catalog, please contact distributors, specialty contractor stores, or Panasonic. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 31-Mar-20 Safety precautions Request for ordering and use

Infrared Array Sensor Grid-EYE (AMG8854M01) ■ Head the following precautions to prevent injury or accidents. (1) We take no responsibility for troubles caused by the product usage that is not specified in this specification. Using the sensors in any way which causes their specifications to be exceeded may generate abnormally high levels of heat, emit smoke, etc., resulting in damage to the circuitry and possibly causing an accident. (2) Before connecting a connector, check the pin layout by referring to the connector wiring diagram, specifications diagram, etc., and make sure that the connector is connected properly. Take note that mistakes made in connection may cause unforeseen problems in operation, generate abnormally high levels of heat, emit smoke, etc., resulting in damage to the circuitry. (3) If the module heats up abnormally or smells abnormal, stop using it immediately by turning off the main power supply of the device etc. (4) The fact remains that electrical components and devices generally cause failures at probability. Furthermore, their durability varies with use environments or use conditions. In this respect, we ask you to check for actual electrical components and devices under actual conditions before use without fail. (5) Failure modes of sensors include short-circuiting, open-circuiting and temperature rises. If the failure of the product is considered to cause a personal injury or death or property damage, the safety rate should be added to the specified values shown in this specifications and please consider the fail-safe design in the following considerations and ensure safety. ・ Provide protection circuits and protection devices to ensure system safety. ・ Provide of a redundant circuit so that a malfunction does not make the system unsafety. (6) When a dogma shall be occurred about safety for this product, be sure to inform us rapidly, operate your technical examination. ■ Precaution for fundamental structure of sensor Infrared Array Sensor is a thermopile type infrared sensor which detects the amount of infrared rays. Below conditions generally degrade the temperature accuracy. Carefully check the performance and stability under actual use conditions, and perform temperature corrections when necessary. (1) When heating elements exist near the setting position of the sensor. (2) When the sensor is exposed to cold or hot air. (3) When the temperature of the sensor body rapidly changes. (4) When substances (e.g., glasses, acrylics or steams), which hardly transmit a far infrared ray, exist between the sensor and the detected object. (5) When substances (e.g., foreign substances or water), which hardly transmit a far infrared ray, adhere to the lense of the sensor. ■ Use environment (1) Temperature: See the specifications (2) Humidity: 15 % to 85 % R.H. (Avoid freezing and dew condensation) (3) Atmospheric pressure: Between 86 kPa to 106 kPa (4) Vibrations and shocks may damage the sensor, and cause malfunction and performance deterioration. If loads and shocks are applied on the lense, the damaged sensor may cause malfunction and performance deterioration. (5) The product is not water/splash-proof. Perform water/dust-proofing and dew condensation / freezing countermeasures in accordance with use environment. When dew condensation occurs, responsiveness of heat source detection may delay for several seconds. Be careful to solder migration caused by adhesion of water droplets on solder parts. (6) Avoid use and storage in the corrosive gas (organic solvent, sulfurous acid and hydrogen sulfide gases) to avoid malfunction and performance deterioration. (7) Use surge absorbers as applying the external surge voltage may damage the internal circuit. (8) Malfunction may occur near electric noises from static electricity, lightning, broadcast or amateur radio stations and mobile phones. (9) The sensor can continuously operate within the range of using ambient temperature (using ambient humidity). However, ensure that humidity is within the range below as humidity varies according to temperature. Avoid the continuous operation near the operational limit. Before use, check the stability under the usage environment as high humidity or high temperatures generally accelerates deterioration of the electronic component. ・ The temperature range does not guarantee the durability 30-Sep-20 Safety Precautions Notes Tolerance range Avoid freezing at 0 ℃ 32 ℉ or below Avoid dew condensation at 0 ℃ 32 ℉ or below －20 0 80 Humidity (%RH) Temperature (℃ ℉)

Infrared Array Sensor Grid-EYE (AMG8854M01) ■ Cleaning If the dirt or water droplet is attached to the lens, wipe it with soft cloth. The lens is damaged when strongly rubbed, and causes the characteristic deterioration. Avoid ultrasonic cleaning since this may cause breaks or disconnections in the wiring. ■ Storage and transportation (1) Excessive vibrations and shocks during transport may damage the product. Carefully handle the exterior box. (2) Extremely bad storage conditions may characteristics, and defect the appearance. Recommended conditions of the storage place are below. ・ Temperature : 0 to 45 ℃ 32 to 113 ℉ ・ Humidity : Below 70 % R.H. ・ Atmosphere : Low-dust and free from noxious chemicals such as sulfurous acid gas ■ Other handling cautions (1) To assure reliability, check the sensor under actual loading conditions. Avoid any situation that may adversely affect its performance. (2) This product may malfunction if dropped on its own before it is installed. Do not use if this happens. (3) If the sensor get high frequency vibration, it can be cause of breakdown. When the product get impulse like below, do not use it. ・ Touch to a object made of metal ・ Touch of mutual sensors (4) Since static charge can damage the sensor, bear in mind the following handling precautions. ・ Plastic containers should not be used to store or transport the sensors since they readily become charged. ・ Store or transport the product in an environment that hinders the occurrence of static electricity (for example, places with 45% to 60% humidity) and protect the product using electrically conductive packaging. ・ Implement static electricity prevention measures once the product packaging has been opened. ・ Any personnel handling the sensor should wear electrostatic clothing and be body grounded. ・ Place an electrically conducting board on the work surface and ground any devices used such as measuring instruments and jigs. (5) Do not use this product which has been disassembled or remodeled. ■ Special remarks Although the best attention will be paid for the quality controls of the products, consider the followings contents. (1) This product is designed to use in general applications at general electric equipment (Household electric appliances, AV products, office equipment, information and equipment, etc.). This product is not an important safety product. This product is not equipped with fail proof/fault diagnosis functions. If there is possibilities to occur failure or malfunction of this product which may cause unsafe event such as (a)～(d) and damage to personnel’s life, body and property, we will be not responsible for any loss or damage caused by the use of products. (a) Fire accident（Fire, smoke） (b) Electrocution（Electric shock） (c) Damages（Fall down/Explosion/Poisoning） (d) Fire/electrocution/damages at life end (2) This specification shows the quality and performance of a unit component. Before adoption, be sure to evaluate and verify the product mounting it in your product. (3) Unless otherwise stipulated by both parties, the warranty period of our products is one year after their purchase by you or after their delivery to the location specified by you. (4) In the event that we are found to blame for any failures or defects in our products during the warranty period, we will provide replacements or supply the necessary spare parts or replace and/or repair the defective sections free of charge and with all due speed at the location where the products concerned were purchased or delivered. However, the following failures and defects are not covered by the warranty: ・ When the failure or defect was caused by a specification, standard, handling method, etc. which was specified by you. ・ When the failure or defect was caused after purchase by you or delivery to your premises by an alteration in construction, performance, specification, etc. which did not involve us. ・ The case that the product condition changed by handling, storage and / or transportation after delivery. ・ When the failure or defect was caused by a phenomenon that could not be predicted by the technology that was being applied in practice either after purchase by you or at the time when the contract was signed. ・ When the use of our products deviated from the scope of the conditions and environment set forth in the specifications. ・ When, after our products were incorporated into your products or equipment for use, damage resulted which could have been avoided if your products or equipment had been equipped with the functions, construction, etc. the provision of which is accepted practice in the industry. ・ When the failure or defect was caused by a natural disaster or other force majeure. The terms and conditions of the warranty here set forth apply solely to the warranty of the discrete products which were purchased by you or delivered to your premises, and they do not cover any damage induced by their failure or defects. 30-Sep-20 Notes

Infrared Array Sensor Grid-EYE (AMG8854M01) (5) The products and specifications described in this document are subject to change (including specification changes and production suspension) due to product improvements. When considering a using a new products, please contact our sales office to confirm that the information in this specifications is up-to-date. (6) In connection wit : 0 to 45 ℃ 32 to 113 ℉ that you perform a : Below 70 % R.H. before and during : Low-dust and free from noxious chemicals such as sulfurous acid gas our products. (7) As to the disposal of the product, check the method of disposal in each country or region where the product are incorporated in your products to be used. (8) The technical information in this specification provides examples of our products' typical operations and application circuits. We do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. do not use it. ・ Touch to a object made of metal ・ Touch of mutual sensors Notes 30-Sep-20