AM3933P ANALOGPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
May, 2005 - Rev. A PRELIMINARY Publication Order Number: DS-AM3933_B These miniature surface mount MOSFETs utilize High Cell Density process. Low rDS(on) assures minimal power loss and conserves energy, making this device ideal for use in power management circuitry. Typical applications are DC-DC converters, power management in portable and battery-powered products such as computers, printers, PCMCIA cards, cellular and cordless telephones. VDS (V) r DS(on) (OHM) I D (A) -26.5 PRODUCT SUMMARY P-Channel 30-V (D-S) MOSFET
- L o w r DS(on) Provides Higher Efficiency and Extends Battery Life
- Miniature TSOP-6 Surface Mount Package Saves Board Space Notes a. Surface Mounted on 1” x 1” FR4 Board. b. Pulse width limited by maximum junction temperature Symbol Maximum Units VDS -26.5 VGS ±12 TA=25 o C- 2 . 5 TA=70 o C- 1 . 9 IDM -10 IS ±1.6 A TA=25 o C1 . 1 5 TA=70 o C0 . 7 TJ, Tstg -55 to 150 o C Continuous Source Current (Diode Conduction) a A BSOLUTE MA XIMUM RA TINGS (TA = 25 oC UNLESS OTHERWISE NOTED) Parameter Pulsed Drain Current b V Gate-Source Voltage Drain-Source Voltage Continuous Drain Current a ID A Power Dissipation a PD Operating Junction and Storage Temperature Range W P-Channel MOSFET P-Channel MOSFET TSOP-6 Top View Symbol Typ Max t <= 10 sec 93 110 Steady State 130 150 THERMAL RESISTANCE RATINGS Maximum Junction-to-Ambienta oC/WRthJA Parameter
May, 2005 - Rev. A PRELIMINARY Publication Order Number: DS-AM3933_B Notes a. Pulse test: PW <= 3 00us duty cycle <= 2%. b. Guaranteed by design, not subject to production testing . Analog Power (APL) reserves the right to make changes without further notice to any products herein. APL makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does APL assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in APL data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. APL does not convey any license under its patent rights nor the rights of others. APL products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the APL product could create a situation where personal injury or death may occur. Should Buyer purchase or use APL products for any such unintended or unauthorized application, Buyer shall indemnify and hold APL and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that APL was negligent regarding the design or manufacture of the part. APL is an Equal Opportunity/Affirmative Action Employer. Min Typ Max Gate-Threshold Voltage V GS(th) VDS = VGS, ID = -250 uA -1.00 G ate-Body Leakage I GSS VDS = 0 V, VGS = +/-12 V ±100 nA VDS = -21 V, VGS = 0 V -1 VDS = -21 V, VGS = 0 V, TJ = 55oC -10 On-State Drain Current A ID(on) VDS = -5 V, VGS = -4.5 V -3 A Forward Tranconductance A gfs VDS = -5 V, ID = -2.5 A 3 S Diode Forward V oltage V SD IS = -1.6 A, VGS = 0 V -0.70 V Total Gate Charge Q g 6.0 G ate-Source Charge Q gs 0.80 Gate-Drain Charge Q gd 1.30 Input Capacitance Ciss 451 Output Capacitance Coss 130 Reverse Transfer Capacitance Crss 33 Turn-On Delay Time t d(on) 6.5 Ris e Time t r 20 Turn-Off Delay Time t d(of f ) 31 Fall-Time t f 21 VDD = -5 V, RL = 5 OHM, VGEN = -4.5 V, RG = 6 OHM ns Drain-Source On-Resistance A Dynamicb VDS = -5 V, VGS = -4.5 V, ID = -2.5 A nC ΩrDS(on) P-Channel V DS=-15V , VGS=0V, f=1MHz pF SPECIFICATIONS (TA = 25oC UNLESS OTHERWISE NOTED) uAIDSSZero G ate V oltage Drain Current Static Test ConditionsSymbolParameter Limits Unit
May, 2005 - Rev. A PRELIMINARY Publication Order Number: DS-AM3933_B
Package Information
TSOP-6: 6LEAD