AM2342N ANALOGPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Publication Order Number: DS-AM2342_A These miniature surface mount MOSFETs utilize a high cell density trench process to provide low rDS(on ) and to ensure minimal power loss and heat dissipation. Typical applications are DC -DC converters and power management in portable and battery -powered products such as computers, printers, PCMCIA cards, cellular and cordless telephones. VDS (V) rDS(on) m(O) ID (A) 86 @ VGS = 10V 5.2 128 @ VGS = 4.5V 3.7 PRODUCT SUMMARY N-Channel 40-V (D-S) MOSFET
- Low rDS(on ) provides higher efficiency and extends battery life
- Low thermal impedance copper leadframe SOT-23 saves board space
- Fast switching speed
- High performance trench technology Notes a. Surface Mounted on 1” x 1” FR4 Board. b. Pulse width limited by maximum junction temperature Symbol Limit Units VDS 40 VGS ±20 TA=25oC 5.2 TA=70oC 4.1 IDM 30 IS 1.6 A TA=25oC 1.3 TA=70oC 0.8 TJ, Tstg -55 to 150 oC Power Dissipationa PD Operating Junction and Storage Temperature Range W Continuous Source Current (Diode Conduction)a ABSOLUTE MAXIMUM RATINGS (T A = 25 oC UNLESS OTHERWISE NOTED) Parameter Pulsed Drain Currentb V Gate-Source Voltage Drain-Source Voltage Continuous Drain Currenta ID A Symbol Maximum Units t <= 5 sec 100 o C/W Steady-State 166 o C/W THERMAL RESISTANCE RATINGS Parameter Maximum Junction-to-Ambienta R?JA D S G
Publication Order Number: DS-AM2342_A Notes a. Pulse test: PW <= 300us duty cycle <= 2%. b. Guaranteed by design, not subject to production testing. Analog Power (APL) reserves the right to make changes without further notice to any products herein. APL makes no warranty, representation or guarantee regarding the suitability of its products for any p articular purpose, nor does APL assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any an d all liability, including without limitation special, consequen tial or incidental damages. “Typical” parameters which may be provided in APL data sheets and/or specifications can and do vary in different appli cations and actual performance may vary over time. All operating parameters , including “ Typicals” must be validated for each customer application by customer’s technical experts. APL does not convey any license u nder its patent rights nor the rights of others. APL products a re not designed, intended, or authorized for use as components in systems intende d for surgical implant into the body, or other applications inte nded to support or sustain life, or for any other application in which the failure of the APL product could create a situation where personal injur y or death may occur. Should Buyer purchase or use APL products for any such unintende d or unauthorized application, Buyer shall indemnify and hold AP L and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and r easonable attorney fees arising out of, directly or indirectly, any claim of person al injury or death associated with such unintended or unauthoriz ed use, even if such claim alleges that APL was negligent regarding the design or man ufacture of the part. APL is an Equal Opportunity/Affirmative A ction Employer. Min Typ Max Gate-Threshold Voltage VGS(th) VDS = VGS, ID = 250 uA 1 V Gate-Body Leakage IGSS VDS = 0 V, VGS = 20 V ±100 nA VDS = 32 V, VGS = 0 V 1 VDS = 32 V, VGS = 0 V, TJ = 55oC 25 On-State Drain CurrentA ID(on) VDS = 5 V, VGS = 10 V 20 A VGS = 10 V, ID = 5.2 A 86 VGS = 4.5 V, ID = 3.7 A 128 Forward TranconductanceA gfs VDS = 15 V, ID = 5.2 A 40 S Diode Forward Voltage VSD IS = 2.3 A, VGS = 0 V 0.7 V Total Gate Charge Qg 4.0 Gate-Source Charge Qgs 1.1 Gate-Drain Charge Qgd 1.4 Turn-On Delay Time td(on) 16 Rise Time tr 5 Turn-Off Delay Time td(off) 23 Fall-Time tf 3 Unit VDD = 25 V, RL = 25 O , ID = 1 A, VGEN = 10 V nS Drain-Source On-ResistanceA rDS(on) mO VDS = 15 V, VGS = 4.5 V, ID = 5.2 A nC Dynamicb uAIDSSZero Gate Voltage Drain Current Static Test ConditionsSymbolParameter Limits
Publication Order Number: DS-AM2342_A