AM3456NE ANALOGPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Publication Order Number: DS-AM3456NE_A These miniature surface mount MOSFETs utilize a high cell density trench process to provide low rDS(on) and to ensure minimal power loss and heat dissipation. Typical applications are DC-DC converters and power management in portable and battery-powered products such as computers, printers, PCMCIA cards, cellular and cordless telephones. N-Channel 30V (D-S) MOSFET

  • L o w r DS(on) provides higher efficiency and extends battery life
  • Low thermal impedance copper leadframe TSOP-6 saves board space
  • Fast switching speed
  • High performance trench technology Notes a. Surface Mounted on 1” x 1” FR4 Board. b. Pulse width limited by maximum junction temperature Symbol Maximum Units VDS 30 VGS ±20 TA=25 o C5 . 5 TA=70 o C4 . 4 IDM ±20 IS 1.3 A TA=25 o C2 . 0 TA=70 o C1 . 3 TJ, Tstg -55 to 150 o C Continuous Source Current (Diode Conduction) a ABSOLUTE MAXIMUM RATINGS (T A = 25 oC UNLESS OTHERWISE NOTED) Parameter Pulsed Drain Current b V Gate-Source Voltage Drain-Source Voltage Continuous Drain Current a ID A Power Dissipation a PD Operating Junction and Storage Temperature Range W VDS (V) r DS(on) (Ω)I D (A) 0.032 @ VGS = 10 V 5.3 0.044 @ VGS = 4.5V 4.5 PRODUCT SUMMARY Symbol M aximum Units t <= 5 sec 85 Steady-State 62.5 THERMAL RESISTANCE RATINGS Parameter o C/WMaximum Junction-to-Ambient a RTHJA ESD Protected 2000V

Publication Order Number: DS-AM3456NE_A Notes a. Pulse test: PW <= 3 00us duty cycle <= 2%. b. Guaranteed by design, not subject to production testing. Analog Power (APL) reserves the right to make changes without further notice to any products herein. APL makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does APL assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in APL data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. APL does not convey any license under its patent rights nor the rights of others. APL products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the APL product could create a situation where personal injury or death may occur. Should Buyer purchase or use APL products for any such unintended or unauthorized application, Buyer shall indemnify and hold APL and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that APL was negligent regarding the design or manufacture of the part. APL is an Equal Opportunity/Affirmative Action Employer. Min Typ Max Gate-Body Leakage I GSS VDS = 0 V, VGS = ±8 V ±100 nA VDS = 24 V, VGS = 0 V 1 VDS = 24 V, VGS = 0 V, TJ = 55oC 10 Gate-Threshold Voltage V GS(th) VDS = VGS, ID = 250 uA 1.0 V VGS = 10 V, ID = 5.3 A 32 VGS = 4.5 V, ID = 4.5 A 44 Forward TranconductanceA gfs VDS = 10 V, ID = 5.3 A 45 S On-State Drain Current A ID(on) VDS = 5 V, VGS = 10 V 20 A Diode Forward Voltage V SD IS = 1.3 A, VGS = 0 V 0.75 V Total Gate Charge Q g 4.0 Gate-Source Charge Q gs 1.1 Gate-Drain Charge Q gd 1.4 Turn-On Delay Time t d(on) 6 Rise Time t r 10 Turn-Off Delay Time t d(off) 18 Fall-Time t f 5 Dynamicb SPECIFICATIONS (TA = 25oC UNLESS OTHERWISE NOTED) uAIDSSZero Gate Voltage Drain Current Switch Off Characteristics Test ConditionsSymbol Drain-Source On-ResistanceA rDS(on) VDS = 15 V, RL = 6 Ω, ID = 1 A, VGEN = 10 V ns VDS = 15 V, VGS = 5 V, ID = 5.3 A RL = 6 Ω nC mΩ Parameter Limits Unit Switch On Characteristics

Publication Order Number: DS-AM3456NE_A

Package Information

TSOP-6: 6LEAD