AM3407PE ANALOGPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

P-Channel 20-V (D-S) MOSFET VDS (V) ID(A) Source: 4 Symbol Limit Units VDS -20 VGS ±12 TA=25°C -5 TA=100°C -3.3 IDM -20 IS -1 A Power Dissipation a TA=25°C PD 1.40 W TJ, Tstg -55 to 150 °C Symbol Maximum Units 62.5 110 Notes a. Surface Mounted on 1” x 1” FR4 Board. b. Pulse width limited by maximum junction temperature ABSOLUTE MAXIMUM RATINGS (TA = 25°C UNLESS OTHERWISE NOTED) Parameter -20 Drain-Source Voltage VGate-Source Voltage PRODUCT SUMMARY rDS(on) (mΩ) 34 @ VGS = -4.5V 48 @ VGS = -2.5V Drain: 1,2,5,6 Gate: 3 Operating Junction and Storage Temperature Range THERMAL RESISTANCE RATINGS Parameter Maximum Junction-to-Ambient a t <= 10 sec RθJA °C/WSteady State ID A Pulsed Drain Current b Continuous Source Current (Diode Conduction) a Continuous Drain Current a Key Features:

  • Low rDS(on) trench technology
  • Low thermal impedance
  • Fast switching speed Typical Applications:
  • Battery Powered Instruments
  • Portable Computing
  • Mobile Phones
  • GPS Units and Media Players TSOP6 © Preliminary 1 Publication Order Number: DS-AM3407PE-2010

Parameter Symbol Test Conditions Min Typ Max Unit Gate-Source Threshold Voltage VGS(th) VDS = VGS, ID = -250 uA -20 V Gate-Body Leakage IGSS VDS = 0 V, VGS = ±12 V ±10 uA VDS = -16 V, VGS = 0 V -1 VDS = -16 V, VGS = 0 V, TJ = 85°C -30 On-State Drain Current ID(on) VDS = -5 V, VGS = -4.5 V 10 A VGS = -4.5 V, ID = -5 A 34 VGS = -2.5 V, ID = -3 A 48 Forward Transconductance gfs VDS = -15 V, ID = -5 A 10 S Diode Forward Voltage VSD IS = -1.0 A, VGS = 0 V -0.7 V Total Gate Charge Qg 16 Gate-Source Charge Qgs 4 Gate-Drain Charge Qgd 5 Turn-On Delay Time td(on) 6 Rise Time tr 12 Turn-Off Delay Time td(off) 75 Fall Time tf 38 Input Capacitance Ciss 1450 Output Capacitance Coss 200 Reverse Transfer Capacitance Crss 165 Notes a. Pulse test: PW <= 300us duty cycle <= 2%. b. Guaranteed by design, not subject to production testing. ns VDS = -10 V, VGS = -4.5 V, ID = -5 A

Electrical Characteristics

Drain-Source On-Resistance rDS(on) mΩ Dynamic Zero Gate Voltage Drain Current Static uAIDSS nC VDD = -10 V, RL = 10 Ω, ID = -1 A, VGEN = -4.5 V, RGEN = 6 Ω VDS = -10 V, VGS = 0 V, f = 1 MHz Analog Power (APL) reserves the right to make changes without further notice to any products herein. APL makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does APL assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in APL data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. APL does not convey any license under its patent rights nor the rights of others. APL products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the APL product could create a situation where personal injury or death may occur. Should Buyer purchase or use APL products for any such unintended or unauthorized application, Buyer shall indemnify and hold APL and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that APL was negligent regarding the design or manufacture of the part. APL is an Equal Opportunity/Affirmative Action Employer. pF © Preliminary 2 Publication Order Number: DS-AM3407PE-2010

Typical Electrical Characteristics © Preliminary 3 Publication Order Number: DS-AM3407PE-2010

Typical Electrical Characteristics © Preliminary 4 Publication Order Number: DS-AM3407PE-2010

2.90 BSC

2.890 BSC

1.45 0.95BSC 1.90BSC 0.15 1.30.9 0.3 0.6 1.5 0.08 1.7 0.25 0.3 0.5 MIN. MAX. Dimensions In Millimeters --- ---

Package Information

L e b c A Symbol E D TSOP6 © Preliminary 5 Publication Order Number: DS-AM3407PE-2010