AM3403P ANALOGPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Publication Order Number: DS-AM3403_A These miniature surface mount MOSFETs utilize a high cell density trench process to provide low rDS(on) and to ensure minimal power loss and heat dissipation. Typical applications are DC-DC converters and power management in portable and battery-powered products such as computers, printers, PCMCIA cards, cellular and cordless telephones. P-Channel 30-V (D-S) MOSFET

  • Low rDS(on) provides higher efficiency and extends battery life
  • Low thermal impedance copper leadframe TSOP-6 saves board space
  • Fast switching speed
  • High performance trench technology Notes a. Surface Mounted on 1” x 1” FR4 Board. b. Pulse width limited by maximum junction temperature 3 4 VDS (V) rDS(on) (O) ID (A) PRODUCT SUMMARY -30 Symbol Maximum Units VDS -30 VGS ±20 TA=25o C -4.0 TA=70o C -3.2 IDM ±20 IS -1.7 A TA=25o C 2.0 TA=70o C 1.3 TJ, Tstg -55 to 150 o C Continuous Source Current (Diode Conduction)a ABSOLUTE MAXIMUM RATINGS (T A = 25 oC UNLESS OTHERWISE NOTED) Parameter Pulsed Drain Currentb V Gate-Source Voltage Drain-Source Voltage Continuous Drain Currenta ID A Power Dissipationa PD Operating Junction and Storage Temperature Range W Symbol Maximum Units t <= 5 sec 62.5 o C/W Steady state 110 o C/W THERMAL RESISTANCE RATINGS Parameter RTHJAMaximum Junction-to-Ambienta

Publication Order Number: DS-AM3403_A Notes a. Pulse test: PW <= 300us duty cycle <= 2%. b. Guaranteed by design, not subject to production testing. Analog Power (APL) reserves the right to make changes without further notice to any products herein. APL makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does APL assume any liability arising outof the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in APL datasheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. APL does not convey any license under its patent rights nor the rights of others. APL products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the APL product could create a situation where personal injury or death may occur. Should Buyer purchase or use APL products for any such unintended or unauthorized application, Buyer shall indemnify and hold APL and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that APL was negligent regarding the design or manufacture of the part. APL is an Equal Opportunity/Affirmative Action Employer. Min Typ Max Gate-Threshold Voltage VGS(th) VDS = VGS, ID = 250 uA -1 Gate-Body Leakage IGSS VDS = 0 V, VGS = ±20 V ±100 nA VDS = -16 V, VGS = 0 V -1 VDS = -20 V, VGS = 0 V, TJ = 55oC -5 On-State Drain CurrentA ID(on) VDS = -5 V, VGS = -4.5 V -20 A VGS = -10 V, ID = -4.0 A 56 VGS = -4.5 V, ID = -3.4 A 86 Forward TranconductanceA gfs VDS = -5 V, ID = -3.4 A 10 S Diode Forward Voltage VSD IS = 1.3 A, VGS = 0 V -0.8 V Dynamicb Total Gate Charge Qg 6.4 Gate-Source Charge Qgs 1.9 Gate-Drain Charge Qgd 2.5 Turn-On Delay Time td(on) 7 Rise Time tr 10 Turn-Off Delay Time td(off) 30 Fall-Time tf 22 Drain-Source On-ResistanceA VDD = -20 V, RL = 6 O , ID = -1 A, VGEN = -10 V ns VDS = -20 V, VGS = -10 V, ID = -4.0 A nC rDS(on) mO SPECIFICATIONS (TA = 25oC UNLESS OTHERWISE NOTED) uAIDSSZero Gate Voltage Drain Current Static Test ConditionsSymbolParameter Limits Unit

Publication Order Number: DS-AM3403_A Typical Electrical Characteristics (P-Channel)

Publication Order Number: DS-AM3403_A Typical Electrical Characteristics (P-Channel)

Publication Order Number: DS-AM3403_A

Package Information

TSOP-6: 6LEAD