AM2520MGC09 TO-GRACE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

z Subminiature package. z Z -bend lead. z Long life - solid state reliability. z Low package profile. z Moisture sensitivity level : level 3. z Package : 1000pcs / reel. z RoHS compliant. Des cription The Mega Green source color devices are made with Al- GaInP on GaAs substrate Light Emitting Diode. Packag e Dimensions Not es: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 5. The device has a single mounting surface. The device must be mounted according to the specifications. 香港至恩科技有限公司 www.to-grace.com 公司授权代理销售LITE-ON:光耦，贴片LED灯等 进口原装，现货供应，价格优势，技术支持 电话：0755-83464948 传真：0755-83464076 A ll data sheet.com

SPEC NO: DSAD1291 REV NO: V.12B DATE: NOV/12/2015 PAGE: 2 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: M.Liu ERP: 1202000542 Selection Guide Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Electrical / Optical Characteristics at TA=25°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Part No. Emitting Color (Material) Lens Type Viewing Angle [1] Min. Typ. 2 θ1/2 AM2520MGC09 Mega Green (AlGaInP) Water Clear 500 1000 20° Iv (mcd) [2] @ 20mA Symbol Parameter Emitting Color Typ. Max. Units Test Conditions λpeak Peak Wavelength Mega Green 574 nm I F=20mA λD [1] Dominant Wavelength Mega Green 570 nm I F=20mA Δλ1/2 Spectral Line Half-width Mega Green 26 nm I F=20mA C Capacitance Mega Green 20 pF V F=0V;f=1MHz VF [2] Forward Voltage Mega Green 2.1 2.5 V I F=20mA IR Reverse Current Mega Green 10 uA V R=5V Parameter Values Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. A ll data sheet.com

SPEC NO: DSAD1291 REV NO: V.12B DATE: NOV/12/2015 PAGE: 3 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: M.Liu ERP: 1202000542 Mega Green AM2520MGC09 A ll data sheet.com

SPEC NO: DSAD1291 REV NO: V.12B DATE: NOV/12/2015 PAGE: 4 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: M.Liu ERP: 1202000542 AM2520MGC09 Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) A ll data sheet.com

SPEC NO: DSAD1291 REV NO: V.12B DATE: NOV/12/2015 PAGE: 5 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: M.Liu ERP: 1202000542 PACKING & LABEL SPECIFICATIONS AM2520MGC09 Terms and conditions for the usage of this document 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the produc t is being operated within the environmental and electrical limits specified in the dat asheet. If customer usage exceeds the spec ified limits, Kingbright will not be respon sible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applicati ons. If customer's application ha s special reliability requirements or have life-threatening liabilities, such as automotive or m edical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes A ll data sheet.com