AM2520F3C03 TO-GRACE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

z Subminiature package. z Mechanicall y and spectrally matched to the phototransistor. z Gull wing lead. z Long life - solid state reliability. z Low package profile. z Package : 1000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Des cription F3 Made with Gallium Arsenide Infrared Emitting diodes. Packag e Dimensions Not es: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 5. The device has a single mounting surface. The device must be mounted according to the specifications. 香港至恩科技有限公司 www.to-grace.com 公司授权代理销售LITE-ON:光耦，贴片LED灯等 进口原装，现货供应，价格优势，技术支持 电话：0755-83464948 传真：0755-83464076 A ll data sheet.com

SPEC NO: DSAB2262 REV NO: V.10A DATE: SEP/01/2016 PAGE: 2 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1202000467 Selection Guide Absolute Maximum Ratings at TA=25°C Electrical / Optical Characteristics at TA=25°C Parameter Emitting Color Symbol Typ. Max. Units Test Conditions Forward Voltage [1] F3 VF 1.2 1.6 V I F=20mA Reverse Current F3 I R 10 uA V R = 5V Capacitance F3 C 90 pF V F=0V;f=1MHz Peak Spectral Wavelength F3 λP 940 nm I F=20mA Spectral Bandwidth F3 Δλ1/2 50 nm I F=20mA Parameter Symbol Values Units Power dissipation PD 80 mW DC Forward Current I F 50 mA Peak Forward Current [1] i FS 1.2 A Reverse Voltage V R 5 V Operating Temperature T A -40 To +85 °C Storage Temperature TSTG -40 To +85 °C Part No. Emitting Color (Material) Lens Type Po (mW/sr) [2] @ 20mA Viewing Angle [1] Min. Typ. Min. Typ. 2 θ1/2 AM2520F3C03 Infrared (GaAs) Water Clear 5 10 10 20 20° *3 *8 *8 *16 Po (mW/sr) [2] @ 50mA Notes: 1. 1/100 Duty Cycle, 10μs Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Notes: 1.Forward Voltage: +/-0.1V. 2.Wavelength value is traceable to CIE127-2007 standards. 3.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Radiant Intensity / luminous flux: +/-15%. * Radiant intensity value is traceable to CIE127-2007 standards. A ll data sheet.com

SPEC NO: DSAB2262 REV NO: V.10A DATE: SEP/01/2016 PAGE: 3 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1202000467 AM2520F3C03 A ll data sheet.com

SPEC NO: DSAB2262 REV NO: V.10A DATE: SEP/01/2016 PAGE: 4 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1202000467 AM2520F3C03 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Specifications (Units : mm) Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. A ll data sheet.com

SPEC NO: DSAB2262 REV NO: V.10A DATE: SEP/01/2016 PAGE: 5 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: W.Q.Zhong ERP: 1202000467 PACKING & LABEL SPECIFICATIONS AM2520F3C03 Terms and conditions for the usage of this document 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the produc t is being operated within the environmental and electrical limits specified in the dat asheet. If customer usage exceeds the spec ified limits, Kingbright will not be respon sible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applicati ons. If customer's application ha s special reliability requirements or have life-threatening liabilities, such as automotive or m edical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes A ll data sheet.com