ALS-PT243-3C EVERLIGHT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 11
Technical content
Features
‧ Close responsively to the human eye spectrum ‧ Light to Current, analog output ‧ Good output linearity across wide illumination range ‧ Low sensitivity variation across various light sources ‧ Operation temperature performance, -40oC to 85 oC ‧ Wide supply voltage range, 2.5V to 5.5V ‧ Size : 5mm Lamp (Flat lens) ‧ RoHS compliant and Pb Free package
Description
The ALS-PT243-3C/L177 is consisting of phototransistor in DIP package. EVERLIGHT ALS series product are a good effective solution to the power saving of display backlighting of mobile appliances, such as the mobile phones, NB and PDAs. Due to the high rejection ratio of infrared radiation, the spectral response of the ambient light sensor is close to human eyes.
Applications
‧Detection of ambient light to control display backlighting Mobile devices – mobile phones, PDAs Computing device – TFT LCD monitor for Notebook computer Consumer device – TFT LCD TV, video camera, digital camera, toys ‧ Automatic residential and commercial management ‧ Automatic contrast enhancement for electronic signboard ‧ Ambient light monitoring device for daylight and artificial light – Street light, CCD/CCTV
Everlight Electronics Co., Ltd. http:\\\\www.everlight.com Document No: DAS-024-007 Rev1.1 Dec.31, 2007 2 5mm DIP Ambient Light Sensor ALS-PT243-3C/L177 Package Dimensions Collector Emitter Notes: 1.All dimensions are in millimeters 2.Tolerances unless dimensions ±0.1mm
Everlight Electronics Co., Ltd. http:\\\\www.everlight.com Document No: DAS-024-007 Rev1.1 Dec.31, 2007 3 5mm DIP Ambient Light Sensor ALS-PT243-3C/L177 Absolute Maximum Ratings (Ta=25 ℃℃℃℃) Parameter Symbol Rating Unit Supply Voltage [Note1] Vcc -0.5~6.0 V Operating Temperature Range T opr -40 ~ +85 °C Storage Temperature Range T stg -40 ~ +100 °C Soldering Temperature Range [Note1] Tsol 260 ± 10 °C Note1: For detail reflow time and the recommended temperature profile, please refer to page 8. Recommended Operating Conditions ( Ta=25 ℃℃℃℃) Parameter Symbol Min. Max. Unit Operating Temperature Topr -40 +85 °C Supply Voltage V cc 2.5 5.5 V Rankings Bin Symbol Min Max Unit Test Condition 1 5 12 2 12 17 IPH(ON) 17 23 μμμμA VCE =5V Ee=100Lux
Everlight Electronics Co., Ltd. http:\\\\www.everlight.com Document No: DAS-024-007 Rev1.1 Dec.31, 2007 4 5mm DIP Ambient Light Sensor ALS-PT243-3C/L177 Electrical and Optical Characteristics ( Ta=25 ℃℃℃℃) Parameter Symbol MIN TYP MAX. Unit Test Condition Dark Current ICEO --- --- 0.1 uA V CE =10V, E v= 0Lux Collector-Emitter Saturation Voltage V CE(sat) --- --- 0.4 V I C=2mA, E v= 1000Lux IPH1 7 10 --- uA VCE =5V, Ev= 100Lux [Note1] IPH2 200 230 --- uA VCE =5V, Ev= 1000Lux [Note1] Light Current IPH3 950 110 --- uA VCE =5V, Ev= 1000Lux [Note2] Photocurrent Ratio IPH3 / I PH2 --- 4.8 --- --- VCE =5V, Ev= 1000Lux Saturation Output Voltage V o 4.5 4.6 --- V Vcc =5V, Ev= 1000Lux RL=75K [Note2] Peak Sensitivity Wavelength λp --- 630 --- nm Sensitivity Wavelength Range λ 390 --- 700 nm Rise time tr --- 0.11 --- ms Fall time tf --- 0.22 --- ms VCC = 5 V RL = 7.5K Ω Angle of half Sensitivity Note: 1. White Fluorescent light (Color Temperature = 6500K) is used as light source. However, White LED is substituted in mass production. 2. Illuminance by CIE standard illuminant-A / 2856K, incandescent lamp.
Everlight Electronics Co., Ltd. http:\\\\www.everlight.com Document No: DAS-024-007 Rev1.1 Dec.31, 2007 5 5mm DIP Ambient Light Sensor ALS-PT243-3C/L177 -60 -40 -20 0 20 40 60 80 100 0.01 0.1 100 1000 10000 100000 VCE = 7V EV = 0 Lux Dark current (nA) Temperature ( )℃℃ ℃℃ Typical Electrical and Optical Characteristics Curves Fig.1 Light Current vs. Illuminance Fig.2 Output Voltage vs. Illuminance 1 10 100 1000 10000 0.01 0.1 Ta=25 o C; Vcc=5V Flourescent Light incandescent Lamp Output Current (mA) Illuminance Ev (Lux) 1 10 100 1000 10000 1E-4 1E-3 0.01 0.1 Ta=25 o C ; Vcc=5V Fluorescent light RL=1K Ω Fluorescent light RL=7.5K Ω Fluorescent light RL=75K Ω Ouput Voltage Vo (V) Illuminance Ev (Lux) Fig.3 Spectral Response Fig.4 Light current vs. Supply Voltage 0 1 2 3 4 5 6 7 8 EV = 100 Lux Light current (uA) Supply voltage (V) Fig.5 Light Current vs. Temperature Fig.6 Dark Current vs. Temperature -40 -20 0 20 40 60 80 100 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 Ev = 100 Lux Relative light current Temperature ( )℃℃ ℃℃
Everlight Electronics Co., Ltd. http:\\\\www.everlight.com Document No: DAS-024-007 Rev1.1 Dec.31, 2007 6 5mm DIP Ambient Light Sensor ALS-PT243-3C/L177 RL GND Vout Vcc CL Iph Light Source Converting Photocurrent to Voltage Note: 1. The output voltage (V out ) is the product of photocurrent (I PH ) and loading resistor (R L) 2. A right loading resistor shall be chosen to meet the requirement of maximum ambient light, and output saturation voltage: Vout (max.) = Iout (max.) × RL ≦ Vout (saturation) ＝ Vcc － 0.4V
Everlight Electronics Co., Ltd. http:\\\\www.everlight.com Document No: DAS-024-007 Rev1.1 Dec.31, 2007 7 5mm DIP Ambient Light Sensor ALS-PT243-3C/L177 Recommended method of storage Reflow Terms: JEDEC Level 4 Specification Dry box storage is recommended as soon as the aluminum bag has been opened prevent 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift might cause big current happen. (Burned-out might happen). 2. Storage (1) Do not open moisture proof bag before components are ready to use. (2) Before opening moisture proof bag, components should be kept at 30 ℃ or less and 90%RH or less. (3) Components should be used within a year. (4) After opened moisture proof bag, components should be kept at 30 ℃ or less and 70%RH or less. (5) Components should be used within 168 hours after opened moisture proof bag. (6) If the moisture absorbent material (silica gel) has faded away or the components have exceeded the storage time, baking treatment should be performed using the following conditions. (Baking treatment: 60±5 ℃ for 24 hours) ESD Precaution: Proper storage and handing procedures should be followed to prevent ESD damage to the devices especially when they are removed from the Anti-static bag. Electro-Static Sensitive Devices warning labels are on the packing.
Everlight Electronics Co., Ltd. http:\\\\www.everlight.com Document No: DAS-024-007 Rev1.1 Dec.31, 2007 8 5mm DIP Ambient Light Sensor ALS-PT243-3C/L177 Recommended Solder Profile Notice: (1) Reflow soldering should not be done more than two times. (2) When soldering, do not put stress on the devices during heating. (3) After soldering, do not warp the circuit board. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 ℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Repairing Repair should not be done after the device have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the device will or will not be damaged by repairing.
Everlight Electronics Co., Ltd. http:\\\\www.everlight.com Document No: DAS-024-007 Rev1.1 Dec.31, 2007 9 5mm DIP Ambient Light Sensor ALS-PT243-3C/L177 xxxxxx xxxxxx xxxxxxxxxxxx xxxx xxxxxxxx RoHS Packing Quantity Specification 1.500PCS/1Bag ，5Bags/1Box 2.10Boxes/1Carton Label Format
Everlight Electronics Co., Ltd. http:\\\\www.everlight.com Document No: DAS-024-007 Rev1.1 Dec.31, 2007 10 5mm DIP Ambient Light Sensor ALS-PT243-3C/L177 Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and instructions included in these specification sheets. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent.
Everlight Electronics Co., Ltd. http:\\\\www.everlight.com Document No: DAS-024-007 Rev1.1 Dec.31, 2007 11 5mm DIP Ambient Light Sensor ALS-PT243-3C/L177