ALS-PDIC17-77B-TR8

ALS-PDIC17-77B-TR8 EVERLIGHT | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 13

Technical content

Features

‧ Close responsively to the human eye spectrum ‧ Light to Current, analog output ‧ Good output linearity across wide illumination range ‧ Low sensitivity variation across various light sources ‧ Operating temperature performance, -40oC to 85 oC ‧ Wide supply voltage range, 1.8V to 5.5V ‧ Size : 1.6mm(L)*1.6mm(W)*0.55mm(H) ‧ RoHS compliant, Pb Free and halogen free package

Description

The ALS-PDIC17-77B/TR8 is consisting of a photodiode and a current amplification IC. EVERLIGHT ALS series product is a good effective solution to the power saving of display backlighting of mobile appliances, such as the mobile phones, NB and PDAs. Due to the high rejection ratio of infrared radiation, the spectral response of the ambient light sensor is close to that of human eyes.

Applications

‧Detection of ambient light to control display backlighting Mobile devices – mobile phones, PDAs Computing device – TFT LCD monitor for Notebook computer Consumer device – TFT LCD TV, Plasma TV, Video camera, Digital camera, Toys ‧ Automatic residential and commercial management ‧ Automatic contrast enhancement for electronic signboard ‧ Ambient light monitoring device for daylight and artificial light – Street light, CCD/CCTV

Everlight Electronics Co., Ltd. http://www.everlight.com Document No: DLS-0000020 Rev 1 M ar. 26, 2010 2 Surface - Mount Ambient Light Sensor ALS -PDIC1 7-77 B/TR8 Package Dimensions Unit: mm Top View Bottom View

Everlight Electronics Co., Ltd. http://www.everlight.com Document No: DLS-0000020 Rev 1 M ar. 26, 2010 3 Surface - Mount Ambient Light Sensor ALS -PDIC1 7-77 B/TR8 Absolute Maximum Ratings (Ta=25°C) Parameter Symbol Rating Unit Supply Voltage V cc -0.5~6.0 V Output Voltage V o 0 ~ Vcc-0.8 V Output Photo Current I PH 0 ~ 5 mA Operating Temperature Range T opr -40 ~ +85 °C Storage Temperature Range T stg -40 ~ +100 °C Soldering Temperature Range [Note1] Tsol 260 °C Note1: For detail reflow time and the recommended temperature profile, please refer to page 9. Recommended Operating Conditions ( Ta=25 °C) Parameter Symbol Min. Max. Unit Operating Temperature Topr -40 +85 °C Supply Voltage V cc 1.8 5.5 V

Everlight Electronics Co., Ltd. http://www.everlight.com Document No: DLS-0000020 Rev 1 M ar. 26, 2010 4 Surface - Mount Ambient Light Sensor ALS -PDIC1 7-77 B/TR8 Electrical and Optical Characteristics ( Ta=25 °C) Parameter Symbol Min. Typ. Max. Unit Test Condition Supply Current I cc － 480 950 µA Vcc = 3V, Ev = 1000Lux R L = 1k Ω [Note2] Dark Current I D － － 100 nA Vcc =3V Ev= 0Lux IPH1 3.2 4 4.8 µA Vcc =3V; E v=10Lux [Note1] [Fig.2] IPH2 32 40 48 µA Vcc =3V; E v= 100Lux [Note1] [Fig.2] IPH3 － 48 82 µA Vcc =3V; E v= 100Lux [Note2] [Fig.2] Light Current IPH4 － 400 480 µA Vcc =3V; E v=1000Lux [Note1] [Fig.2] Photocurrent Ratio I PH3 / I PH2 － 1.2 1.7 － Saturation Output Voltage Vo 2.20 2.35 － V Vcc =3V; E v= 100Lx, RL=150KΩ [Fig.3] Peak Sensitivity Wavelength λp － 600 － nm Rise Time tr － 11 1000 µs Fall Time tf － 400 2000 µs Delay Time td － 250 － µs Switching Time Storage Time ts － 35 － µs Vcc =3V,RL=5kΩ /uniF020/uniF020/uniF020/uniF020/uniF020/uniF020/uniF020/uniF020/uniF020/uniF020/uniF020/uniF020/uniF020/uniF020/uniF020/uniF020 [Fig.4] Note: 1. White Fluorescent light (Color Temperature = 6500K) is used as light source. However, White LED is substituted in mass production. 2. Illuminance by CIE standard illuminant-A / 2856K, incandescent lamp

Everlight Electronics Co., Ltd. http://www.everlight.com Document No: DLS-0000020 Rev 1 M ar. 26, 2010 5 Surface - Mount Ambient Light Sensor ALS -PDIC1 7-77 B/TR8 PDIC15-21C 2. Vcc 1. Vout 3. GND 4. GND Current Amp Fig.1 Block Diagram Fig.2 Measurement Method of Light Current Fig.3 Measurement Method of Saturation Output Voltage ALS-001 Light Source GND Vout IL Vcc I CC ALS-001 Light Source GND Vout Vcc R L Fig.4 Switching Time Measurement Method AS-3021 PDIC17-77B PDIC17-77B 1.Vcc 6. V out 2. GND 3. GND 4. GND 5. GND PDIC17-77B

Everlight Electronics Co., Ltd. http://www.everlight.com Document No: DLS-0000020 Rev 1 M ar. 26, 2010 6 Surface - Mount Ambient Light Sensor ALS -PDIC1 7-77 B/TR8 1 10 100 1000 10000 0.1 100 1000 10000 Fluorescent light Incandescent lamp Light current (uA) Illuminance (Lux) 2 3 4 5 6 7 0.0 0.4 0.8 1.2 1.6 Ta = 25℃℃ ℃℃ Relative light current Supply voltage (V) 200 300 400 500 600 700 800 900 1000 1100 1200 100 Relative sensitivity Wavelength (nm) 1 10 100 1000 10000 1E-3 0.01 0.1 Incandescent lamp R L = 100 k Ω Fluorescent light R L = 100 k Ω Incandescent lamp R L = 30 k Ω Fluorescent light R L = 30 k Ω Incandescent lamp R L = 5.1 k Ω Fluorescent light R L = 5.1 k Ω Vcc = 3V Ta = 25 Output voltage (V) Illuminance (Lux) Typical Electrical and Optical Characteristics Curves Fig.5 Light Current vs. Illuminance Fig.6 Dark Current vs. Temperature Fig.7 Light current vs. Temperature Fig.8 Light current vs. Supply Voltage -60 -40 -20 0 20 40 60 80 100 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 VCE = 3V EV = 100 Lux Relative light current Temperature ( )℃℃℃℃ Fig.9 Spectral Response Fig.10 Output Voltage vs. Illuminance

Everlight Electronics Co., Ltd. http://www.everlight.com Document No: DLS-0000020 Rev 1 M ar. 26, 2010 7 Surface - Mount Ambient Light Sensor ALS -PDIC1 7-77 B/TR8 1 10 100 1000 10000 0.1 100 1000 RL = 100 k Ω RL = 50 k Ω RL = 5.1 k Ω Vcc = 3V Ta = 25 ℃℃ ℃℃ Consumption current (uA) Illuminance (Lux) -40 -20 0 20 40 60 80 100 0.6 0.8 1.0 1.2 1.4 Vcc = 3V Ev = 100 Lux RL= 1k Ω Relative consumption current Temperature ( )℃℃ ℃℃ Fig.11 Consumption current vs. Illuminance Fig.12 Relative consumption current vs. Temperature

Everlight Electronics Co., Ltd. http://www.everlight.com Document No: DLS-0000020 Rev 1 M ar. 26, 2010 8 Surface - Mount Ambient Light Sensor ALS -PDIC1 7-77 B/TR8 RL GND Vout Vcc Amp Current CL Iph Converting Photocurrent to Voltage Note: 1. The output voltage (V out ) is the product of photocurrent (I PH ) and loading resistor (R L) 2. A right loading resistor shall be chosen to meet the requirement of maximum ambient light, and output saturation voltage: Vout (max.) = Iout (max.) × RL ≦ Vout (saturation) ＝ Vcc － 0.8V 3. To avoid 60Hz ripple from fluorescent lamps, we suggest that the time constant must be greater than 0.5 second: RL × CL ≧ 0.5 (empirical data)

Everlight Electronics Co., Ltd. http://www.everlight.com Document No: DLS-0000020 Rev 1 M ar. 26, 2010 9 Surface - Mount Ambient Light Sensor ALS -PDIC1 7-77 B/TR8 Recommended method of storage 1. Do not open moisture proof bag before devices are ready to use. 2. Shelf life in sealed bag from the bag seal date : 18 months at 10° C~30° C and < 90% RH. 3. After opening the package, the devices must be stored at 10° C~30° C and ≤ 60%RH, and used within 1 year (floor life). 4. If the moisture absorbent material ( desiccant material) has faded or unopened bag has exceeded the shelf life or devices (out of bag) have exceeded the floor life, baking treatment is required. 5. If baking is required, refer to IPC/JEDEC J-STD-033 for bake procedure or recommend the following conditions: 192 hours at 40° C +5/–0° C and < 5 % RH (reeled/tubed/loose units) or 96 hours at 60° C ± 5° C and < 5 % RH (reeled/tubed/loose units) or 24 hours at 125° C ± 5° C, not suitable for reel or tubes. Recommended Solder Profile Notice: (1) Reflow soldering should not be done more than two times. (2) When soldering, do not put stress on the devices during heating. (3) After soldering, do not warp the circuit board.

Everlight Electronics Co., Ltd. http://www.everlight.com Document No: DLS-0000020 Rev 1 M ar. 26, 2010 10 Surface - Mount Ambient Light Sensor ALS -PDIC1 7-77 B/TR8 Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 ℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Repairing Repair should not be done after the device have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the device will or will not be damaged by repairing.

Everlight Electronics Co., Ltd. http://www.everlight.com Document No: DLS-0000020 Rev 1 M ar. 26, 2010 11 Surface - Mount Ambient Light Sensor ALS -PDIC1 7-77 B/TR8 Packing Quantity Specification

3000 PCS/ 1 Reel

Unit: mm Tolerance: ±0.1mm

Everlight Electronics Co., Ltd. http://www.everlight.com Document No: DLS-0000020 Rev 1 M ar. 26, 2010 12 Surface - Mount Ambient Light Sensor ALS -PDIC1 7-77 B/TR8 Tape Dimensions Progressive direction

Everlight Electronics Co., Ltd. http://www.everlight.com Document No: DLS-0000020 Rev 1 M ar. 26, 2010 13 Surface - Mount Ambient Light Sensor ALS -PDIC1 7-77 B/TR8 Note: 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent.