ALP027XXX SANYO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

  • Diagonal 0.835 cm (0.33 inch) display size.
  • 300 5 225 = 67,500 dots.
  • Transmissive type.
  • Black and white delta arrangement.
  • Polarizer ; None.
  • Low power consumption (panel typ. 7.7 mW) by common inversion drive built-in negative power supply generator and gate level shifter.
  • Up/down and right/left inverse function.
  • Built-in level shifter circuit.
  • Recommended IC ; LV4149W (analog I/F).
  • Recommended temperature (panel surface) ; -10 to +60 ºC.
  • Storage temperature ; -20 to +70 ºC. Specifications Item Specifications unit Remarks Dot count (H) 5 (V) 300 5 225 dot Active area dimensions (H) 5 (V) 6.671 5 4.995 mm Display size (diagonal) 0.835 (0.33 inch) cm Dot pitch (H) 5 (V) 0.0222 5 0.0222 mm Color arrangement Delta - Module external dimensions (W) 5 (H)*1 5 (D) (typ.) 10.6 5 11.3 5 1.4 mm Note1 FPC length (typ.) 28.5 mm Weight About 0.5 g Note1 : Excluding flexible cable and projections. *1 : H = Height. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN ALP027XXX

82003 MH IM

Low-Temperature Polysilicon 0.33-inch TFT LCD Module Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein.

No.7660-2/6 Absolute Maximum Ratings at VSS = 0V Item Symbol Ratings unit H/V driver power supply voltage V DD -1.0 to +10 V V driver negative power supply voltage V BB -6.0 to -1.0 V Common electrode voltage COM -1.0 to +10 V Scan direction signal voltage CSH, CSV -1.0 to +10 V H/V driver/Drain storage circuit input signal STH, XSTH, CKH1, CKH2-1.0 to +10 Vvoltage DSG, XDSG V driver input voltage STV , XSTV , CKV1, CKV2, -1.0 to +10 VENB, XENB Video signal/Drain storage data signal inputV1, V2, V3, DSD -1.0 to +8 Vvoltage Operating temperature Topr -10 to +60 ºC Storage temperature Tstg -20 to +70 ºC Operating Conditions at VSS = 0V Item Symbol min typ max unit Power supply voltage V DD 8.2 8.5 8.8 V V BB output voltage V BB -4.5 (-4.0) -3.5 V Negative Power Supply Generator To stabilize VBB output voltage, VBB should be tied VSS through a zener diode with smoothing capacitor as the following diagram. Capacitance [µF] Rating voltage Capacitance tolerance C1 0.022 16VDC and more +80% and less, -20% and more D1 RD5.1S - B2 or RD5.1UM - B2 (NEC makes) or the corresponding products D1 C1 VBB (No.14) VSS (No.3) ALP027XXX

No.7660-3/6 Input Signal Item Symbol min typ max unit H driver/Drain storage circuit Low VHIL -0.3 0.0 0.3 V input signal voltage High VHIH 2.5 3.0 4.0 V V driver input signal voltage Low VVIL -0.3 0.0 0.3 V High VVIH 2.5 3.0 4.0 V H scan control signal voltage Low VHSIL V SS -V SS+0.2 V High VHSIH V DD -0.2 - V DD V V scan control signal voltage Low VVSIL V SS -V SS+0.2 V High VVSIH V DD -0.2 - V DD V Video signal center level analog I/F VVC 3.30 3.50 3.70 V Black(H) Vblack(H) 5.05 5.25 5.45 V Video signal voltage Black(L) Vblack(L) 1.55 1.75 1.95 V White-Black Vsig w-b - - 2.70 V Common electrode voltage amplitudeanalog I/F VCOM p-p - 3.5 3.6 V Drain storage data signal voltage VDSD VVC-0.2 VVC VVC+0.2 V Power Consumption Item Symbol Condition min typ max unit Panel power consumption I - 0.9 - mA Panel power consumption PWR - 7.7 - mW(NTSC) Optical Specifications at Ta = 25ºC, θ = 0º, SANYO standard measurement system Item Symbol min typ max unit Contrast ratio CR - 100 - - V-T characteristic V90 VT90 - 1.5 - VV10 VT10 - 2.4 - Transmittance T - 6.8 - %

No.7660-4/6 Signal processing IC LV4149W Low-Temperature Polysilicon TFT LCD ALP027XXX Video signal - Y Y Serial control Synchronous signal RGB drivers (S&H) Timing controller VCO Horizontal scanner Display area Vertical scanner BUS I/F Sync. sep. COM Level shifter D-storage circuitPower COM DSD DSD Input Pin Assignmene No. Symbol Function

1 XSTH Inverted signal of STH

2 STH H driver start signal

3V SS V SS for V and H driver

4 CKH1 H driver clock1

5 CKH2 H driver clock2

6V DD VDD for H · V driver

7 CSH Right/left scan control signal (H : Normal scan, L : Reverse scan)

8 V1 Video signal (V1)

9 V2 Video signal (V2)

10 V3 Video signal (V3)

11 DSG Drain storage gate signal

12 XDSG Inverted signal of DSG

13 DSD Drain storage data signal

14 V BB Negative power supply for V driver

15 CSV Up/down scan control signal (H : Normal scan, L : Reverse scan)

16 ENB Enable signal

17 XENB Inverted signal of ENB

18 XSTV Inverted signal of STV

19 STV V driver start signal

20 CKV2 V driver clock2

21 CKV1 V driver clock1

22 COM Common electrode voltage

No.7660-5/6 Package Dimensions Unit : mm 28.5–0.5 –0.3 –0.03 –0.05 –0.1 –0.4 –0.2 –0.14 –0.1 –0.4 –0.5 –0.1 –0.5 –0.05 –0.5 10.6 0 + 0.3 11.3 0 +0.3 4.995 (Display Area) (Polarizer) (4.765) (5.3 0 0.3 (6.535 )0 + 0.3 8.5(BM) Screen Center 0.3 max 2 1.4 (Glass surface) (Thickness of the connector) Note 1. Unsqecifed dimensional tolerance shall be –0.2. 2. For the LCD module positioning, avoid areas near the corners and projections. 3. Please implement the protection for ESD on actual unit. 4. Panel's horizontal slant shonld be 0.06 ‡a--b max 7.5 11.535 ø 0.8 +0.1 0.8+0.1 51.6 0.1 Oval 8.535 7.6 8.82 0.4 (Detail drawing of FPC terminal) A A Model name Lot No. 0.35 -0.03 +0.04 11.5 Pin No.22 Pin No.1 (0.7) A-A a b 6.671 (Display Area) max 0.7 (Shield resin) Shield resin Incident light 027XXX 244A01C (0.5–0.1) (Reinforcing material) 10 (BM) (Polarizer) (Without projection)

No.7660-6/6 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co. , Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of August, 2003. Specifications and information herein are subject to change without notice. PS Contact Information SANYO Electric Co., Ltd Display Company 1-19-10 Ueno, Taito-Ku, Tokyo 110-0005 TEL(81)03-3837-6355 e-mail : poli7901000181@sanyo.co.jp