ALM-1106 AVAGO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
Features
- Advanced GaAs E-pHEMT
- Low Noise: 0.8 dB typ
- High Gain : 14.3 dB typ
- Low component count
- High IIP3 and IP1dB
- Wide Supply Voltage: 1V to 3.6V
- Shutdown current : < 0.1uA
- CMOS compatible shutdown pin (VSD) current @ 2.85V : 90uA
- Adjustable bias current via one single external resistor/voltage
- Small Footprint: 2x2mm
- Low Profile: 1.1mm typ
- Ext matching for non-GPS freq band operation Specifications (25 deg): At 1.575GHz, 2.85V 8mA (Typ)
- Gain = 14.3 dB (Typ)
- NF = 0.8 dB (Typ)
- IIP3 = 4.7 dBm (Typ)
- IP1dB = 1.8 dBm (Typ)
- S11 = -11.8 dB (Typ)
- S22 = -12.4 dB (Typ) Typical performance @ 1.0V supply S21 = 12.3dB NF = 1.0dB Ids = 3.6mA Note: Measurements obtained using demoboard described in Figure 4.
Symbol Parameter and Test Condition Units Min. Typ Max. Table 1. Performance table at nominal operating conditions
ALM-1106 Typical Scattering Parameters at 25°C, V DD = 2.85V, IDS = 8 mA Freq. S11 S21 S12 S22 ALM-1106 Typical Noise Parameters, V DD = 2.85V, IDS = 8mA Freq (GHz) Fmin (dB) Γopt Mag. Γopt Ang. Rn/50 NF @ 50dB
2.00 ± 0.10 2.00 ± 0.10 1.10 ± 0.10 TOPVIEW SIDEVIEW PIN 1 O AY WW (4X) 0.65 0.40 R 0.15 (6X) 0.36 1.66 (6X) 0.10 (6X) 0.43(3X) 0.94 BOTTOM VIEW PIN 1 Package Dimensions Device Orientation USER FEED DIRECTION COVER TAPE CARRIER TAPE REEL Tape Dimensions Notes: 1. Measured from centerline of sprocket hole to centerline of pocket 2. Cumulative tolerance of 10 sprocket holes is ± 0.20 All dimensions in millimeters unless otherwise stated. Existing Thermal Ground to pad clearance = 0.16mm Samsung Thermal Ground to pad min clearance = 0.25mm
SEE DETAIL "x" RECYCLE LOGO ∅178.0 ± 1.0 BACK VIEW EMBOSSED RIBS RAISED: 0.25mm, WIDTH: 1.25mm ∅51.2 ± 0.3 Slot hole 'o' 14.4* MAX FRONT BACK ∅178.0± 1.0 ∅55.0 ± 0.5 60˚ Slot hole 'b' R5.2 R10.65 65˚ 45˚ 7.9 - 10.9** 8.4 +1.5* - 0.0
Part Number No. of Devices Container ALM-1106-TR1 3000 7" Reel ALM-1106-TR2 10000 13" Reel ALM-1106-BLK 100 antistatic bag Part Number Ordering Information For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Pte. in the United States and other countries. Data subject to change. Copyright © 2006 Avago Technologies Pte. All rights reserved. Obsoletes 5989-3889EN AV01-0028EN - February 22, 2006