AGS1000-200-200

AGS1000-200-200 AEROTECH | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 4

Technical content

www.aerotech.com AGS1000 Series Linear Motor Gantries The AGS1000 series of Cartesian gantry systems puts Aerotech’s core technologies and extensive manufacturing capability to work for you, providing outstanding performance and versatility in a wide range of automation platforms. AGS1000 systems are designed for applications including high-speed pick-and-place, automated assembly, vision inspection, dispensing stations, and high-accuracy inspection. The AGS1000 is based on the industry leading AGS10000 gantry, and maintains many of the same leading-edge characteristics. Linear Motor/Linear Encoder Aerotech’s high-performance BLMC series brushless linear servomotors drive the AGS1000 to speeds of 2 m/s and accelerations of 2 g. Feedback is from a rugged noncontact optical linear encoder. Optimized to account for thermal expansion, the design ensures high accuracy under all operating conditions. Rugged Design Since the linear motor is a noncontact device, there is no backlash, wear, or maintenance. The bearings are preloaded linear motion guides with wiper seals and grease fittings and are mounted to provide optimized stiffness and load distribution. Standard lubrication is clean-room compatible. Linear brushless servomotors for superior performance and longevity Customizable Z and q for increased flexibility Optional machine base and risers Optional electroless nickel for ESD protection and medical applications Compact design reduces overall machine size Ideal for die bonding, wire bonding, WLP, DNA profiling, and dispensing Cable Management System Extensive R&D has resulted in an optimized cable management system (CMS) that has been field proven to be the industry’s most reliable design. Large bend radii and high-flex cables ensure that the AGS1000 provides millions of cycles of maintenance-free operation. In the unlikely event of a component failure, a modular design ensures that part replacement is fast and easy. All customer cabling and pneumatics can be routed through the system e-chain. Connectors are provided at the workpiece and at the opposite end of the e-chain, greatly simplifying final machine integration. Turnkey Operation Aerotech’s years of experience manufacturing precision positioning and control systems can be leveraged by acquiring a turnkey system. Typical options include Z-theta mechanisms, risers to accommodate automated parts handling equipment, and machine bases that are designed to accommodate the entire electronics subsystem. Aerotech manufactures a wide range of high-performance amplifiers and advanced motion controllers that are optimized for high-performance automation applications.

www.aerotech.com AGS1000 Series SPECIFICATIONS Basic Model AGS1000-200-200 AGS1000-400-400 AGS1000-500-500 Total Travel(1) 200 mm x 200 mm 400 mm x 400 mm 500 mm x 500 mm Maximum Travel Speed(2) 2 m/s Maximum Linear Acceleration 2 g - 20 m/s2 (no-load) Maximum Load(3) 15 kg Continuous Force(4,5,6) Lower Axis Air Cooling (20 psi) 228 N No Air 146 N Upper Axis Air Cooling (20 psi) 114 N No Air 73 N Peak Force(4,6) Lower Axis 916 N Upper Axis 458 N Accuracy(7) ±5.0 µm Repeatability ±2.0 µm Orthogonality 5 arc sec Nominal System Weight (Gantry only)(8) 47.7 kg 65 kg 73.6 kg Moving Mass(8) Lower Axis 21 kg 25 kg 27 kg Upper Axis 3 kg Material Aluminum Finish Stage(9) Clear Anodize Table Hard Coat Anodize Notes: 1. Custom travel lengths available — contact factory. 4. Depends on configuration. 2. Maximum speed based on stage capability; maximum application velocity may be limited by system data rate and system resolution. 3. Maximum load based on bearing capability; maximum application load may be limited by acceleration requirements. 5. Thermal limitations of positioning stage with respect to performance may limit continuous force output. 6. Force may be limited by amplifier output. 7. Measured at center of travel. 8. Values shown are approximations only and will vary based on customer requirements including, but not limited to, nominal gantry travel, maximum system velocity, quantity and size of customer cables and hoses, and customer payload mass and size. 9. Custom finishes available — contact factory.

www.aerotech.com AGS1000 Series DIMENSIONS TO CUSTOMER WORKPOINT YYY XXX D C GANTRY WORKING AREA SYSTEM ENVELOPE 50 TYP. (MAY VARY PER CUSTOMER APPLICATION) 150 TYP. OPTIONAL RISER HEIGHT (MAY VARY PER CUSTOMER APPLICATION) 450 TYP. GANTRY HEIGHT E A A OPTIONAL LIFTING COMPONENTS INCLUDED WITH SYSTEM B 12X M6X1.0 TAPPED HOLES 100 130 50 80 100 DETAIL A DIMENSIONS: MILLIMETERS NOTES: 1. IN THE TABLE ABOVE, COMMON NOMINAL TRAVEL LENGTHS ARE SHOWN FOR REFERENCE. OTHER NOMINAL TRAVEL LENGTHS AND NOMINAL TRAVEL COMBINATIONS ARE AVAILABLE. 2. "A", "B", "C", AND "D" DIMENSIONAL RANGES ARE SHOWN FOR REFERENCE ONLY AND MAY VARY BASED ON THE CUSTOMER'S APPLICATION. 3. SYSTEM DIMENSIONS WILL VARY BASED ON CUSTOMER REQUIREMENTS INCLUDING, BUT NOT LIMITED TO: - NOMINAL GANTRY TRAVEL - MAXIMUM SYSTEM VELOCITY - REQUIRED CLEARANCE FROM WORK SURFACE - QUANTITY AND SIZE OF CUSTOMER CABLES AND HOSES - CUSTOMER PAYLOAD MASS AND SIZE 4. GANTRY SYSTEM IS EQUIPPED WITH ELECTRICAL AND MECHANICAL TRAVEL LIMITS BEYOND NOMINAL TRAVEL DISTANCE. 5. CONTACT AEROTECH FOR APPLICATION SPECIFIC DIMENSIONS. "XXX" LOWER-AXIS NOMINAL TRAVEL "YYY" UPPER-AXIS NOMINAL TRAVEL "A" GANTRY WIDTH "B" GANTRY DEPTH "C" SYSTEM WIDTH "D" SYSTEM DEPTH "E" GANTRY SPAR SPACING 100 100 500 - 575 330 - 425 850 - 950 625 - 725 315 - 390 300 300 700 - 775 530 - 625 1050 - 1150 825 - 925 515 - 590 500 500 900 - 975 730 - 825 1250 - 1350 1025 - 1125 715 - 790

www.aerotech.com AGS1000 Series ORDERING INFORMATION AGS1000 Direct-Drive Cartesian Gantry System AGS1000-XXX-YYY AGS1000 direct-drive cartesian gantry system, XXX mm lower-axis travel, YYY mm upper-axis travel Feedback (Required) -E1 Lower axis: dual incremental linear encoder, 1 Vpp Upper axis: single incremental linear encoder, 1 Vpp -E2 Lower axis: dual incremental linear encoder, 0.1 µm digital TTL Upper axis: single incremental linear encoder, 0.1 µm digital TTL Lifting (Optional) -LF Lifting hardware provided with system assembly Performance Grade (Required) -PL6 Standard performance - plots for accuracy-only included Integration (Required) Aerotech offers both standard and custom integration services to help you get your system fully operational as quickly as possible. The following standard integration options are available for this system. Please consult Aerotech if you are unsure what level of integration is required, or if you desire custom integration support with your system. -TAS Integration - Test as system Testing, integration, and documentation of a group of components as a complete system that will be used together (ex: drive, controller, and stage). This includes parameter file generation, system tuning, and documentation of the system configuration. -TAC Integration - Test as components Testing and integration of individual items as discrete components that ship together. This is typically used for spare parts, replacement parts, or items that will not be used together. These components may or may not be part of a larger system.