AGM9624A AZDISPLAYS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

PART NUMBER: AGM9624A DATE: AZ DISPLAYS, INC. September 6, 2005

AZ DISPLAYS, INC. General Specification Driving IC S6B0724A Intera ce With Paraller MPU 8080 Ser ies ! Display Specification Display Dot Matrix :96*24 Display Mode:Po sitive/Transflective/FSTN Type Viewing Angle :6:00 Clock Display Duty:1/33 Driving Bias:1/6 Driving Voltage:7.5V Mechanical Characteristics(Unit:mm) Extenal Dimensi on:27.09*17.76*1.7 View Area:24.09*8.26 Dots Size:0.19*0.0.195 Dots Pitch:0.22*0.22

AZ DISPLAYS, INC.SYMBOL RW_WRB 0. 25 1.50 6. 79 12.00 0.50 6. 80 0. 50 3.00 0. 25 13. 50 0. 20 PITCH0. 5* 25=12. 50 12 6 STI FFENR 0. 30 0. 05 Connect Si de FPC MAX 6.00*1.0 17.76 0.2 11.26 0.2 27. 09 0 . 2 24. 09( V. A) 8.26(V.A) 5.26(A.A) 96* 24D OTS 21.0 9 (A. A) MAX1. 70 CHAMFER I C ( S6B0724) ADHESI VET A P E UV TAPE SI LI CON 0. 55*2 5.63 FONT BACK 7 0.22 0.195 0. 19 0.2 2 NO. RS /C S 1 /R E S E_RDB C2 + VSS VDD VOUT C1 - C3 + C1 + C2 - AZ DISPLAYS, INC. AGM9624A

AZ DISPLAYS, INC. Absolute Maximum Ratings Item Symbol Standard Unit Power supply voltage V DD-VSS 0- 5 . 5 Input voltage VIN VSS - VDD V Operating temperature range TA -20 - +70 Storage temperature range T STO -30 - +80 " *Wide temperature range is available Interface Pin Description Pin No Symbol I/O Function 26 CS1B I This is the chip select signal .When CS1B= # L” and CS2= # H”,then the chip select becomes active,and data/command I/O is enabled

25 RESETB I When RESETB is set to “ L” ,the setting are initialized

The RESETB operation is performed by the RESETB signal level 24 RS I Select register. 0:Instruction register (for write) Busy flag &address counter(for read) 1:Data register(for write and read). 23 RW-WRB I Read/write select signal. 22 E-RDB I Operation (data read/write) enable signal.

21 DB0

20 DB1

19 DB2

18 DB3

17 DB4

16 DB5

15 DB6

14 DB7

I/O This is an 8-bit bi-directional data bus that connects to an 8-bit or 16-bit standard MPU data bus. When the serial interface is selected,then D7 serves as the serial data input terminal and D6 serves as the serial clock input t e r m i n a l . A tt h i st i m e , D 0 - D 5a r es e tt oh i g hi m p e d e n c e . When the chip select is inactive,D0 to D7 are set to high impedance.

13 VDD Supply Power supply for logic

12 VSS Supply Ground.

11 VOUT O DC/DC voltage converter output

10 C3+ O Capacitor3+ for internal DC/DC voltage converter

9 C1- O Capacitor1- for internal DC/DC voltage converter

8 C1+ O Capacitor1+ for internal DC/DC voltage converter

7 C2+ O Capacitor2+ for internal DC/DC voltage converter

6 C2- O Capacitor2- for internal DC/DC voltage converter

AZ DISPLAYS, INC. 5V 1 4V 2 3V 3 2V 4 1V 0 Supply LCD driver supply voltages.The voltage determined by LCD cell is impedangce-converted by a resistive driver or an operation amplifier for application .V oltages should be the following relationship: When the on-chip operating power circuit is on,the following are given to V1 to V4 by the on-chip power circuit .V oltage selection is performed by the set LCD bias command. LCD BIAS V1 V2 V3 V4 1/5BIAS 4/5V0 3/5V0 2/5V0 1/5V0 1/6 BIAS 5/6V0 4/6 V0 2/6 V0 1/6 V0 1/7 BIAS 6/7 V0 5/7 V0 2/7 V0 1/7 V0 1/8 BIAS 7/8 V0 6/8 V0 2/8 V0 1/8 V0 1/9 BIAS 8/9 V0 7/9 V0 2/9 V0 1/9 V0

AZ DISPLAYS, INC.

Electrical Characteristics

AZ DISPLAYS, INC. AC Characteristics

AZ DISPLAYS, INC. Application Example