DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Figure 1: Block Diagram AGB3304 50Ω High IP3 Low Noise Wideband Gain Block ADVANCED PRODUCT INFORMATION - Rev 0.0

FEATURES

  • On-chip Active Bias  250-2500 MHz Frequency Range  +39 dBm Output IP3 at 850 MHz  5 dB Noise Figure at 850 MHz  18 dB Gain at 850 MHz  +22 dBm P1dB  SOT-89 Package  Single +5 V Supply  Case Temperature: -40 to +100 °C

APPLICATIONS

 Cellular Base Stations for W-CDMA, CDMA, TDMA, GSM, PCS and CDPD systems  Fixed Wireless  MMDS/WLL  WLAN PRODUCT DESCRIPTION The AGB3304 is one of a series of high performance InGaP HBT amplifiers designed for use in applications requiring high linearity, low noise and low distortion. Active bias circuits on-chip eliminate the need for external resistive feedback. With a high output IP3, low noise figure, and wide band operation, the AGB3304 is ideal for 50 Ω wireless infrastructure applications such as Cellular Base Stations, MMDS, and WLL. Offered in a low cost SOT-89 surface mount package, the AGB3304 requires a single +5 V supply, and typically consumes 0.6 Watts of power. RF Output / Bias RF Input Active Bias

2 ADVANCED PRODUCT INFORMATION - Rev 0.0 AGB3304 2 31 RFIN RFOUTGND GND Figure 2: Pinout (X-ray Top View) Table 1: Pin Description NIP EMAN NOITPIRCSED 1F R NI tupnIFR 2D NGd nuorG 3F R TUO saiB/tuptuOFR 4D NGd nuorG

ADVANCED PRODUCT INFORMATION - Rev 0.0 AGB3304

ELECTRICAL CHARACTERISTICS

Table 2: Absolute Minimum and Maximum Ratings Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. Table 3: Operating Ranges The device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defined in the electrical specifications. RETEMARAP NIM XAM TINU V(egatloVeciveD CC )0 6 +C DV P(rewoPtupnIFR NI )- 0 1+m Bd T(erutarepmeTegarotS GTS )0 4-0 51+C ° erutarepmeTnoitcnuJ- 0 02+C ° RETEMARAP NIM PYT XAM TINU )f(ycneuqerFgnitarepO0 52- 0 052 zHM V(egatloVylppuS YLPPUS )- 5 +- C DV T(erutarepmeTesaC C)0 4-- 0 01+C °

4 ADVANCED PRODUCT INFORMATION - Rev 0.0 AGB3304 5.6 pF 9p F 0.01 µF 10 pF 1.2 pF 4.7 nH 0.01 µF100 pF 100 nH VDC RF OutputRF Input AGB3304 0.5 pF All capacitors are muRata GRM39 series. The 100 nH inductor is a Coilcraft 0603CS series. The 4.7 nH inductor is a Toko LL1608 series. 0.01 µF Table 4: Electrical Specifications (TA = +25 °C, VSUPPLY = +5 VDC, see Application Circuits (2)) Notes: (1) OIP3 is measured with two tones at 1 MHz spacing at 0 dBm output power per tone. (2) Performance as measured on ANADIGICS test fixture, using the appropriate Application Circuit (see Figures 3 through 5). RETEMARAP NIM PYT XAM TINU S(niaG 12 ) zHM058 zHM0591 zHM0412 5.31 Bd Bd Bd 3PItuptuO )1( zHM058 zHM0591 zHM0412 93+ 73+ 73+ mBd mBd mBd )Bd1P(noisserpmoCBd1tuptuO- 2 2+- m Bd erugiFesioN zHM058- 2 .5- B d (ecnatsiseRlamrehT θ CJ )- 4 9- W /C° tnerruCylppuS- 0 21- A m Figure 3: 850 MHz Application Circuit (50 ΩΩΩΩΩ Terminations)

ADVANCED PRODUCT INFORMATION - Rev 0.0 AGB3304 NOTES

ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. IMPORTANT NOTICE ANADIGICS, Inc.

141 Mount Bethel Road

Warren, New Jersey 07059, U.S.A. Tel: +1 (908) 668-5000 Fax: +1 (908) 668-5132 URL: http://www.anadigics.com E-mail: Mktg@anadigics.com ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. ADVANCED PRODUCT INFORMATION - Rev 0.0 AGB3304

ORDERING INFORMATION

NOITPIRCSED GNIGAKCAPTNENOPMOC 1Q42S4033BGAC °001+ot04-e gakcaP98-TOSl eeRdnaepaTeceip000,1