AEM60 XPPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
60 Watts
- CEC 2008 & EISA 2007 Compliant 12 V
- Worldwide Medical Approvals
- 4000 VAC Isolation
- Class II Construction
- Single Outputs from 5 V to 48 V
- High Efficiency
- 3 Year Warranty AEM60 Series Input Input Voltage • 80-264 VAC, derate output power 5% <90 VAC and 10% <85 VAC Input Frequency • 47-63 Hz Input Current • 1.5 A rms max Inrush Current • 80 A max at 240 VAC Input Protection • Fitted with a T2 A/250 VAC fuse in live line No Load Input Power • <0.5 W for ≥12 V output Output Output Voltage • See table Initial Set Accuracy • See table Minimum Load • No mimimum load required Start Up Delay • 3 s max Start Up Rise Time • 3 ms Hold Up Time • 8 ms minimum at 115 VAC Line Regulation • ±1% Load Regulation • See table Transient Response • 5% max deviation recovering to within 1% within 500 µs for 50% load change Ripple & Noise • 1% max, 20 MHz bandwidth (see note 2) Overvoltage Protection• See table Overload Protection • 120-150%, trip & restart (hiccup mode), auto-recovery Short Circuit Protection• Continuous Temperature • ±0.05%/°C Coefficient xppower.com General Efficiency • 85%, see note 5 Isolation • 4000 VAC Input to Output Switching Frequency • 100 kHz typical Power Density • 4.2 W/Inch3 MTBF • 300 kHrs to MIL-HDBK-217F at 25 ˚C, GB Environmental Operating Temperature• 0 °C to +60 °C, derate linearly from 100% load at +40 °C to 50% load at +60 °C Cooling • Convection-cooled Operating Humidity • 15-95% non-condensing Storage Temperature • -20 °C to +85 °C Operating Altitude • 3000 m Vibration • 5-500 Hz at 3 g for 10 mins on each axis Shock • 30 g with 18 ms half sine wave, 3 times on each axis EMC & Safety Emissions • EN55011 Level B conducted & radiated Harmonic Currents • EN61000-3-2, class A Voltage Flicker • EN61000-3-3 ESD Immunity • EN61000-4-2 Level 3, Perf Criteria A Radiated Immunity • EN61000-4-3 Level 2, Perf Criteria A EFT/Burst • EN61000-4-4, Level 3, Perf Criteria A Surge • EN61000-4-5 Level 3, Perf Criteria A Conducted Immunity • EN61000-4-6 Level 3, Perf Criteria A Dips & Interruptions • EN61000-4-11, 30% 10 ms, 60% 100 ms, 100% 5000 ms Perf Criteria A, B, B Safety Approvals • UL60601-1, EN60601-1, IEC60601-1, CE Mark
- Initial set accuracy is set at 60% full load. 2. Add a 0.1 µF ceramic capacitor and a 10 µF electrolytic capacitor to output for ripple and noise measuring at 20 MHz bandwidth. 3. Line regulation is measured from 100 VAC to 240 VAC with full load. 4. Load regulation is measured from 20% to 100% full load (60% ±40% full load). 5. Minimum average of efficiencies measured at 25%, 50%, 75% and 100% load. IEC320-C8 LED 2.28 (58.0) 1.2 (30.5) 0.47 (12.00) Output Voltage Output Current Overvoltage Setpoint Initial Set Accuracy(1) Regulation Model NumberLine(3) Load(4) 5 V 6.00 A 6.45 - 7.14 ± 4% ± 1% ± 6% AEM60US05 12 V 5.00 A 14.3 - 15.8 ± 2% ± 1% ± 5% AEM60US12 15 V 4.00 A 17.1 - 18.9 ± 2% ± 1% ± 3% AEM60US15 18 V 3.33 A 20.9 - 23.1 ± 2% ± 1% ± 2% AEM60US18 19 V 3.15 A 20.9 - 23.1 ± 2% ± 1% ± 2% AEM60US19 24 V 2.50 A 28.5 - 31.5 ± 2% ± 1% ± 2% AEM60US24 36 V 1.66 A 40.9 - 45.2 ± 2% ± 1% ± 2% AEM60US36 48 V 1.25 A 53.2 - 58.8 ± 2% ± 1% ± 2% AEM60US48 For European mains lead order part EU-MAINS-8 For UK mains lead order part: UK-MAINS-8 For US mains lead order part US-MAINS-8 Derating Curves 0 10 20 30 40 50 60 70 100 Ambient Temperature (ºC) Load (%)