DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

 Supply Voltage Range 4.75 V to 30 V  Operation to 800 KHz  CMOS and TTL Compatible Inputs  Support RS422A  High Impedance Buff ered Inputs with hysteresis  Outputs short circuit protected  70 mA peak SINK current  Outputs Protected by Thermal Shut-Down Pin Assignment DIN AIN NC D- VCC BIN GND C IN NC * Pin compatible with 26LS31 in applications which do not require an enable function.

Table 1. Absolute Maximum Ratings Parameters Symbol Min. Max. Units Ref. Table 2. Electrical Characteristics

  1. This is not a test parameter, but for information only.
  2. It may be necessary to clamp the outputs with Schottky diodes when driving extremely long cables with high capacitance between outputs. These

diodes should have a forward voltage of less than 0.4 V, and be connected with cathode to the output and anode to ground. Table 3. AC Switching Characteristics Values given at VCC = 24 V, TA = 25° C, CL = 100 pF on all outputs. TPLH - 150 285 ns See above. TPHL - 170 310 ns See above. Output Rise Time T R - 95 310 ns See above. Output Fall Time T F - 40 165 ns See above.

For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2011 Avago Technologies. All rights reserved. AV02-3023EN - September 7, 2011 Package Drawings (Dimensions in Inches) Notes: 1. Lead coplanarity should be o to 0.004" max. 2. Package surface fi nishing: VD1 24~27 (Dual). 3. All dimension excluding mold fl ashes. 4. The lead width, B to be determined at 0.0075" from the lead tip. Symbol

16 SOIC

A 0.054 0.068 A1 0.004 0.0098 B 0.014 0.019 D 0.386 0.393 E 0.150 0.157 H 0.229 0.244 e 0.050 BSC C 0.0075 0.0098 L 0.016 0.034 X 0.020 REF θ1 0° 8° θ2 7° BSC D X E Be PIN NO. 1 ID MARK CL CL A A1 0.010 SEATING PLANE L DETAIL “A” GAUGE PLANE ±0.004 DETAIL “A” C H

0.015 X 45°