AE514 RFHIC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

(Preliminary) ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ rfsales@rfhic.com ▪ Version 0.2

0 B Product Features 1 B Application

  • Small size
  • Higher Gain
  • Higher linearity
  • SOIC-8 SMD Type package
  • Higher productivity
  • Lower manufacturing cost
  • -70dBc CSO 79 Channels @ +39dBmV/ch
  • -63dBc CTB 79 Channels @ +39dBmV/ch
  • -56dBc XMD 79 Channels @ +39dBmV/ch
  • Low Noise Figure
  • Low Noise Amplifier for CATV , Satellite
  • Cable Modem
  • FTTH (G-PON, GE-PON)
  • Optical node

2 B Description

AE514 is designed as low cost drive amplifiers for many applications including FTTH, CATV System. This MMIC is based on Gallium Arsenide Enhancement Mode pHEMT which shows low current draw and very low noise. The data in this spec sheet is valid only for 75 ohm application. 50 ohm data is in a separate spec sheet.

3 B Specifications

4 B PARAMETER UNIT MIN TYP MAX Condition

Frequency MHz 50 ~ 2150 Gain dB 16 18 Flatness dB 1 Input Return Loss dB -8 -20 Output Return Loss dB -8 -20 Output IP3 dBm 37 40 At 500MHz/10dBm 2tone 1dB Compression Point dBm 22 25 At 500MHz Noise Figure dB 2.5 4 CSO dBc -70 -65 CTB dBc -63 -58 XMOD 30 ~ 870MHz dBc -56 -51 79 channel, +39dBmV/ch CSO dBc -65 -60 CTB dBc -66 -60 XMOD 30 ~ 870MHz dBc -58 -53 135 channel, +37dBmV/ch DC Current mA 205 Vdd = 5.0V Absolute Minimum and Maximum Ratings

5 B PARAMETER UNIT MIN TYP MAX

Device V oltage VDC +5 +5.5 Operating Temperature ℃ -40 +85 Storage Temperature ℃ -40 +150 NOTE 1. Test conditions unless otherwise noted. Test Freq = 500MHz, T=25 , Vdd=℃ 5V , 75Ω system 2. OIP3 measured with 2 tones at an output power of +10dBm/tone separated by 1MHz, Test Freq = 500MHz Package : SOIC-8

(Preliminary) ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ rfsales@rfhic.com ▪ Version 0.2 ◎ Application Circuit: 50MHz ~ 2150MHz, 75ohm System Output D 60465 A (B a l u n ) 100nF 1nF 1nF 100nF 560nH ( Wirewound) +5V AE514 D 60465 A (B a l u n ) 560nH ( Wirewound) 330pF 330pF 680pF 680pF 10nF +5V 0.5pF10nF Input 560 Ω 18pF 560 Ω 18pF ◎ Typical RF Performance: VDD=5V , IDS=205mA, T=25℃, 75ohm System -20 -10 -30 Freq(GHz) Gain(dB) Return Loss(dB) S-Parameter ◎ Multi-Tone Test 79CH_FLAT@Output Power +39dBmV/Ch Level: +39dBmV Tilt: 79CH_FLAT FRQ XMD(NCTA) CTB_RAW CTB_COR N-FLR CSU_RAW CSU_COR CSU_FRQ CSL_RAW CSL_COR CSL_FRQ S21 S11 S22 Noise Figure vs Frequency 10 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 Freq(MHz) NF(dB)

(Preliminary) ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ rfsales@rfhic.com ▪ Version 0.2 ◎ Multi-Tone Test 135CH_FLAT@Output Power +37dBmV/Ch Level: +37dBmV Tilt: 135CH_FLAT FRQ XMD(NCTA) CTB_RAW CTB_COR N-FLR CSU_RAW CSU_COR CSU_FRQ CSL_RAW CSL_COR CSL_FRQ ■ Gate Bias Control Specifications

6 B PARAMETER UNIT MIN TYP MAX Condition

Frequency MHz 50 ~ 2150 Gain dB 16 18 Flatness dB 1 Input Return Loss dB -8 -20 Output Return Loss dB -8 -20 Output IP3 dBm 37 40 At 500MHz/10dBm 2tone 1dB Compression Point dBm 22 25 At 500MHz Noise Figure dB 2.5 4 CSO dBc -67 CTB dBc -69 XMOD 30 ~ 870MHz dBc -61 135 channel, +37dBmV/ch DC Current mA 250 Vdd = 5.0V NOTE 1. Test conditions unless otherwise noted. Test Freq = 500MHz, T=25 , Vdd=℃ 5V , 75Ω system 2. OIP3 measured with 2 tones at an output power of +10dBm/tone separated by 1MHz, Test Freq = 500MHz

(Preliminary) ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ rfsales@rfhic.com ▪ Version 0.2 ◎ Application Circuit: 50MHz ~ 2150MHz, 75ohm System Output D 60465 A (B a l u n ) 100nF 1nF 1nF 100nF 560nH ( Wirewound) +5V AE514 D 60465 A (B a l u n ) 560nH ( Wirewound) 330pF 330pF 680pF 680pF 10nF +5V 0.5pF10nF Input 560 Ω 18pF 560 Ω 18pF 22Kohm 22 kohm ◎ Typical RF Performance: VDD=5V , IDS=250mA, T=25℃, 75ohm System -20 -10 -30 Freq(GHz) Gain(dB) Return Loss(dB) S-Parameter ◎ Multi-Tone Test 135CH_FLAT@Output Power +37dBmV/Ch Level: +37dBmV Tilt: 135CH FRQ XMD(NCTA) CTB_RAW CTB_COR N-FLR CSU_RAW CSU_COR CSU_FRQ CSL_RAW CSL_COR CSL_FRQ S21 S11 S22 Noise Figure vs Frequency 10 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 Freq(MHz) NF(dB)

(Preliminary) ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ rfsales@rfhic.com ▪ Version 0.2

8 B Pin Description

1 RF IN(2)

5 RF OUT(1)

4 RF IN(1)

8 RF OUT(2)

2, 3, 6, 7 N.C Exposed slug GND AMP1 AMP2 RFHIC Corporation (RFHIC) reserves the right to make changes to any products herein or to discontinue any product at any time w ithout notice. RFHIC do not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, inclu ding without limitation consequential or incidental damages. The product specifications herein expressed have been carefully checked and are assumed to be reliable. However, RFHIC disclaims liability for inaccuracies and strongly recommends buyers to verify that the information they are using is current before placing purchase or ders. RFHIC products are not intended for use in life support equipment or application where ma lfunction of the product can be expected to result in persona l injury or death. Buyer uses or sells such products for any such unintended or unauthorized applicatio n, buyer shall indemnify, protect and hold RFHIC and its direct ors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such use. RFHIC’s liability under or arising out of damages, claims of whatsoever kind and nature which RFHIC products could cause shall be limited in amount to the net purchase price of the products sold to buyer by RFHIC.