AE342A RFHIC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Korean Facilities : 82 -31-250-5078 / rfsales@rfhic.com All specifications may change without notice US Facility : 919-677-8780 / sales@rfhicusa.com 1 / 7 V ersion 1.3 Product Features Applications

  • Small size
  • 5MHz ~ 1100MHz (1dB Flat)
  • High gain
  • High linearity
  • Higher productivity
  • Low cost
  • Low Noise Amplifier for CATV , Satellite
  • Cable Modem
  • FTTH (G-PON, GE-PON)
  • Optical node

Description

AE342A is designed as low cost drive amplifiers for many applications including FTTH, CA TV System. This MMIC is based on Gallium Arsenide Enhancement Mode pHEMT which shows low current draw and very low noise. The data in this spec sheet is valid only for 75 ohm application. 50 ohm data is in a separate spec sheet. Electrical Specifications PARAMETER UNIT MIN TYP MAX CONDITION Frequency MHz 5 - 1100 - Gain dB - 16.5 - 5 ~ 200MHz 30 ~ 1000MHz Gain Flatness dB - 1 - 10 ~ 1100MHz Input Return Loss dB - -17 -11 - Output Return Loss dB - -20 -16 - Output IP3 dBm 33 36 - @ 500MHz/5dBm 2tone 1dB Compression Point dBm 18 21 - @ 500MHz Noise Figure dB - 1.7 2.5 5MHz ~ 1000MHz CSO 50 ~ 870MHz dBc - -60 -55 135Channel@30dBmV/Ch CTB dBc - -68 -62 XMOD dBc - -67 -62 DC Current mA - 90 - Vdd = 5.0V Note 1. Test conditions unless otherwise noted. Test Freq = 500MHz, T=25℃, Vdd=5V , 75Ω system 2. OIP3 measured with 2 tones at an output power of + 5dBm/tone separated by 1MHz, Test Freq = 500MHz Absolute Maximum Ratings PARAMETER UNIT MIN TYP MAX Device Voltage V - 5 12 Operating Case Temperature ℃ -40 - 85 Storage Temperature ℃ -40 - 150 ESD Human Body Model - - Class 1A - Moisture sensitivity Level - - MSL1 - Junction temperature ℃ - - 180 Thermal Resistance (Rth) ℃/W - 55 - Package Type : SOT-89

Korean Facilities : 82 -31-250-5078 / rfsales@rfhic.com All specifications may change without notice US Facility : 919-677-8780 / sales@rfhicusa.com 2 / 7 V ersion 1.3 Application Circuit @ 5 ~ 200MHz, 75ohm System PARAMETER UNIT TYPICAL Frequency MHz 5 25 50 100 Gain(S21) dB 16.5 IRL(S11) dB -21 -26 -25 -36 ORL(S22) dB -28 -20 -21 -24 Output IP3 dBm 36.5 37.5 38 38.5 P1dB dBm 17 19 20 20.5 Noise Figure dB 1.7 1.7 1.8 CSO(1) dBc -59 CTB(1) dBc -68 XMOD(1) dBc -60 Current mA 90 Output100 nF Input AE342A 1 nF 1 nF 750ohm 4.7uH 4.7uF ( Tantal) 100 nF +5V 33uH (Wirewound) (1) 8channels, +45dBmV/ch Typical Performance @ VDD=5V, IDS=90mA, T=25℃, 75ohm System 40 80 120 1600 200 -20 -40 Freq(GHz) Return Loss(dB) Gain(dB) S-Parameter Noise Figure vs Frequency 10 50 90 130 170 210 Freq(MHz) NF(dB) P1 vs Frequency 5 40 80 120 160 200 Freq(MHz) P1(dBm) OIP3 vs Frequency 5 40 80 120 160 200 Freq(MHz) P1(dBm) S21 S11 S22

Korean Facilities : 82 -31-250-5078 / rfsales@rfhic.com All specifications may change without notice US Facility : 919-677-8780 / sales@rfhicusa.com 3 / 7 V ersion 1.3 Multi-Tone Test @ 8CH_FLAT@Output Power +45dBmV/Ch Level : +45dBmV Tilt : 135CH_FLAT FRQ XMD (NCTA) CTB RAW CTB COR N-FLR CSU RAW CSU COR CSU FRQ CSL RAW CSL COR CSL FRQ

Korean Facilities : 82 -31-250-5078 / rfsales@rfhic.com All specifications may change without notice US Facility : 919-677-8780 / sales@rfhicusa.com 4 / 7 V ersion 1.3 Application Circuit @ 30 ~ 1000MHz, 75ohm System PARAMETER UNIT TYPICAL Frequency MHz 30 500 1000 Gain(S21) dB 16 IRL(S11) dB -13 -17 -15 ORL(S22) dB -14 -28 -16 Output IP3 dBm 38.5 38 34 P1dB dBm 19.5 21.5 20.5 Noise Figure dB 1.4 1.7 1.8 CSO(1) dBc -60 CTB(1) dBc -68 XMOD(1) dBc -67 Current mA 90 Output 100 nF Input AE342A1.5 pF 51pF 10 nF 8.2nH 560 ohm 8.2 nH 4.7uF ( Tantal) 100 nF +5V 1uH (Wirewound) 75 ohm 0.75 pF0.3pF 2.7nH (1) 135channels, +30dBmV/ch Typical Performance @ VDD=5V , IDS=90mA, T=25℃, 75ohm System -20 -10 -30 Freq(GHz) Return Loss(dB) Gain(dB) S-Parameter Noise Figure vs Frequency 10 200 400 600 800 1000 Freq(MHz) NF(dB) P1 vs Frequency 30 200 400 600 800 1000 Freq(MHz) P1(dBm) OIP3 vs Frequency 30 200 400 600 800 1000 Freq(MHz) OIP3(dBm) S21 S11 S22

Korean Facilities : 82 -31-250-5078 / rfsales@rfhic.com All specifications may change without notice US Facility : 919-677-8780 / sales@rfhicusa.com 5 / 7 V ersion 1.3 Multi-Tone Test : 135CH_FLAT@Output Power +30dBmV/Ch Level: +30dBmV Tilt: 135CH_FLAT FRQ XMD (NCTA) CTB RAW CTB COR N-FLR CSU RAW CSU COR CSU FRQ CSL RAW CSL COR CSL FRQ Multi-Tone Test : 135CH_FLAT@Output Power +20dBmV/Ch Level: +20dBmV Tilt: 135CH_FLAT FRQ XMD (NCTA) CTB RAW CTB COR N-FLR CSU RAW CSU COR CSU FRQ CSL RAW CSL COR CSL FRQ

Korean Facilities : 82 -31-250-5078 / rfsales@rfhic.com All specifications may change without notice US Facility : 919-677-8780 / sales@rfhicusa.com 6 / 7 V ersion 1.3 Package Dimensions (Type: SOT-89) * Unit: mm[inch] | Tolerance ±0.2[.008] ▲ Top View ▲ Side View ▲ Bottom View Pin Description Pin No Function Pin No Function

1 Input 4 GND

2 GND - -

3 Output / Bias - -

Recommended Pattern Recommended Mounting Configuration * Mounting Configuration Notes 1. Ground / thermal via holes are critical for the proper performance of this device. 2. Add as much copper as possible to inner and outer layers near the part to ensure optimal thermal performance. 3. Mounting screws can be added near the part to fasten the board to a heatsink. Ensure that the gro und / thermal via hole region contacts the heatsink. 4. Do not put solder mask on the backside of the PC B in the region where the board contacts the heatsink. 5. RF trace width depends upon the PC B material and construction. 6. Use 1 oz. Copper minimum.

Korean Facilities : 82 -31-250-5078 / rfsales@rfhic.com All specifications may change without notice US Facility : 919-677-8780 / sales@rfhicusa.com 7 / 7 V ersion 1.3

Revision History

Part Number Release Date Version Modification Data Sheet Status AE342A 2014.04.22 1.3 Absolute Maximum Ratings (Delete Tj Typ) - AE342A 201210.15 1.2 New datasheet format - RFHIC Corporation reserves the right to make changes to any products herein or to discontinue any pr oduct at any time without notice. While product specifications have been thoroughly examined for reliability, RFHIC Corporation strongly recommends buyers to verify that the information they are using is accurate before ordering. RFHIC Corporation does not a ssume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, inc luding without limitation consequential or incidental damages. RFHIC products are not intended for use in life support equipment or application where malfunction of the product can be expected to result in personal injury or death. Buyer uses or sells such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold RFHIC Corporation and its directors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such unauthorized use. Sales, inquiries and support should be directed to the local authorized geographic distributor for R FHIC Corporation. For customers in the US, please contact the US Sales Team at 919- 677-8780. For all other inquiries, please contact the International Sales Team at 82-31-250-5078