AE305

AE305 RFHIC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 11

Technical content

Korean Facilities : 82-31-250-5078 / rfsales@rfhic.com All specifications may change without notice US Facility : 919-677-8780 / sales@rfhicusa.com 1 / 11 Version 1.3 0BProduct Features 1BApplications

• 30 ~ 2650MHz
• GaAs E-pHEMT MMIC
• Higher linearity
• Low Noise Figure
• High Max input power
• SOT-89 SMD Type package
• Higher productivity
• Lower manufacturing cost
• Pb Free / RoHS Standard
• Receiver IF Amplifier
• Cellular, GSM, RFID
• Base station
• RF Sub-system
• CA TV , Tetra, Satellite system 2BDescription AE305 is a drive or pre-drive amplifier designed in a low cost SOT-89 package. This MMIC is based on Gallium Arsenide Enhancement Mode pHEMT which shows low current and high IP3. It is designed as driver devices for infrastructure equipment in the 30~2650MHz Wireless technologies such as IF, Cellular, GSM System. The data in this spec sheet is valid only for 50 ohm application. Electrical Specifications 3BPARAMETER UNIT MIN TYP MAX TYP REMARK Operating Frequency(fo) MHz 30 - 2650 - - Small Signal Gain(S21) dB - 14.5 13.5 - 14 30~1000MHz 30~2650MHz Input Return Loss(S11) dB - -13 - -11 - Output Return Loss(S22) dB - -14 - -12 - Output IP3(OIP3) dBm 35 38 - 30 - 1dB Compression Point(P1dB) dBm 20 22 - 17 - Noise Figure(NF) dB - 2.5 - 2.6 - DC Current mA - 110 - 48 - Supply Voltage V - 5 - 3.3 - Note 1. Test conditions unless otherwise noted. Freq=500MHz, Vdd=+5V, T=25℃, 50Ω system 2. OIP3 measured with 2 tones at an output power of + 5dBm/tone separated by 1MHz Absolute Maximum Ratings PARAMETER UNIT MIN TYP MAX REMARK Device Voltage V - 5 7 - Operating Case Temperature ℃ -40 - 85 - Storage Temperature ℃ -40 - 150 - ESD Human Body Model - - Class 1A - - Moisture Sensitivity Level - - MSL1 - - Junction Temperature (Tj) ℃ - - 180 @ quiescent current, No RF, Tc = 85℃ Thermal Resistance (Rth) ℃/W - 70 - Package Type : SOT-89

Korean Facilities : 82-31-250-5078 / rfsales@rfhic.com All specifications may change without notice US Facility : 919-677-8780 / sales@rfhicusa.com 2 / 11 Version 1.3 Application Circuit @ 30 ~ 1000MHz, 50ohm System EVB BOM Description Reference Designator Manufacturer Manufacturer's P/N CAP, 150pF, 1608 L4 Murata GRM1885C1H151JA01D CAP, 300pF, 1608 L2 Murata GRM1885C1H301JA01D CAP, 100nF, 1608 C8 Murata GRM188R71C104KA01D CAP, 4.7uF, 3216-18 C9 AVX TAJA475M016RNJ IND, 470nH, ±10%, 2520, W/W L3 Taiyo Yuden LEM2520TR47K RES, 0Ohm, 1608 C1, C6, Rbias ROHM MCR03 EZPJ000 DNP L1, C2, C3, C4, C5, C7 - - Typical Performance 5BPARAMETER UNIT TYPICAL Operational Frequency Range MHz 50 500 1000 Small Signal Gain(S21) dB 14.5 Input Return Loss(S11) dB -8 -17 -15 Output Return Loss(S22) dB -12 -25 -18 Output IP3(OIP3) dBm 38 38.5 35 1dB Compression Point(P1dB) dBm 20 22 21 Noise Figure(NF) dB 2.4 2.5 2.8 Note 1. Test conditions unless otherwise noted. Freq=30~1000MHz, Vdd=+5V, T=25℃, 50Ω system 2. OIP3 measured with 2 tones at an output power of + 5dBm/tone separated by 1MHz 6BRecommended Bias Resistor Values Vsupply Rbias(5V) Rbias(4.5V) Rbias(4V) 5V 0Ω 5.6Ω 12Ω Current 110mA 92mA 75mA C3 C5 L4 C6 Rbias C8 C9 L1 C4 C7

Korean Facilities : 82-31-250-5078 / rfsales@rfhic.com All specifications may change without notice US Facility : 919-677-8780 / sales@rfhicusa.com 3 / 11 Version 1.3 Typical Performance @ V oltage = 5V , T=25℃, 50ohm System (Rbias) Gain vs Frequency 30 600 1200 1800 2400 3000 Freq(MHz) Gain(dB) Rbias=0Ω Rbias=5.6Ω Rbias=12Ω Input R/L vs Frequency -20 -15 -10 30 600 1200 1800 2400 3000 Freq(MHz) S11(dB) Rbias=0Ω Rbias=5.6Ω Rbias=12Ω Output R/L vs Frequency -40 -30 -20 -10 30 600 1200 1800 2400 3000 Freq(MHz) S22(dB) Rbias=0Ω Rbias=5.6Ω Rbias=12Ω Noise Figure vs Frequency 30 600 1200 1800 2400 3000 Freq(MHz) NF(dB) Rbias=0Ω Rbias=5.6Ω Rbias=12Ω OIP3 vs Frequency 30 200 400 600 800 1000 Freq(MHz) OIP3(dBm) Rbias=0Ω Rbias=5.6Ω Rbias=12Ω P1dB vs Frequency 30 200 400 600 800 1000 Freq(MHz) P1dB(dBm) Rbias=0Ω Rbias=5.6Ω Rbias=12Ω

Korean Facilities : 82-31-250-5078 / rfsales@rfhic.com All specifications may change without notice US Facility : 919-677-8780 / sales@rfhicusa.com 4 / 11 Version 1.3 Typical Performance @ V oltage = 5V(110mA) & 3.3V(48mA), T=25℃, 50ohm System Gain vs Frequency 30 600 1200 1800 2400 3000 Freq(MHz) Gain(dB) 3.3V Input R/L vs Frequency -20 -15 -10 30 600 1200 1800 2400 3000 Freq(MHz) S11(dB) 3.3V Output R/L vs Frequency -40 -30 -20 -10 30 600 1200 1800 2400 3000 Freq(MHz) S22(dB) 3.3V Noise Figure vs Frequency 30 600 1200 1800 2400 3000 Freq(MHz) NF(dB) 3.3V OIP3 vs Frequency 50 200 400 600 800 1000 Freq(MHz) OIP3(dBm) 5V, Pout=5dBm 3.3V, Pout = 0dBm P1dB vs Frequency 50 200 400 600 800 1000 Freq(MHz) P1dB(dBm) 3.3V

Korean Facilities : 82-31-250-5078 / rfsales@rfhic.com All specifications may change without notice US Facility : 919-677-8780 / sales@rfhicusa.com 5 / 11 Version 1.3 Typical Performance @ V oltage = 5V , 50ohm System(Temperature) Gain vs Frequency 30 600 1200 1800 2400 3000 Freq(MHz) Gain(dB) 85°C 25°C - 40°C Input R/L vs Frequency -20 -15 -10 30 600 1200 1800 2400 3000 Freq(MHz) S11(dB) 85°C 25°C - 40°C Output R/L vs Frequency -40 -30 -20 -10 30 600 1200 1800 2400 3000 Freq(MHz) S22(dB) 85°C 25°C - 40°C Noise Figure vs Frequency 30 600 1200 1800 2400 3000 Freq(MHz) NF(dB) 85°C 25°C - 40°C OIP3 vs Frequency 30 200 400 600 800 1000 Freq(MHz) OIP3(dBm) 85°C 25°C - 40°C P1dB vs Frequency 30 200 400 600 800 1000 Freq(MHz) P1dB(dBm) 85°C 25°C - 40°C

Korean Facilities : 82-31-250-5078 / rfsales@rfhic.com All specifications may change without notice US Facility : 919-677-8780 / sales@rfhicusa.com 6 / 11 Version 1.3 Application Circuit @ 30 ~ 2650MHz, 50ohm System Input AE305 Output +5V 300pF 150pF 4.7uF (Tantal) 100nF 0.5pF 1.8nH 0.5pF 470nH Rbias EVB BOM Description Reference Designator Manufacturer Manufacturer's P/N CAP, 0.5pF, 1608 C2, C7 Murata GRM1885C1HR50CZ01D CAP, 150pF, 1608 L4 Murata GRM1885C1H151JA01D CAP, 300pF, 1608 C1 Murata GRM1885C1H301JA01D CAP, 100nF, 1608 C8 Murata GRM188R71C104KA01D CAP, 4.7uF, 3216-18 C9 AVX TAJA475M016RNJ IND, 1.8nH, 1608 L2 Taiyo Yuden HK1608 1N8S IND, 470nH, ±10%, 2520, W/W L3 Taiyo Yuden LEM2520TR47K RES, 0Ohm, 1608 C6, Rbias ROHM MCR03 EZPJ000 DNP L1, C3, C4, C5 - - Typical Performance 7BPARAMETER UNIT TYPICAL Operational Frequency Range MHz 50 1000 2000 2650 Small Signal Gain(S21) dB 13.5 Input Return Loss(S11) dB -8 -13 -17 -13 Output Return Loss(S22) dB -13 -14 -10 -8 Output IP3(OIP3) dBm 38.5 35.5 34.5 29.5 1dB Compression Point(P1dB) dBm 20 22 21.5 17 Noise Figure(NF) dB 2.5 2.8 3.3 4 Note 1. Test conditions unless otherwise noted. Freq=30~2650MHz, Vdd=+5V, T=25℃, 50Ω system 2. OIP3 measured with 2 tones at an output power of + 5dBm/tone separated by 1MHz Recommended Bias Resistor Values Vsupply Rbias(5V) Rbias(4.5V) Rbias(4V) 5V 0Ω 5.6Ω 12Ω Current 110mA 92mA 75mA C3 C5 L4 C6 Rbias C8 C9 L1 C4 C7

Korean Facilities : 82-31-250-5078 / rfsales@rfhic.com All specifications may change without notice US Facility : 919-677-8780 / sales@rfhicusa.com 7 / 11 Version 1.3 Typical Performance @ V oltage = 5V , T=25℃, 50ohm System (Rbias) Gain vs Frequency 30 600 1200 1800 2400 3000 Freq(MHz) Gain(dB) Rbias=0Ω Rbias=5.6Ω Rbias=12Ω Input R/L vs Frequency -20 -15 -10 30 600 1200 1800 2400 3000 Freq(MHz) S11(dB) Rbias=0Ω Rbias=5.6Ω Rbias=12Ω Output R/L vs Frequency -40 -30 -20 -10 30 600 1200 1800 2400 3000 Freq(MHz) S22(dB) Rbias=0Ω Rbias=5.6Ω Rbias=12Ω Noise Figure vs Frequency 30 600 1200 1800 2400 3000 Freq(MHz) NF(dB) Rbias=0Ω Rbias=5.6Ω Rbias=12Ω OIP3 vs Frequency 30 600 1200 1800 2400 3000 Freq(MHz) OIP3(dBm) Rbias=0Ω Rbias=5.6Ω Rbias=12Ω P1dB vs Frequency 30 600 1200 1800 2400 Freq(MHz) P1dB(dBm) Rbias=0Ω Rbias=5.6Ω Rbias=12Ω

Korean Facilities : 82-31-250-5078 / rfsales@rfhic.com All specifications may change without notice US Facility : 919-677-8780 / sales@rfhicusa.com 8 / 11 Version 1.3 Typical Performance @ V oltage = 5V(110mA) & 3.3V(48mA), T=25℃, 50ohm System Gain vs Frequency 30 600 1200 1800 2400 3000 Freq(MHz) Gain(dB) 3.3V Input R/L vs Frequency -25 -20 -15 -10 30 600 1200 1800 2400 3000 Freq(MHz) S11(dB) 3.3V Output R/L vs Frequency -40 -30 -20 -10 30 600 1200 1800 2400 3000 Freq(MHz) S22(dB) 3.3V Noise Figure vs Frequency 30 600 1200 1800 2400 3000 Freq(MHz) NF(dB) 3.3V OIP3 vs Frequency 30 600 1200 1800 2400 3000 Freq(MHz) OIP3(dBm) 5V, Pout=5dBm 3.3V, Pout = 0dBm P1dB vs Frequency 30 600 1200 1800 2400 Freq(MHz) P1dB(dBm) 3.3V

Korean Facilities : 82-31-250-5078 / rfsales@rfhic.com All specifications may change without notice US Facility : 919-677-8780 / sales@rfhicusa.com 9 / 11 Version 1.3 Typical Performance @ V oltage = 5V , 50ohm System (Temperature) Gain vs Frequency 30 600 1200 1800 2400 3000 Freq(MHz) Gain(dB) 85°C 25°C - 40°C Input R/L vs Frequency -20 -15 -10 30 600 1200 1800 2400 3000 Freq(MHz) S11(dB) 85°C 25°C - 40°C Output R/L vs Frequency -40 -30 -20 -10 30 600 1200 1800 2400 3000 Freq(MHz) S22(dB) 85°C 25°C - 40°C Noise Figure vs Frequency 30 600 1200 1800 2400 3000 Freq(MHz) NF(dB) 85°C 25°C - 40°C OIP3 vs Frequency 30 900 1800 2700 Freq(MHz) OIP3(dBm) 85°C 25°C - 40°C P1dB vs Frequency 30 900 1800 2700 Freq(MHz) P1dB(dBm) 85°C 25°C - 40°C

Korean Facilities : 82-31-250-5078 / rfsales@rfhic.com All specifications may change without notice US Facility : 919-677-8780 / sales@rfhicusa.com 10 / 11 Version 1.3 Package Dimensions (Type: SOT-89) * Unit: mm[inch] | Tolerance ±0.2[.008] ▲ Top View ▲ Side View ▲ Bottom View 8BPin Description Pin No Function Pin No Function

1 Input 4 GND

2 GND -

3 Output / Bias -

Recommended Pattern Recommended Mounting Configuration 9B* Mounting Configuration Notes 1. Ground / thermal via holes are critical for the proper performance of this device. 2. Add as much copper as possible to inner and outer layers near the part to ensure optimal thermal performance. 3. Mounting screws can be added near the part to fasten the board to a heatsink. Ensure that the ground / therma l via hole region contacts the heatsink. 4. Do not put solder mask on the backside of the PC B in the region where the board contacts the heatsink. 5. RF trace width depends upon the PCB material and construction. 6. Use 1 oz. Copper minimum.

Korean Facilities : 82-31-250-5078 / rfsales@rfhic.com All specifications may change without notice US Facility : 919-677-8780 / sales@rfhicusa.com 11 / 11 Version 1.3

Revision History

Part Number Release Date Version Modification Data Sheet Status AE305 2014.4.11 1.3 Revision : Absolute Maximum Ratings - AE305 2012.10.17 1.2 New datasheet format - AE305 2012.5.8 1.1 Added test data of application of 3.3V supply voltage - AE305 2012.3.2 1.0 Initial Release. - RFHIC Corporation reserves the right to make changes to any products herein or to discontinue any pr oduct at any time without notice. While product specifications have been thoroughly examined for reliability, RFHIC Corporation strongly recommends buyers to verify that the information they are using is accurate before ordering. RFHIC Corporation does not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, inc luding without limitation consequential or incidental damages. RFHIC products are not intended for use in life support equipment or application wher e malfunction of the product can be expected to result in personal injury or death. Buyer uses or sells such products for any such unintended or unauthorized application, buyer shall indemnify, prot ect and hold RFHIC Corporation and its directors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such unauthorized use. Sales, inquiries and support should be directed to the local authorized geographic distributor for R FHIC Corporation. For customers in the US, please contact the US Sales Team at 919- 677-8780. For all other inquiries, please contact the International Sales Team at 82-31-250-5078