ADW PANASONIC | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 8
Technical content
–1– ASCTB8E 201603-T
ORDERING INFORMATION
1 Form A 8A/16A,
Relays (latching type) DW RELAYS (ADW1) Protective construction: Flux-resistant type Reflow compatible type (Standard type) IEC60335-1 compliant type (Standard & Inrush type) Low profile type (Inrush type) RoHS compliant
FEATURES
- Low profile type available (h = 15.8 mm .622 inch) 2. Inrush type available (TV-8 UL/C-UL approved) 3. IEC60335-1* compliant type available (PTI 325V VDE approved) 4. Reflow possible (pin-in-paste) 5. Certified by UL/C-UL, VDE * Common safety standard for major electrical appliance TYPICAL APPLICATIONS 1. Lighting control equipment 2. Smart meters 3. Industrial equipment 4. Security equipment 5. Home appliances 6. Various power supplies New ADW 1 W Operating function 1: 1 coil latching type 2: 2 coil latching type Nominal coil voltage (DC) 03: 3V, 05: 5V, 06: 6V, 09: 9V, 12: 12V, 24: 24V Type classification Nil: Reflow compatible type Low profile type IEC60335-1 compliant type Contact capacity Nil: Standard type (8A) Inrush type (16A, Inrush current 100A) Contact arrangement 1: 1 Form A Notes: 1. “L” and “T” type are non-compliant reflow soldering. Low profile type is available (inrush type only). The suffix “W” on the part number is only displayed on the inner and outer packaging. It is not displayed on the relay.
DW (ADW1) –2– ASCTB8E 201603-T TYPES 1. Standard type (8A) (Reflow compatible type) Standard packing: Carton: 100 pcs.; Case: 500 pcs. Note: Carton packing is standard. Tube packing type is also available. Please consult us for details. 2. Standard type (8A) (IEC60335-1 compliant type) Standard packing: Carton: 100 pcs.; Case: 500 pcs. Note: Carton packing is standard. Tube packing type is also available. Please consult us for details. 3. Inrush type (16A, Inrush current 100A · IEC60335-1 compliant type)*1, *2 Standard packing: 100 pcs.; Case: 500 pcs. Notes: *1. Carton packing is standard. Tube packing type is also available. Please contact us for details. *2. Please contact us for the reflow compatible type of inrush type (16A, Inrush current 100A · IEC60335-1 compliant type). 4. Inrush type (16A, Inrush current 100A · Low profile type) Standard packing: 100 pcs.; Case: 500 pcs. Contact arrangement Nominal coil voltage Part No. 1 coil latching type 2 coil latching type
1 Form A
Contact arrangement Nominal coil voltage Part No. 1 coil latching type 2 coil latching type 12V DC ADW1112TW ADW1212TW 24V DC ADW1124TW ADW1224TW Contact arrangement Nominal coil voltage Part No. 1 coil latching type 2 coil latching type 3V DC ADW1103HTW ADW1203HTW 5V DC ADW1105HTW ADW1205HTW 6V DC ADW1106HTW ADW1206HTW 9V DC ADW1109HTW ADW1209HTW 12V DC ADW1112HTW ADW1212HTW 24V DC ADW1124HTW ADW1224HTW Contact arrangement Nominal coil voltage Part No. 1 coil latching type 2 coil latching type 3V DC ADW1103HLW ADW1203HLW 5V DC ADW1105HLW ADW1205HLW 6V DC ADW1106HLW ADW1206HLW 9V DC ADW1109HLW ADW1209HLW 12V DC ADW1112HLW ADW1212HLW 24V DC ADW1124HLW ADW1224HLW
DW (ADW1) –3– ASCTB8E 201603-T RATING 1. Coil data 1) 1 coil latching type 2) 2 coil latching type *Square, pulse drive 2. Specifications Notes: *1. Minimum switching load is a guide to the lower current limit of switching under the micro-load. This parameter is changed by the condition, such as switching times, environment condition, and expected reliability. Therefore, Panasonic Corporation cannot assure the reliability. When the relay is used lower than minimum switching load, reliability is attrition. Please use the relay over minimum switching load. *2. Wave is standard shock voltage of ±1.2×50μs according to JEC-212-1981 *3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage conditions in NOTES. *4. Allowable range when in original packaging is –40 °C to +70°C –40°F to +158°F. Nominal coil voltage Set voltage (at 20°C 68°F) Reset voltage (at 20°C 68°F) Nominal operating current Coil resistance Nominal operating power Max. applied voltage (at 20°C 68°F) 3V DC *80%V or less of nominal voltage (Initial) *80%V or less of nominal voltage (Initial) 66.7mA 45 Ω 200mW 110%V of nominal voltage 5V DC 40.0mA 125 Ω 6V DC 33.3mA 180 Ω 9V DC 22.2mA 405 Ω 12V DC 16.7mA 720 Ω 24V DC 8.3mA 2,880 Ω Nominal coil voltage Set voltage (at 20°C 68°F) Reset voltage (at 20°C 68°F) Nominal operating current Coil resistance Nominal operating power Max. applied voltage (at 20°C 68°F) Set coil Reset coil Set coil Reset coil Set coil Reset coil 3V DC *80%V or less of nominal voltage (Initial) *80%V or less of nominal voltage (Initial) 133.3mA 133.3mA 22.5 Ω 22.5Ω 400mW 400mW 110%V of nominal voltage 5V DC 80.0mA 80.0mA 62.5 Ω 62.5Ω 6V DC 66.7mA 66.7mA 90 Ω 90 Ω 9V DC 44.4mA 44.4mA 202.5 Ω 202.5Ω 12V DC 33.3mA 33.3mA 360 Ω 360 Ω 24V DC 16.7mA 16.7mA 1,440 Ω 1,440 Ω Characteristics Item Specifications Standard type Inrush type Contact Arrangement 1 Form A Contact resistance (Initial) Max. 100 m Ω (By voltage drop 6 V DC 1A) Contact material AgSnO2 type Rating Nominal switching capacity (resistive load) 8A 250V AC 16A 277V AC Max. switching power (resistive load) 2,000VA 4,432VA Max. switching voltage 250V AC 277V AC Max. switching current 8A AC 16A AC Nominal operating power 200mW (1 coil latching type), 400mW (2 coil latching type) Min. switching capacity (Reference value)*1 100mA 5 V DC Electrical characteristics Insulation resistance (Initial) Min. 1,000M Ω (at 500V DC, Measurement at same location as “Breakdown voltage” section) Breakdown voltage (Initial) Between open contacts 1,000 Vrms for 1min. (Detection current: 10mA) Between contact and coil 5,000 Vrms for 1min. (Detection current: 10mA) Surge breakdown voltage*2 (Between contact and coil) 12,000 V (Initial) Set time (at 20°C 68°F) (Initial) Max. 15 ms (Nominal voltage applied to the coil, excluding contact bounce time) Reset time (at 20°C 68°F) (Initial) Max. 15 ms (Nominal voltage applied to the coil, excluding contact bounce time) Mechanical characteristics Shock resistance Functional 100 m/s 2 (Half-wave pulse of sine wave: 11 ms; detection time: 10μs) Destructive 1,000 m/s 2 (Half-wave pulse of sine wave: 6 ms) Vibration resistance Functional 10 to 55 Hz at double amplitude of 2 mm (Detection time: 10 μs) Destructive 10 to 55 Hz at double amplitude of 3 mm Expected life Mechanical Min. 106 (at 180 times/min.) Electrical Resistive load Min. 5 × 104 (at 8A 250V AC, at 20 times/min.) Min. 105 (at 5A 250V AC, at 20 times/min.) (IEC60335-1 type only) Min. 2 × 104 (at 16A 277V AC, ON:OFF = 1s:5s) Min. 5 × 104 (at 8A 250V AC, at 20 times/min.) Inrush current — Min. 2.5 × 104 [Inrush 100A 600W (120V AC) Tungsten] Cycle rate ON:OFF = 1s:59s Conditions Conditions for operation, transport and storage* 3 *4 Temperature: –40°C to +85°C –40°F to +185°F Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) Temperature: –40°C to +85°C –40°F to +185°F (8A or less), –40°C to +70°C –40°F to +158°F (Over 8A to 16A) Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
DW (ADW1) –4– ASCTB8E 201603-T REFERENCE DATA ■ Standard type and Inrush type 1. Max. switching capacity (AC resistive load) ■ Standard type 1. Set time (1 coil latching type) Tested sample: ADW1106, 15 pcs Ambient temperature: 28°C 82.4°F Contact load: 5V DC, 10mA 2. Reset time (1 coil latching type) Tested sample: ADW1106, 15 pcs Ambient temperature: 28°C 82.4°F Contact load: 5V DC, 10mA 10001 100 1 10 100 250 Contact voltage, V Inrush type Standard type Contact current, A Max. Min. 130120110100908070 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0.0 Coil applied voltage, %V Set time, ms Max. Min. 130120110100908070 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0.0 Coil applied voltage, %V Reset time, ms 3. Ambient temperature characteristics Tested sample: ADW1106, 6pcs Ambient temperature: –40°C to +85°C –40°F to +185°F ■ Inrush type 1. Set time (1 coil latching type) Tested sample: ADW1112HL, 30 pcs Ambient temperature: 28°C 82.4°F Contact load: 5V DC, 10mA 2. Reset time (1 coil latching type) Tested sample: ADW1112HL, 30 pcs Ambient temperature: 28°C 82.4°F Contact load: 5V DC, 10mA Ave. Ave. 100 -60 -40 -20 0 80604020 Reset voltage Set voltage -30 -20 -10 Change rate to nominal voltage, %V Ambient temperature, °C 130 140 150 160120110100908070 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0.0 Coil applied voltage, %V Set time, ms Max. Min. 130 140 150 160120110100908070 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0.0 Coil applied voltage, %V Max. Min. Reset time, ms 3. Set time (2 coil latching type) Tested sample: ADW1212HL, 30 pcs Ambient temperature: 28°C 82.4°F Contact load: 5V DC, 10mA 4. Reset time (2 coil latching type) Tested sample: ADW1212HL, 30 pcs Ambient temperature: 28°C 82.4°F Contact load: 5V DC, 10mA 5. Ambient temperature characteristics Tested sample: ADW1105HL, 6pcs Ambient temperature: –40°C to +85°C –40°F to +185°F 130 140 150 160120110100908070 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0.0 Coil applied voltage, %V Set time, ms Max. Min. 130 140 150 160120110100908070 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0.0 Coil applied voltage, %V Max. Min. Reset time, ms Ave. Ave. 100 -60 -40 -20 0 80604020 Set voltage -30 -20 -10 Change rate to nominal voltage, %V Ambient temperature, °C Reset voltage
DW (ADW1) –5– ASCTB8E 201603-T DIMENSIONS (mm inch) 1. Standard height type 2. Low profile type SAFETY STANDARDS Notes: 1. CSA standards: Certified by C-UL 2. CQC standard: Application pending, Please contact us. Item UL/C-UL (Recognized) VDE (Recognized) TV rating (UL/C-UL) File No. Contact rating File No. Contact rating File No. Contact rating Standard type (8A) E43149 8A 250V AC R 85 °C 185°F 5×104 5A 30V DC R 85°C 185°F 5×104 40032254 8A 250V AC (cos φ=1.0) 85°C 185°F 5×104 5A 30V DC (0ms) 85°C 185°F 5×104 —— Inrush type (16A) E43149 16A 277V AC R 60 °C 140°F 5×104 8A 250V AC R 85°C 185°F 5×104 5A 30V DC R 85°C 185°F 5×104 1200W Standard ballast 277V AC 50°C 122°F 6×103 1200W Tungsten, 240V AC 50°C 122°F 6×103 600W Tungsten, 120V AC 50°C 122°F 2.5×104 5A 347V AC R 85°C 185°F (UL standards only) 5×104 40032254 16A 277V AC (cos φ=1.0) 70°C 158°F 5×104 8A 250V AC (cosφ=1.0) 85°C 185°F 5×104 5A 30V DC (0ms) 85°C 185°F 5×104 E43149 TV-8 rating 240V AC 40°C 104°F 2.5×104 The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/ External dimensions 10.00 .394 24.00 .945 18.80 .740 3.20 .126 0.27 .011 0.20 .008 7.50 .2953.50 .138 0.80 .031 17.50 .689 1.50 .059 0.40 dia. .016 dia. 0.80 .031 0.70 .028 2 coil latching type only General tolerance: ±0.3 ±.012 PC board pattern (Bottom view) Tolerance: ±0.1 ±.004 Schematic (Bottom view) 3.50 .138 17.50 .689 7.50 .295 4 or 5-1.20 dia. hole 4 or 5-.047 dia. hole 2 coil latching type only (Reset condition)(Reset condition) 2 coil latching type1 coil latching type CAD Data External dimensions 10.00 .394 24.00 .945 15.80 .622 +0.20 −0.30 +.008 −.012 3.20 .126 0.27 .0110.20 .008 7.50 .295 3.50 .138 0.80 .031 17.50 .689 1.50 .059 0.40 dia. .016 dia. 0.80 .031 0.25 .010 2 coil latching type only General tolerance: ±0.3 ±.012 PC board pattern (Bottom view) Tolerance: ±0.1 ±.004 Schematic (Bottom view) 3.50 .138 17.50 .689 7.50 .295 4 or 5-1.20 dia. hole 4 or 5-.047 dia. hole 2 coil latching type only (Reset condition)(Reset condition) 2 coil latching type1 coil latching type CAD Data
DW (ADW1) –6– ASCTB8E 201603-T NOTES 1. For cautions for use, please read “GENERAL APPLICATION GUIDELINES”. 2. Solder and cleaning conditions 1) Flow solder mounting conditions Please obey the following conditions when soldering automatically. (1) Preheating: within 120°C 248°F (solder surface terminal portion) and within 120 seconds (2) Soldering iron: 260°C±5°C 500°F±41°F (solder temperature) and within 6 seconds (soldering time) *Furthermore, because the type of PC board used and other factors may influence the relays, test that the relays function properly on the actual PC board on which they are mounted. 2) Reflow solder mounting (Pin-in- Paste mounting) conditions
- Cautions to observe when mounting temperature increases in the relay are greatly dependent on the way different parts are located a PC board and the heating method of the reflow device. Therefore, please conduct testing on the actual device beforehand after making sure the parts soldered on the relay terminals and the top of the relay case are within the temperature conditions given above. 3) Since this is not a sealed type relay, do not clean it as is. Also, be careful not to allow flux to overflow above the PC board or enter the inside of the relay. 3. Max. applied voltage It is not allowed to apply the continuous maximum voltage to the coil. In order to obtain the specified performance, please apply nominal coil voltage. 4. Set/reset pulse time of latching type relay Regarding the set/reset pulse time of the latching type relay, it is recommended to apply nominal coil voltage for minimum 30ms pulse across the coil to secure the sure operation considering the ambient temperature and condition change through service life. t1 t2 T1 = 150 to 180°C T2 = 230°C T3 = 250°C t1 = 60 to 120 seconds t2 = within 30 seconds 302 to 356°F 446°F or more 482°F or less
DW (ADW1) –7– ASCTB8E 201603-T
DW (ADW1) –8– ASCTB8E 201603-T