ADT16C60G ADV | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 6

Technical content

Features

Repetitive Peak Off◆ -State Voltage: 600Vand800V R.M.S On◆ -State Current ( IT(RMS)=16A ) ◆ High Commutation dv/dt ◆ These Devices are Pb-Free and are RoHS Compliant Absolute Maximum Ratings Scan the QR code to view the latest product information ADV

2 / 6 www.advsemi.com Feb,2013 -Rev.3.02 ADV Electrical Characteristics( Tj = 25°C unless otherwise specified ) Symbol Items Conditions ADT16C60G/80G Unit T S Blank B IDRM IRRM Peak Forward Reverse Blocking Current VDRM = VRRM, Tj = 25°C Max. 5 uA VDRM = VRRM, Tj = 125°C 2 mA VTM Peak On-State Voltage I TM = 22.5A, tp = 380 μs Max. 1.55 V VGD Q1-Q2-Q3 Non−Trigger Gate Voltage VD = VDRM R L = 3.3 kΩ Tj = 125°C Min. 0.2 V VGT Q1-Q2-Q3 Gate Trigger Voltage VD = 12V ，RL = 33Ω Max. 1.3 V IGT Q1-Q2-Q3 Gate Trigger Current Max. 5 10 35 50 mA IH Q1-Q2-Q3 Holding Current I T = 0.1A Max. 10 15 40 60 mA IL Q1-Q3 Latching Current I G = 1.2 IGT Max. 15 20 50 70 mA Q2 25 35 60 80 dV/dt Critical Rate of Rise of Off-State Voltage VD = 2/3VDRM gate open Tj = 125°C Min. 20 40 400 1000 V/ μs (dV/dt)c Critical Rate of Change of Commutating Voltage (dI/dt)c=-7A/ms Tj = 125°C Min. 0.5 1 10 25 V/ μs Rth(j-c) Junction to case (AC) Max. 1.2 ° C/W Rth(j-a) Junction to ambient(Copper surface under tab:S=1cm 2) Max. 50 ° C/W V A VD RGV A VD RGV A VD RG V A VD RG RL T2+ T2- Q1(T2+G+) Q3(T2-G-) Q2(T2+G-) RL RL G+G- FIG.1:Triac quadrant are defined and the gate trigger test circuit

3 / 6 www.advsemi.com Feb,2013 -Rev.3.02 ADV FIG.3: Typical RMS on-state current VS Allowable case Temperature FIG.4: Maximum transient thermal impedance FIG.2: Maximum on-state power dissipation FIG.5: Rated surge on-state current ( Non-Repetitive) FIG.6: Gate trigger current VS Junction temperature R.M.S On-State Current (A) Power Dissipation(W) R.M.S On-State Current (A) Power Dissipation(W) 0 2 4 6 8 10 12 14 16 18 20 360° Full Cycle 0.1 1 10 Rth(j-c)(°C/W),Transient Thermal Impedance 101 102 103 104 105 tp(ms),Conduction Time 0 50 100 150 200 250 IGT(Tj)/IGT(25°C) x 100(%) 150 125 100 -50 -25 Tj(°C),Junction Temperature 0 4 8 12 16 20 R.M.S On-state Current(A) 150 120

0 Tc(°C),Case Temperature

360° Full Cycle 0 25 50 75 100 125 150 175 200 ITSM(A),Surge On-State Current 102 Number Of Cycles f=50Hz f=60Hzf=60Hzf=60Hzf=60Hz Tj=25°C Max

4 / 6 www.advsemi.com Feb,2013 -Rev.3.02 ADV FIG.7:Holding current and Latching current VS Junction temperature FIG.8: Gate trigger voltage VS Junction tem perature FIG.9: On-state characteristics(Max) 0 50 100 150 200 250 150 125 100 -50 -25 Tj(°C),Junction Temperature 0 50 100 150 200 250 150 125 100 -50 -25 Tj(°C),Junction Temperature IH,IL(Tj)/IH,IL(25°C) x 100(%) 0 50 100 150 200 250 150 125 100 -50 -25 Tj(°C),Junction Temperature 0 50 100 150 200 250 150 125 100 -50 -25 Tj(°C),Junction Temperature 0 50 100 150 200 250 150 125 100 -50 -25 Tj(°C),Junction Temperature 0 50 100 150 200 250 150 125 100 -50 -25 Tj(°C),Junction Temperature VGT(Tj)/VGT(25°C) x 100(%) ITM(A),On-State Current 10-1 100 101 102 3.5 2.5 1.5

0.5 VTM(V),On-State Voltage

(1) (2) (1)Tj=25°C Max (2)Tj=125°C Max

5 / 6 www.advsemi.com Feb,2013 -Rev.3.02 ADV V A c L D BEL1 L3 b1 b e PACKAGE MECHANICAL DATA Making Diagram

Ordering information

Part number Package Marking Packing Quantity ADT16C60G# TO-263-2 ADT16C60G# Tube 50pcs Embossed tape 800pcs ADT16C80G# TO-263-2 ADT16C80G# Tube 50pcs Embossed tape 800pcs Note:# = Gate Trigger Current Sensitivity and type Symb ol Dimensions In Millimeters Dimensions In Inches Min Max Min Max A 4.470 4.670 0.176 0.184 A1 0.000 0.150 0.000 0.006 B 1.170 1.370 0.046 0.054 b 0.710 0.910 0.028 0.036 b1 1.170 1.370 0.046 0.054 c 0.310 0.530 0.012 0.021 c1 1.170 1.370 0.046 0.054 D 10.010 10.310 0.394 0.406 E 8.500 8.900 0.335 0.350 e 2.540 TYP 0.100 TYP e1 4.980 5.180 0.196 0.204 L 15.050 15.450 0.593 0.608 L1 5.080 5.480 0.200 0.216 L2 2.340 2.740 0.092 0.108 L3 1.300 1.700 0.051 0.067 V 5.600 REF 0.220 REF ADV ADT16C60GS XXXX XXXH XX ADV:Logo ADT16C60GS:Part number X:Internal control code H:Halogen Free ADVANCED Internal control code Current:12=12A Quadrant:C=3Q Sensitivity and type: T=5mA S=10mA Blank=35mA B=50mA Voltage:60=600V 80=800V Package explain:G=TO263-2

6 / 6 www.advsemi.com Feb,2013 -Rev.3.02 ADV Notice 1. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any ADV products listed in this document, please confirm the latest product information with a ADV sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by ADV such as that disclosed through our website. (http://www.advsemi.com ) 2. ADV has used reasonable care in compiling the information included in this document, but ADV assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 3. You should use the products described herein within the range specified by ADV, especially with respectvto the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. ADV shall have no liability for malfunctions or damages arising out of the use of ADV products beyond such specified ranges. 4. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability of such information to the intended application.ADV makes no representations, warranties or guaranties regarding the suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this document or ADV products. 5. Although ADV endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a ADV product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 6. This document is provided for reference purposes only so that ADV customers may select the appropriate ADV products for their use. ADV neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of ADV or any third party with respect to the information in this document. 7. ADV shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including, but not limited to, product data, diagrams, charts,programs, algorithms, and application circuit examples. 8. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from ADV.