AD1206 ADV | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

Features

 Low Resistance / Low TCR  Excellent long term stability  High precision current s ensing and voltage division.  These Devices are Pb-Free and are RoHS Compliant Explanation Of Part Numbers: Structural Drawing: Scan the QR code to view the latest product information ADV Sn Plated Marking Ni Plated Alloy Ontology Cu Plated Over-Coat AD 1206 20 F R001 ADVANCED Size(Inch):1206 Resistance: R001=1mΩ，R003=3mΩ R010=10mΩ Tolerance:F=±1%,J=±5%Rated Power ：20=2W，30=3W

2 / 5 www.advsemi.com Feb,2019 -Rev.1.01 ADV Standard Electrical Specifications Performance Characteristics TYPE Rating Power at 70°C T.C.R (ppm/°C) Max. Rating Current Max. Overload Current Resistance Range(mΩ) Material Operating Temperature Range(°C) F:1%,J:5% AD1206 1W ≤±50 31.62 63.24 1 MuCuSu -55~170°C 1W ≤±50 31.62 63.24 2-7 MuCu 1W ≤±50 31.62 63.24 8-10 FeCrAl 1.5W ≤±50 38.72 77.49 1 MuCuSu 1.5W ≤±50 38.72 77.49 2-7 MuCu 1.5W ≤±50 38.72 77.49 8-10 FeCrAl FIG.1: Surface Temperature Curve FIG.2: T.C.R Derating Curve FIG.3: Derating Curve 100 04 0 6 0 8 0 1 0 020 Rating Power/% Surface Temperature/ 110 120 130 140 150 10m 20m 50m -2.0 -1.6 -1.2 -0.8 -0.4 0.0 0.4 0.8 1.2 1.6 2.0 -20 0 20 40 60 80 100 120 Temperature/ dR/R20/% Manganin FeCrAl Operating Temperature 100 -75 -50 -25 0 25 50 75 100 125 150 175 Percent Rated Load 125 Note:Surfacetemperaturerisetestboardsusealuminumsubstrate

3 / 5 www.advsemi.com Feb,2019 -Rev.1.01 ADV Rating Current The following equation may be used to determine the DC (Direct Current) or AC (Alternating Current) (RMS, root mean square value) of normal rated power. However, if the result value exceeds the highest current of regulated standards (paragraph 7), the highest normal rated power is to be used. I = Rating current (A) P= Rating Power (W) R= Resistance(Ω ) Reliability test and requirement Test Item Specificat ions Test Methods Solderability 95%Cover Min IEC60115-14.17 Lead-free solder bath at 245°C±5°C for 3s±0.3s T.C.R Withinspecified T.C.R IEC60115-14.8 20°C -120°C RapidChangeof Temperature Nomechanicaldamage ∆R≤±1.0%R IEC60115-14.19 -55°C (30min) ~normal temperature(5min) ~125°C (30min)100 cycles. Resistanceto SolderingHeat Nomechanicaldamage ∆R≤±1.0%R IEC60115-14.18 Lead-free solder bath at 260°C±5°C for 10s±1s. Shorttimeoverload Nomechanicaldamage ∆R≤±1.0%R IEC60115-14.13 2W:Rated powerX4 for 5 seconds; 3W:Rated powerX3 for 5 seconds. SubstrateBending Test Nomechanicaldamage ∆R≤±1.0%R IEC60115-14.33 (Bending Distance):2mm (duration):60s±5s DampHeat SteadyState Nomechanicaldamage ∆R≤±1.0%R IEC60115-14.24 40°C±2°C，93%±3%RH，1000 hours，Rated current or limiting elementcurrentwhicheverislower1.5hON0.5hOFF. Endurance at 70°C Nomechanicaldamage ∆R≤±1.0%R IEC60115-14.25.1 70°C±2°C，1000h，Rated current or limiting element curret whicheverislower1.5hON0.5hOFF EnduranceatUpper CategoryTemperature Nomechanicaldamage ∆R≤±1.0%R IEC60115-14.25.3 170°C±2°C，1000h Component SolventResistance Nomechanicaldamage ∆R≤±1.0%R IEC60115-14.29 Iso-propyl alcohol(IPA)，23°C±5°C，10h

4 / 5 www.advsemi.com Feb,2019 -Rev.1.01 ADV PACKAGE MECHANICAL DATA 1206Package Dimension Marking Format  All the other products marking are 4 digits.  “R”designates the decimal location in ohms e.g.1mΩ the product marking is R001. 25mΩ the product marking is R001. 100mΩ the product marking is R001.  “m” designates the decim al location in milli-ohms e.g.0.25mΩ the product marking is 0m25. 0.5mΩ the product marking is 0m50. 5.5mΩ the product marking is 5m50. 25.5mΩ the product marking is 25m5. Recommend Land Pattern Design TYPE Power Rating Resistance Range(mΩ) Dimensions In Millimeters A L W T AD1206 1W 1-10 0.6±0.2 1.5W 1-10 0.6±0.2 TYPE Power Rating Resistance Range(mΩ) Dimensions In Millimeters a b i AD1206 1W 1-10 1.80 2.15 1.68 1.5W 1-10 1.80 2.15 1.68 i a Cu Trace Sensing Trace bb L A A WT

5 / 5 www.advsemi.com Feb,2019 -Rev.1.01 ADV Packaging Information  Reel Dimensions(Unit: mm)  Embossed Dimensions(Unit: mm)  Lable Reel Type A W M B D Quantity(EA) 7” reel for 12 mm embossed Type A B W E F P0 P1 P2 ØD0 T M D W A B T EF W P0P2P1 B A Top Tape Resistor Emboss Tape D1 1.4Min direction of unreeling