ADT12A80GS

ADT12A60G ADV | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 6

Technical content

Features

◆ Repetitive Peak Off-State Voltage : 600V and 800V ◆ R.M.S On-State Current ( IT(RMS)= 12 A ) ◆ These are Pb-Free Devices Absolute Maximum Ratings Scan the QR code to view the latest product information ADV TO-263-2 2.A 1.K 3.G

2 / 6 www.advsemi.com Feb,2020 -Rev.3.06 ADV Electrical Characteristics ( Tj = 25°C unless otherwise specified ) Symbol Items Conditions ADT12A60G/80G Unit T S Blank IDRM IRRM Peak Forward Reverse Blocking Current VDRM = VRRM, RGK = 1KΩ Tj = 25°C Max. 5 uA VDRM = VRRM, RGK = 1KΩ Tj = 125°C 2 mA VTM Peak On-State Voltage I TM = 24A, tp = 380 μs Max. 1.55 V VGD Non-Trigger Gate Voltage VD = VDRM R L = 3.3 kΩ RGK = 1KΩ Tj = 125°C Min. 0.2 V VGT Gate Trigger Voltage VD = 12V ，RL = 33Ω Max. 1.5 V IGT Gate Trigger Current Max. 0.2 15 30 mA IH Holding Current I T = 0.5A R GK = 1KΩ Max. 5 30 40 mA IL Latching Current I G = 1.2 IGT RGK = 1KΩ Max. 7 50 60 mA dV/dt Critical Rate of Rise of Off-State Voltage VD = 2/3VDRM gate open RGK = 1KΩ Tj = 125°C Min. 200 500 600 V/μs Rth(j-c) Junction to case (AC) Max. 1.3 ° C/W Rth(j-a) Junction to ambient(Copper surface under tab:S=1cm 2) Max. 45 ° C/W

3 / 6 www.advsemi.com Feb,2020 -Rev.3.06 ADV FIG.2: Average on-state current VS Allowable case Temperature(Single phase half wave) FIG.3: Gate trigger current VS Junction tem perature FIG.1: Maximum average power dissipation (Single phase half wave) FIG.4: Rated surge on-state current ( Non-Repetitive) FIG.5: On-state characteristics(Max) ITM(A),On-State Current 10-1 100 101 102 3.5 2.5 1.5

0.5 VTM(V),On-State Voltage

(1) (2) (1)Tj=25°C Max (2)Tj=125°C Max 0 50 100 150 200 250 IGT(Tj)/IGT(25°C) x 100(%) 150 125 100 -50 -25 Tj(°C),Junction Temperature Power Dissipation(W)

2 Average On-State Current (A)

Power Dissipation(W) 0 2 4 6 8 10 12 14 16 18 20 θ=180° 360° θ 0 2.5 5 7.5 10 12.5 Average On-state Current(A) 150 120

0 Tc(°C),Case Temperature

360° θ θ=180° 0 30 60 90 120 150 180 210 240 Surge On-State Current(A) 102 Number Of Cycles f=50Hz Tj=25°C Max

4 / 6 www.advsemi.com Feb,2020 -Rev.3.06 ADV FIG.6:Holding current and Latching current VS Junction temperature FIG.7: Gate trigger voltage VS Junction tem perature 0 50 100 150 200 250 150 125 100 -50 -25 Tj(°C),Junction Temperature 0 50 100 150 200 250 150 125 100 -50 -25 Tj(°C),Junction Temperature IH,IL(Tj)/IH,IL(25°C) x 100(%) 0 50 100 150 200 250 150 125 100 -50 -25 Tj(°C),Junction Temperature 0 50 100 150 200 250 150 125 100 -50 -25 Tj(°C),Junction Temperature 0 50 100 150 200 250 150 125 100 -50 -25 Tj(°C),Junction Temperature 0 50 100 150 200 250 150 125 100 -50 -25 Tj(°C),Junction Temperature VGT(Tj)/VGT(25°C) x 100(%) FIG.8:Holding current and Latching current VS Junction temperature for type T gate triggering FIG.8: Gate trigger current VS Junction temperature for type T gate triggering 0 50 100 150 200 250 IGT(Tj)/IGT(25°C) x 100(%) 150 125 100 -50 -25 Tj(°C),Junction Temperature RGK=1K 0 50 100 150 200 250 150 125 100 -50 -25 Tj(°C),Junction Temperature 0 50 100 150 200 250 150 125 100 -50 -25 Tj(°C),Junction Temperature IH,IL(Tj)/IH,IL(25°C) x 100(%) RGK=1KΩ Ω

5 / 6 www.advsemi.com Feb,2020 -Rev.3.06 ADV PACKAGE MECHANICAL DATA Making Diagram

Ordering information

Part number Package Marking Packing Quantity ADT12A60G# TO-263-2 ADT12A60G# Tube 50pcs Embossed tape 800pcs ADT12A80G# TO-263-2 ADT12A80G# Tube 50pcs Embossed tape 800pcs Note:# = Gate Trigger Current Sensitivity and type ADV ADT12A80GS XXXX XXXH XX ADV:Logo ADT12A80GS:Part number X:Internal control code H:Halogen Free ADVANCED Internal control code Current:12=12A SCR Series Sensitivity and type: T=0.2mA S=15mA Blank=30mA W=80mA Voltage:60=600V 80=800V Package explain:G=TO263-2 Symb ol Dimensions In Millimeters Dimensions In Inches Min Max Min Max A 4.400 4.800 0.173 0.189 A1 0.000 0.250 0.000 0.010 B 1.170 1.600 0.046 0.063 b 0.710 0.910 0.028 0.036 b1 1.050 1.450 0.041 0.057 c 0.280 0.550 0.011 0.022 c1 1.170 1.370 0.046 0.054 D 9.900 10.350 0.390 0.407 E 8.500 9.600 0.370 0.334 e 2.540 TYP 0.100 TYP L 14.700 15.800 0.579 0.622 L1 3.800 5.480 0.149 0.215 L2 2.050 2.950 0.081 0.116 L3 1.750 0.069 A c L D BEL1 L3 b1 b e

6 / 6 www.advsemi.com Feb,2020 -Rev.3.06 ADV Notice 1. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this document is issued. Such informatio n, however, is subject to change without any prior notice. Befo re purchasing or using any ADV products listed in this document, please confi rm the latest product information with a ADV sales office. Also , please pay regular and careful attention to additional and different infor mation to be disclosed by ADV s uch as that disclosed through ou r website. (http://www.advsemi.com ) 2. ADV has used reasonable care in compiling the information incl uded in this document, but ADV assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 3. You should use the products described herein within the range specified by ADV, especially with respectvto the maximum rating, operating supply voltage range, movement power voltage range, heat radiat ion characteristics, installat ion and other product characteris tics. ADV shall have no liability for malfunctions or damages arising out of the use of ADV products beyond such specified ranges. 4. When using or otherwise relying on the information in this docu ment, you should evaluate the information in light of the total system before deciding about the applicability of such information to the int ended application.ADV makes no representations, warranties or g uaranties regarding the suitability of its products for any particular ap plication and specifically disclaims any liability arising out of the application and use of the information in this document or ADV products. 5. Although ADV endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a ADV product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 6. This document is provided for reference purposes only so that A DV customers may select the ap propriate ADV products for their use. ADV neither makes warranties or representations with respect to the accuracy or completeness of the information contained in t his document nor grants any license to any intellectual property ri ghts or any other rights of ADV or any third party with respect to the information in this document. 7. ADV shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including, but not limited to, product data, diagrams, charts,programs, algorithms, and application circuit examples. 8. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from ADV.