ADL-52051SM ROITHNER | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
www.roithner-laser.com 1 ADL-52051SM
- Green APC Laser Diode
- Automatic Power Control (APC)
- 520 nm, 5 mW
- Modulation Bandwidth < 2 MHz
- Supply Voltage 6 VDC
- TO33 Package, Flat Window
Description
ADL-52051SM is a green laser diode, typically emitting at 520 nm with an output power of <5 mW, and a modulation bandwidth of up to 2 Mhz (PWM). It features an integrated automatic power control (APC) driver and can be operated through a 6 VDC voltage source. ADL-52051SM comes in 3.3 mm TO-Can package with flat glass window. Maximum Ratings* Parameter Symbol Values Unit Min. Max. Power Supply Voltage UCC 5.8 7.0 V Optical Output Power PO 5.0 mW Operating Temperature* TOPR - 10 + 50 °C Storage Temperature* TSTG - 40 + 85 °C Soldering Temperature (tmax. 3s) TSOL + 260 °C * operation close to or outside these parameters may damage the device Electro-Optical Characteristics (TC = 25°C, PO = 5 mW, UCC = 6V) Parameter Symbol Values Unit Min. Typ. Max. Peak Wavelength λP 510 520 530 nm Power Variation ∆PO -10 +10 % Power/Temperature Variation (-10 …50 °C) ∆POT -15 +10 % Power/Supply Voltage Variation (5.8…7.0 V) ∆POU -15 +10 % Current Draw ICC 50 80 mA Chip Positioning Accuracy ∆X, ∆Y, ∆Z, -80 +80 µm Beam Divergence (FWHM) parallel ӨII 3 7 12 deg. perpendicular Ө┴ 15 23 30 deg. Beam Deviation parallel ∆ӨII -5 +5 deg. perpendicular ∆Ө┴ -5 +5 deg. Bandwidth (PWM, duty cycle = 50%) fM 100 2000 KHz Safety Advice Laser light emitted from any laser diode may be harmful to the human eye. Avoid looking directly into the laser diode’s aperture. The use of optical lenses will increase eye hazard
www.roithner-laser.com 2 Typical Performance Curves Output Power vs. Supply Voltage Current Draw vs. Supply Voltage Output Power [mW] Current Draw [mA] Supply Voltage [V] Supply Voltage [V] Output Power vs. Temperature Current Draw vs. Temperature Output Power [mW] Current Draw [mA] Temperature [°C] Temperature [°C]
www.roithner-laser.com 3 Electrical Connection Pin Configuration Bottom View CW PWM Schematics
- No external driver required
- APC driver IC integrated into the TO-Can
- 10 µF capacitor recommended for PWM operation
- Battery reverse protection recommended
- 1 µF capacitor recommended for low power operation (<50%) Outline Dimensions TO33 all dimensions in mm © All Rights Reserved The above specifications are for reference purpose only and subjected to change without prior notice Pin # Function Pin 1 UCC Pin 2 GND Pin 3 PWM