DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 12
Technical content
Features
/g120 Available in Cool White and Warm White color. /g120 Various options with different number of LEDs on MCPCB to meet different lighting output requirement /g120 Energy efficient /g120 Exposed pad for excellent heat transfer /g120 Integrated heat sink to simplify thermal management design for efficient heat dissipation /g120 Long operation life. /g120 Wide viewing angle. /g120 Silicone encapsulation /g120 Ease of mechanical mounting /g120 Plug & Play assembly for ease of installation /g120 Lead free and ROHS compliant Specifications /g120 InGaN technology /g120 Smooth wide radiation pattern
ADJD-xM00 (3 LEDs) ADJD-xM01 (3 LEDs) ADJD-xM10 (4 LEDs) ADJD-xM21 (6 LEDs) Notes: 1. All dimensions are in millimeters. 2. Tolerance is ±0.1mm unless otherwise specified.
Notes: 1. All dimensions are in millimeters. 2. Tolerance is ±0.1mm unless otherwise specified. 66.80 120˚ R1.70 Ø88.00 Ø140.00 Ø4.00 49.50 Ø110.00 290.01.6 290.0 R1.63.0 35.0 14.9 72.5 24.2 145.0 72.50 145.00 290.0 35.00 17.50 16.20 32.20 R1.6 ADJD-xM30 (9 LEDs) ADJD-xM40 (12 LEDs) Light Ring & Round ADJD-xMR0 (7 LEDs) ADJD-xMR3 (8 LEDs)
Device Selection Guide (TJ = 25°C) [1] Module Type Color No. of LEDs Part Number Luminous Flux, Φv [2,3] (lm) Test Current Dice TechnologyMin. Typ. Max. (mA) Strip Cool White
3 ADJD-WM00
56.0 80.0 124.0 350 InGaN
3 ADJD-WM01
4 ADJD-WM10
6 ADJD-WM21
9 ADJD-WM30
12 ADJD-WM40
3 ADJD-YM00
56.0 70.0 95.0 350 InGaN
3 ADJD-YM01
4 ADJD-YM10
6 ADJD-YM21
9 ADJD-YM30
12 ADJD-YM40
Round Cool White 7 ADJD-WMR0 56.0 80.0 124.0 350 InGaN Ring 8 ADJD-WMR3 Round Warm White 7 ADJD-YMR0 56.0 70.0 95.0 350 InGaN Ring 8 ADJD-YMR3 Notes: 1. Applicable to a single unit of LED only. Data are based on ASMT-Mxx4 component level device only. 2. /g73 V is the total luminous flux output as measured with an integrating sphere at 25ms mono pulse condition. 3. Flux tolerance is ±10 %. Note: 1. Please refer to Page 10 for selection details. Table 1. x2x3 No. of LEDs Module Type Resistor Driving Condition 00 3 Strip No Current 01 3 Strip Yes Voltage 10 4 Strip No Current 21 6 Strip Yes Voltage 30 9 Strip No Current 40 12 Strip No Current R0 7 Round No Current R3 8 Ring No Current Part Numbering System ADJD – x 1 M x 2x3 – N x 4 x 5 x 6 x 7 Packaging Option Color Bin Selection Maximum Flux Bin Selection Minimum Flux Bin Selection Please refer to Table 1 Color W - Cool White Y - Warm White
Absolute Maximum Ratings at TA = 25°C Parameter ADJD- xM00 xM10 xMR0 xM40 xMR3 xM30 xM01 xM21 Units DC Forward Current [1] 350 350 350 700 700 1050 mA Input Voltage [2] 12 12 V Operating Ambient Temperature Range -40 to +85 °C Storage Temperature Range -40 to +100 °C Note: 1.DC forward current. 2.Input Voltage only applicable for ADJD-xM01 and ADJD-xM21. Optical Characteristics at 350 mA (TJ = 25°C) [1] Part Number No. of LEDs Color Correlated Color Temperature, CCT (Kelvin) Viewing Angle 2θ½ [2] (Degrees) Luminous Efficiency (lm/W) Min Max Typ Typ ADJD-WM00 3 Cool White 4000 10000 110 65 ADJD-WM01 3 ADJD-WM10 4 ADJD-WM21 6 ADJD-WM30 9 ADJD-WM40 12 ADJD-WMR0 7 ADJD-WMR3 8 ADJD-YM00 3 Warm White 2600 4000 110 57 ADJD-YM01 3 ADJD-YM10 4 ADJD-YM21 6 ADJD-YM30 9 ADJD-YM40 12 ADJD-YMR0 7 ADJD-YMR3 8 Notes: 1. Applicable to a single unit of LED only. Data are based on ASMT-Mxx4 component level device only. 2. /g84½ is the off-axis angle where the luminous intensity is ½ the peak intensity. Electrical Characteristic at 350 mA (TJ = 25 °C) [1] Dice Type Forward Voltage VF (Volts) Input Voltage Vin [2] (Volts) Notes: 1. Applicable to a single unit of LED only. Data are based on ASMT-Mxx4 component level device only. 2. Input Voltage only applicable for ADJD-xM01 and ADJD-xM21.
ADJD-xM00 (3 LEDs) Pin Number[A] Configuration
1 Neg-
2 Pos+
ADJD-xM10 (4 LEDs) ADJD-xMR3 (8 LEDs) *Note: A. The above configuration is only applicable for ADJD-xM00 / ADJD-xM10 and ADJD-xMR3 ADJD-xMR0 (7 LEDs) *Note: Connector is not applicable for ADJD-xMR0
ADJD-xM01 (3 LEDs) Pin Number [C] Configuration
4 Pos+
Pin Number [B] Configuration ADJD-xM21 (6 LEDs) *Note: B. The above configuration is only applicable for ADJD-xM01 and ADJD-xM21 ADJD-xM30 (9 LEDs) ADJD-xM40 (12 LEDs) *Note: C. The above configuration is only applicable for ADJD-xM30 and ADJD-xM40 Recommend Female Connector: Tyco 173977-2 Pin 2 Neg - Pin 1 Pos+ Pin 2 Neg - Pin 1 Pos+ Pin 1 2 + - Pin 1 Neg – Pin 2 NC Pin 4 Pos + Pin 3 NC Pin 4 Pos + Pin 3 NC Pin 1 Neg – Pin 2 NC Pin 1 2 Pin 3 4 NC NC
Color Bin Selections [x 6] Individual tray will contain parts from one color bin selection only. Cool White O Full Distribution A A only B B only C C only D D only E E only F F only G G only H H only L A and G only M B and H only N A and C only P B and D only Q E and C only R F and D only S G and H only U E and F only W C and D only Z A and B only
1 A, B, C and D only
2 G, H, A and B only
4 C, D, E and F only
Flux Bin Limit [x4, x5] Bin Luminous Flux (lm) at IF = 350mA Min. Max. K 56.0 73.0 L 73.0 95.0 M 95.0 124.0 Notes: 1. Tolerance for each bin limits is ±10 %. 2. Applicable to a single unit of LED ASMT-Mxx4 only. Option Selection Details ADJD - x1 M x2x3 - N x4 x5 x6 x7 x4 – Minimum Flux Bin x5 – Maximum Flux Bin x6 – Color Bin Selection x7 - Packaging Option.
Figure 13. Color bins (Warm White).Figure 12. Color bins (Cool White).
For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright © 2005-2010 Avago Technologies Limited. All rights reserved. AV02-1120EN - June 25, 2010 Handling Precaution The encapsulation material of the product is made of silicone for better reliability of the product. As silicone is a soft material, please do not press on the silicone or poke a sharp object onto the silicone. These might damage the product and cause premature failure. During assembly or handling, the unit should be held on the body (white plastic). DISCLAIMER: AVAGO’S PRODUCTS AND SOFTWARE ARE NOT SPECIFICALLY DESIGNED, MANUFACTURED OR AU- THORIZED FOR SALE AS PARTS, COMPONENTS OR ASSEMBLIES FOR THE PLANNING, CONSTRUCTION, MAINTENANCE OR DIRECT OPERATION OF A NUCLEAR FACILITY OR FOR USE IN MEDICAL DEVICES OR APPLICATIONS. CUSTOMER IS SOLELY RESPONSIBLE, AND WAIVES ALL RIGHTS TO MAKE CLAIMS AGAINST AVAGO OR ITS SUPPLIERS, FOR ALL LOSS, DAMAGE, EXPENSE OR LIABILITY IN CONNECTION WITH SUCH USE.