ADJD-E622-QR999

ADJD-E622-QR999 AVAGO | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

Features

• Convert light to R,G,B voltage output
• Monolithic CMOS IC solution comprises of an array of photodiode coated with R,G, B color filter and integrated with transimpedance amplifier.
• Independent gain selection options for each R,G,B channel
• 3 sets of 3x3 photodiode array design to minimize the effect of contamination and optical aperture misalignment
• Qualified per Automotive AEC-Q100 Standard (Grade 3)
• Rοbust package and small in size 5x 5x 0.75 mm

Description

ADJD-E622-QR999 is a high performance, small in size, cost effective light to voltage converting sensor. The sensor combines a photodiode array and three trans- impedance amplifiers in a single monolithic CMOS IC solution. With a Red (R), Green (G) and Blue (B) color filters coated over the photodiode array, the sensor converts RGB light to analog voltage outputs, denoted by VROUT, VGOUT and VBOUT, respectively. The sensor is packaged in a 5x5x0.75 [mm] surface mount QFN-16 package.

Applications

• Ideal choice of light sensor in automotive applications such as dashboard lighting, automotive interior lighting, infotainment and navigational panel.
• Other potential applications are such as environmental lighting, cabin lighting, decorative lighting, general color detection, industrial process, etc.
• Can also be coupled with Avago Technologies’ patented color controller, HDJD-J822, to form a closed loop color management system THIS PRODUCT IS NOT CERTIFIED OR WARRANTIED FOR AUTOMOTIVE APPLICATIONS. IF THE CUSTOMER INTENDS TO USE IT FOR AUTOMOTIVE APPLICATIONS, THEY DO SO AT THEIR OWN RISK. AVAGO WILL NOT BE RESPONSIBLE FOR ANY CLAIM OF PRODUCT FAILURE DURING OPERATION OR RELIABILITY ASSESSMENT. ESD WARNING: Standard CMOS handling precautions should be observed to avoid static discharge.

Gain Selection (GS) Option 999: For component level GS 000,001,010,011,100,101,110,111 Packing TypePacking Type R: Tape and Reel Product PackagingProduct Packaging Q: QFN Product IDProduct ID 22: component without IR filter (QFN 5x5) ADJD-E 6 X X -X X X X X Package Dimension Note: Dimensions are in millimeters (mm) Bottom View 16 15 14 13 8765 0.75±0.10 0.8 3.2 3.2 5.0±0.15 5.0±0.15 0.30

The integral R,G,B color filters on the photodiode array detect the R,G,B components of the light falling on the sensor. The photodiode convert the R,G,B light components into photocurrents. The integrated transimpedence amplifiers for R,G,B components then converts the photocurrent to analog voltage outputs. The voltage output of each R,G,B channel increases linearly with increasing light intensity. Sensor IC Block Diagram Pin Out for ADJD-E622-QR999 Pin Pin Name Normal Operation Pin 1 VB OUT Analog output voltage for BLUE Pin 2 VG OUT Analog output voltage for GREEN Pin 3 VR OUT Analog output voltage for RED Pin 4 VDD 5V DC Supply Pin 5 GSGRN2 Gain Selection Green bit 2 Pin 6 GSGRN1 Gain Selection Green bit 1 Pin 7 GSRED2 Gain Selection Red bit 2 Pin 8 GSRED1 Gain Selection Red bit 1 Pin 9 GSRED0 Gain Selection Red bit 0 Pin 10 NC No connection Pin 11 NC No connection Pin 12 GSBLUE0 Gain Selection Blue bit 0 Pin 13 GSBLUE1 Gain Selection Blue bit 1 Pin 14 GSBLUE 2 Gain Selection Blue bit 2 Pin 15 GSGRN 0 Gain Selection Green bit 0 Pin 16 GND Ground

Recommended Operating Conditions Remarks: 1. The device is with moisture sensitivity level 3. 2. For optimized signal output, RC filters must be added at each of the R, G and B voltage output. Absolute Maximum Ratings [1,2] Note: 1. Subjecting the part to stresses beyond those listed under this section may cause permanent damage to the device. These are s tress ratings only and do not imply that the devices will function beyond these ratings. Exposure to the extremes of these condition s for extended periods may affect device reliability. 2. Unless otherwise specified, voltages are referenced to ground. 3. Maximum ESD rating for corner pin is 750V Gain Selection Rext Cext GS:000 to GS:101 15kΩ 1nF GS:110 to GS:111 15kΩ 6.8nF For illustration purpose, only red channel is shown. The same circuit applies to green and blue channel. LED Signal Generator Rext Cext Vout C R VRout RC Lowpass Filter Red Channel Parameter Symbol Min Max Unit Notes Supply Voltage V DD 4.5 5.5 V Storage Temperature T S -50 105 °C Operating Temperature T A -40 85 °C Human Body Model ESD Rating ESD HBM 8k V Machine Model ESD Rating ESD MM 200 V Charge Device Model ESD Rating [3] ESDCDM 500 V Parameter Sym. Min. Typ. Max. Units Notes Operating Temperature T A 02 5 7 0 ° C Supply Voltage V DD 4.5 5.0 5.5 V A decoupling capacitor of 100nF between VDD and ground is recommended.

Operating Conditions and Electrical Requirements Electrical Characteristics at VDD = 5V, TA = 25°C, RL = 68kΩΩΩΩΩ Parameter Sym. Remark Min. Typ. Max. Unit Dark voltage V D Ee = 0 20 mV Max. output voltage swing VOMAX 4.7 V Supply current I DD Ee = 0 2.4 mA Irradiance Responsivity Re GS:111, λP = 460 nm [2] (Blue Channel) 12 V/ (mW/cm2)GS:111, λP = 542 nm [3] (Green Channel) 18 GS:111, λP = 645 nm [4] (Red Channel) 26 Irradiance Responsivity Re GS:110, λP = 460 nm [2] (Blue Channel) 10 V/ (mW/cm2)GS:110, λP = 542 nm [3] (Green Channel) 14 GS:110, λP = 645 nm [4] (Red Channel) 20 Irradiance Responsivity Re GS:101, λP = 460 nm [2] (Blue Channel) 7 V/ (mW/cm2)GS:101, λP = 542 nm [3] (Green Channel) 11 GS:101, λP = 645 nm [4] (Red Channel) 16 Irradiance Responsivity Re GS:100, λP = 460 nm [2] (Blue Channel) 6 V/ (mW/cm2)GS:100, λP = 542 nm [3] (Green Channel) 8 GS:100, λP = 645 nm [4] (Red Channel) 12 Irradiance Responsivity Re GS:011, λP = 460 nm [2] (Blue Channel) 5 V/ (mW/cm2)GS:011, λP = 542 nm [3] (Green Channel) 6 GS:011, λP = 645 nm [4] (Red Channel) 9 Irradiance Responsivity Re GS:010, λP = 460 nm [2] (Blue Channel) 4 V/ (mW/cm2)GS:010, λP = 542 nm [3] (Green Channel) 5 GS:010, λP = 645 nm [4] (Red Channel) 7 Irradiance Responsivity Re GS:001, λP = 460 nm [2] (Blue Channel) 3 V/ (mW/cm2)GS:001, λP = 542 nm [3] (Green Channel) 4 GS:001, λP = 645 nm [4] (Red Channel) 6 Irradiance Responsivity Re GS:000, λP = 460 nm [2] (Blue Channel) 2 V/ (mW/cm2)GS:000, λP = 542 nm [3] (Green Channel) 3 GS:000, λP = 645 nm [4] (Red Channel) 4 Saturation Irradiance [5] GS:111, λP = 460 nm [2] (Blue Channel) 0.39 mW/cm 2 GS:111, λP = 542 nm [3] (Green Channel) 0.26 GS:111, λP = 645 nm [4] (Red Channel) 0.18 Saturation Irradiance [5] GS:110, λP = 460 nm [2] (Blue Channel) 0.47 mW/cm 2 GS:110, λP = 542 nm [3] (Green Channel) 0.34 GS:110, λP = 645 nm [4] (Red Channel) 0.23

C R V Rout Color Sensor RC Lowpas s Fi l t er Red Channel Gain Selection Rext Cext GS:000 to GS:101 15kΩ 1nF GS:110 to GS:111 15kΩ 6.8nF Parameter Sym. Remark Min. Typ. Max. Unit Saturation Irradiance [5] GS:101, λP = 460 nm [2] (Blue Channel) 0.67 mW/cm2 GS:101, λP = 542 nm [3] (Green Channel) 0.43 GS:101, λP = 645 nm [4] (Red Channel) 0.29 Saturation Irradiance [5] GS:100, λP = 460 nm [2] (Blue Channel) 0.78 mW/cm2 GS:100, λP = 542 nm [3] (Green Channel) 0.59 GS:100, λP = 645 nm [4] (Red Channel) 0.40 Saturation Irradiance [5] GS:011, λP = 460 nm [2] (Blue Channel) 0.94 mW/cm2 GS: 011, λP = 542 nm [3] (Green Channel) 0.78 GS: 011, λP = 645 nm [4] (Red Channel) 0.53 Saturation Irradiance [5] GS:010, λP = 460 nm [2] (Blue Channel) 1.18 mW/cm2 GS:010, λP = 542 nm [3] (Green Channel) 0.94 GS:010, λP = 645 nm [4] (Red Channel) 0.71 Saturation Irradiance [5] GS:001, λP = 460 nm [2] (Blue Channel) 1.57 mW/cm2 GS:001, λP = 542 nm [3] (Green Channel) 1.18 GS:001, λP = 645 nm [4] (Red Channel) 0.85 Saturation Irradiance [5] GS:000, λP = 460 nm [2] (Blue Channel) 2.35 mW/cm2 GS:000, λP = 542 nm [3] (Green Channel) 1.57 GS:000, λP = 645 nm [4] (Red Channel) 1.34 Output rise time t r GS:000 to GS101 Test Condition: Refer to note [1] (min Vo = 0V, peak Vo = 2V) 45 µs GS:110 to GS:111 Test Condition: Refer to note [1] (min Vo = 0V, peak Vo = 2V) 220 µs Output fall time t f GS:000 to GS101 Test Condition: Refer to note [1] (min Vo = 0V, peak Vo = 2V) 50 µs GS:110 to GS:111 Test Condition: Refer to note [1] (min Vo = 0V, peak Vo = 2V) 240 µs Remarks: For illustration purpose, only red channel is shown. The same circuit applies to green and blue channel. Notes: 1. Test condition: The rise and fall time is measured with RC lowpass filter added to sensor output: 2. Test condition: using blue diffuse light of peak wavelength ( λP) 460nm and spectral half width ( ∆λ½) 25nm as light source. 3. Test condition: using green diffuse light of peak wavelength ( λP) 542nm and spectral half width ( ∆λ½) 35nm as light source. 4. Test condition: using red diffuse light of peak wavelength ( λP) 645nm and spectral half width ( ∆λ½) 20nm as light source. 5. Saturation irradiance = (Max output voltage swing)/(Irradiance responsivity)

Figure 1. Spectral Responsivity in which 0=connect to Ground, 1=no connection. Refer to Gain Selection Feedback Resistor Table.

1. Gains selections, GS: Bit 2 Bit 1 Bit 0 are applicable for each Red,
2. Gain selections for each channel can be selected independently
3. Feedback resistor value is proportional to responsivity. Refer to
4. 0 indicates that the pin is connected to ground. 1 indicates no

16 Lead QFN Recommended PCB Land Pad Design

IPC-SM-782 is used as the standard for the PCB land- pad design. Recommended PCB finishing is gold plated.

16 Lead QFN Recommended Stencil Design

A stencil thickness of 2.18mm (6mils) for this QFN package is recommended. Figure 7. Figure 8. 3.19 mm 3.19 mm 0.8 mm 0.8 mm5.5 mm 5.5 mm 3.9 0.4 mm 0.8 mm0.4 mm 2.18mm Recommendations for Handling and Storage of ADJD E622 QR999 This product is qualified as Moisture Sensitive Level 3 per Jedec J-STD-020. Precautions when handling this moisture sensitive product is important to ensure the reliability of the product. Do refer to Avago Application Note AN5305 Handling Of Moisture Sensitive Surface Mount Devices for details. A. Storage before use - Unopened moisture barrier bag (MBB) can be stored at 30°C and 90%RH or less for maximum 1 year - It is not recommended to open the MBB prior to assembly (e.g. for IQC) - It should also be sealed with a moisture absorbent material (Silica Gel) and an indicator card (cobalt chloride) to indicate the moisture within the bag B. Control after opening the MBB - The humidity indicator card (HIC) shall be read immediately upon opening of MBB - The components must be kept at <30°C/60%RH at all time and all high temperature related process including soldering, curing or rework need to be completed within 168hrs C. Control for unfinished reel - For any unused components, they need to be stored in sealed MBB with desiccant or desiccator at <5%RH D. Control of assembled boards - If the PCB soldered with the components is to be subjected to other high temperature processes, the PCB need to be stored in sealed MBB with desiccant or desiccator at <5%RH to ensure no components have exceeded their floor life of 168hrs E. Baking is required if: - “10%” or “15%” HIC indicator turns pink - The components are exposed to condition of >30°C/60%RH at any time. - The components floor life exceeded 168hrs - Recommended baking condition (in component form): 125°C for 24hrs

Package Tape and Reel Dimensions Carrier Tape Dimensions Reel Dimensions Ko Bo SECTION B-B SECTION A-A Ao 0.30 0.05 B B AA 1.75 .10 5.50 0.05 12.00 0.10 R 0.50 TYP. 1.55 0.05 4.00 0.10 SEE NOTE #2 2.00 0.05 SEE NOTE #2 Ao: Bo: Ko: PITCH: WIDTH: 5.30 5.30 2.20 8.00 12.00 NOTES: 1. Ao AND Bo MEASURED AT 0.3 mm ABOVE BASE OF POCKET. 2. 10 PITCHES CUMULATIVE TOLERANCE IS 0.2 mm. 3. DIMENSIONS ARE IN MILLIMETERS (mm). 18.0 MAX.* 178.0 0.5 12.445 R10.65 R5.2 +1.5* Ð0.0 55.0 0.5 176.0 512EMBOSSED RIBS RAISED: 0.25 mm WIDTH: 1.25 mm BACK VIEW NOTES: 1. *MEASURED AT HUB AREA. 2. ALL FLANGE EDGES TO BE ROUNDED.

For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countrie s. Data subject to change. Copyright © 2007 Avago Technologies Limited. All rights reserved. AV01-0143EN - January 8, 2007 THIS PRODUCT IS NOT CERTIFIED OR WARRANTIED FOR AUTOMOTIVE APPLICATIONS. IF THE CUSTOMER INTENDS TO USE IT FOR AUTOMOTIVE APPLICATIONS, THEY DO SO AT THEIR OWN RISK. AVAGO WILL NOT BE RESPONSIBLE FOR ANY CLAIM OF PRODUCT FAILURE DURING OPERATION OR RELIABILITY ASSESSMENT. ESD WARNING: Standard CMOS handling precautions should be observed to avoid static discharge.