DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Features
Fully Temperature and Voltage Compensated Diode RF Detector -20 dBm to 11 dBm Power Detection Range Small, Thin Package (1.2 x 1.5 x 0.5 mm) Complete coverage of 3GPP bands from 700-2600 MHz Fast Response Time and Wide Bandwidth High Sensitivity and User-Adjustable Input Range High Output Impedance in Power Down Mode Low Harmonic Generation 6-pin surface mounting package Lead-free, RoHS compliant, Green (Halogen Free)
Applications
CDMA/UMTS/LTE Handsets & Data Cards
No damage assuming only one parameter is set at limit at a time with all other parameters set at or below nominal value Operation of any single parameter outside these conditions with the remaining parameters set at or below nominal values may result in permanent damage Description Max. Unit RF Input Power (Pin) 13 dBm DC Supply / Control Voltage (Ven) 3 V Storage Temperature (Tstg) -30 to +125 C Recommended Operating Conditions Description Min. Typ. Max. Unit Enable Voltage (Ven Low High 2.0 0.2 2.2 0.5 2.7 V Enable Current (Ien @ Ven = 2.7 V) 800 1000 A Case Temperature -30 25 85 C
Electrical Characteristics
– Conditions: Ven = 2.2 V, T = 25° C, Zload = 100 kohm in parallel with 12 pF Characteristics Condition Min. Typ. Max. Unit Operating Frequency Range 700 – 2600 MHz Power Detect Range (Pin) -20 – +11 dBm Average Output Voltage Pin = +9 dBm Pin = -11.5 dBm Pin = -12.5 dBm 0.93 0.45 0.45 1.10 0.48 0.47 1.30 0.50 0.49 V Power Detect Slope Pin = -12.5 dBm 4.3 5.3 9.3 mV/dB Len (RF input = off ) 150 350 1000 A DC Off set Output Voltage with RF Off 450 mV RF Input Resistance Rext open (not connected) 100 ohms
100 MHz
300 MHz
700 MHz
900 MHz
1900 MHz
2600 MHz
Figure 1. Detector Voltage vs. Input Power over temperature at 1900 MHz, Figure 2. Detector Voltage vs. Input Power over temperature at 1900 MHz, Figure 5. Detector Voltage vs. Frequency from 100-2600MHz over Input Powers, Table 1. Typical RMS Error @ 25C for various modulation schemes.
(All dimensions are in millimeters) Pin 1 Mark 0.5 ±0.05 X-RAY TOP VIEW 0.41 0.72 0.3 0.2 0.4 Pin 1 Identification 0.1 mm x 45 deg 1.5 ±0.05 1.2 ±0.05 Paddle Pin Name Description
1 Ven Detector Enable
2 Pin RF Input
3 NC Not connected
4 NC Not connected
5 Vdet Detected Output Voltage
6 NC Not connected
Paddle GND Center Ground Paddle 1.60 0.41 0.40 0.20 0.20 0.72 1.00 0.35 Land Pattern Stencil Opening 0.42 0.65 1.08 0.24 0.30 0.18 1.50 0.37 1.50 1.60 0.41 0.37 0.40 0.20 0.65 0.72 1.00 1.08 Combination of Land Pattern and Stencil Opening
Package, Reel & Tape Specifi cations USER FEED DIRECTION TOP VIEW END VIEW USER FEED DIRECTION COVER TAPE CARRIER TAPE REEL XY XY XY Tape Dimensions Notes: 1. Leader and Trailer – 200 empty pockets 2. Carrier tape dimension (unit in mm) 4.00±0.10 4.00±0.10 8.00 +0.30 -0.10 2.00±0.05 1.50±0.10 1.50+0.15 1.75±0.10 3.50±0.05 1.69±0.05 0.65±0.05 5° MAX 5° MAX 1.41±0.05 0.25±0.02 A. K. B. Carrier Height Information 0.33* * with assumption 0.4mm unit height and 0.73 carrier height
For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2012 Avago Technologies. All rights reserved. AV02-3546EN - October 16, 2012
Ordering Information
Part Number Number of Devices Container ADET-5000-TR1 3,000 178mm (7”) Tape/Reel ADET-5000-BLK 100 Antistatic Bag Reel Dimensions - 7 inch