ADA10000 ANADIGICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 12

Technical content

Data Sheet - Rev 2.3 Modified 16 Pin SOIC Figure 1: Block Diagram

FEATURES

  • High Linearity : +15 dBm IIP3 (+8 V supply)
  • Low Distortion
  • Low Noise Figure: 2.0 dB
  • 15 dB Gain
  • Single +4 V to +9 V Supply
  • Wide Bandwidth: 50 MHz to 1 GHz
  • SOIC-16 and SOT-89 Package Options PRODUCT DESCIPTION The ADA10000 is a monolithic IC intended for use in applications requiring high linearity, such as Cellular Telephone Base Station Driver Amplifiers, CATV Fiber Receiver and Distribution Amplifiers, and CATV Drop Amplifiers. Offered in both a modified 16 lead SOIC package and SOT-89 package, it is well suited for use in amplifiers where small size, reduced component count, and high reliability are important. SOT-89 RF Output / BiasRF Input

2 Data Sheet - Rev 2.3 ADA10000 Figure 2: Pinout - S3 Package Table 1: Pin Description - S3 Package NIP EMAN NOITPIRCSED NIP EMAN NOITPIRCSED 1D NGd nuorG6 1D NGd nuorG 2D NGd nuorG5 1D NGd nuorG 3D NGd nuorG4 1F R TUO saiB/tuptuOFR 4D NGd nuorG3 1D NGd nuorG 5D NGd nuorG2 1D NGd nuorG 6F R NI tupnIFR1 1D NGd nuorG 7D NGd nuorG0 1D NGd nuorG 8D NGd nuorG9 D NGd nuorG GND RFOUT GND GND GND GND RFIN GND GND GND GND GND GND GND GND GND

Data Sheet - Rev 2.3 ADA10000 Figure 3: Pinout - S24 Package Table 2: Pin Description - S24 Package 2 31 RFIN RFOUTGND GND NIP EMAN NOITPIRCSED 1F R NI tupnIFR 2D NGd nuorG 3F R TUO saiB/tuptuOFR 4D NGd nuorG

4 Data Sheet - Rev 2.3 ADA10000

ELECTRICAL CHARACTERISTICS

Table 3: Absolute Minimum and Maximum Ratings Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. Table 4: Operating Ranges The device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defined in the electrical specifications. Notes: (1) RF input pin must be AC-coupled. No DC external bias should be applied. Notes: (1) Median time to failure will degrade above this temperature. RETEMARAP NIM XAM TINU ylppuS )41nip:egakcap3S( )3nip:egakcap42S( 02 1+C DV tupnItarewoPFR )6nip:egakcap3S( )1nip:egakcap42S( -0 1+m Bd erutarepmeTegarotS5 6-0 51+C ° RETEMARAP NIM PYT XAM TINU ycneuqerFtuptuO/tupnIFR0 5- 0 001z HM V(egatloVylppuS DD )4 +8 +9 +C DV erutarepmeTesaC0 4-- 5 8+ )1( C°

Data Sheet - Rev 2.3 ADA10000 Table 5: Electrical Specifications (TA = +25 °C, VDD = +8 VDC, 75 ΩΩΩΩΩ system, see Figures 4 and 5) Notes: (1) 160 channels, +17 dBmV per channel (measured at output), 6 MHz channel spacing. (2) 80 channels, +19 dBmV per channel (measured at output), 6 MHz channel spacing. (3) Two tones, -10 dBm per tone at input. (4) The device can be operated at V DD = +6 VDC for lower power dissipation. Refer to Figures 7, 8, 13, and 16 for performance variation with supply voltage. RETEMARAP NIM PYT XAM TINU TNEMMOC OSC )1( OSC/ )2( 26/06- - c Bd BTC )1( BTC/ )2( 47/56- - c Bd niaG4 15 1- B d erugiFesioN- 0 .25 .3B d tnioPtpecretnItupnIredrOdn2 )2PII( )3( 92+4 3+- m Bd tnioPtpecretnItupnIredrOdr3 )3PII( )3( 31+5 1+- m Bd ecnatsiseRlamrehT -

02 W/C° egakcap3S

noitpmusnoCtnerruC )4( 05- 0 51A m

Data Sheet - Rev 2.3 ADA10000 Figure 10: Unmatched Device Input Impedance S3 Packaged Device (T = +25 C, V = +8 V, 75 system)AD D o /c87

50 MHz

1 GHz

Figure 11: Unmatched Device Output Impedance S3 Packaged Device (T = +25 C, V = +8 V, 75 system)AD D o /c87 PERFORMANCE DATA 02468 1 0 1 2 Input Power (dBm) Output Power (dBm) Figure 9: Output Power vs. Input Power S3 Packaged Device (T = +25 C, V = +8 V, f = 500 MHz, 75 system)AD D o /c87 0 200 400 600 800 1000 Frequency (MHz) Gain (dB) 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Noise Figure (dB) Gain NF Figure 6: Gain and Noise Figure vs. Frequency - S3 Packaged Device (T = +25 C, V = +8 V, 75 system)AD D o /c87 15.0 15.2 15.4 15.6 15.8 16.0 456789 Supply Voltage (V) Gain (dB) 1.7 1.8 1.9 2.0 2.1 2.2 Noise Figure (dB) Gain NF Figure 7: Gain and Noise Figure vs. Supply Voltage - S3 Packaged Device (T = +25 C, f = 500 MHz, 75 system)A o /c87 456789 Supply Voltage (V) IIP2, IIP3 (dBm) IIP2 IIP3 Figure 8: IIP2 and IIP3 vs. Supply Voltage - S3 Packaged Device (T = +25 C, 75 system)A o /c87 Notes: 1. IIP2 measured at 986.5 MHz; Input = two tones at 55.25 MHz and 931.25 MHz at -10 dBm. 2. IIP3 measured with two tones at the input: 986.5 MHz and 992.5 MHz at -10 dBm. Refer to the ANADIGICS web site for full 2-port s-parameter data. As measured in test circuits shown in Figures 4 and 5.

Data Sheet - Rev 2.3 ADA10000 Refer to the ANADIGICS web site for full 2-port s-parameter data. 1G H z Figure 18: Unmatched Device Input Impedance S24 Packaged Device (T = +25 C, V = +8 V, 75 system)AD D o /c87 Figure 19: Unmatched Device Output Impedance S24 Packaged Device (T = +25 C, V = +8 V, 75 system)AD D o /c87

10 Data Sheet - Rev 2.3 ADA10000 PACKAGE OUTLINE HE e B 1 A B L a C LE 0.003 [0.076mm] GAUGE PLANE SEATING PLANE D 0.015 [0.38]X45 a L e E A D B L S O Y B M MILLIMETERSINCHES NOTE MAX.MIN.MAX.MIN. H LE C 0.020 0.500.330.013 0.10 1.47 0.25 1.730.068 0.010 0.058 0.004 0.055 0.065 1.65 1.40 0.250.200.0100.008 8080 6.205.740.2440.226 0.380 0.150 0.400 0.160 4.06 10.16 3.81 9.66 0.050 BSC 1.27 BSC 0.016 0.040 0.41 1.02 0.030 0.76 0.062 1.58 1.780.070 4. LEAD THICKNESS AFTER PLATING TO BE 0.013 [0.33mm] MAXIMUM. PER SIDE. 1. CONTROLLING DIMENSION: INCHES 2. DIMENSION "D" DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. MOLD FLASH, PROTRUSIONS AND GATE BURRS SHALL NOT EXCEED 0.006 [0.15mm] 3. DIMENSION "E" DOES NOT INCLUDE INTER-LEAD FLASH OR PROTRUSIONS. INTER-LEAD FLASH AND PROTRUSIONS SHALL NOT EXCEED 0.010 [0.25mm] PER SIDE. NOTES: Figure 20: S3 Package Outline - Modified 16 Pin SOIC

Data Sheet - Rev 2.3 ADA10000 Figure 21: S24 Package Outline - SOT-89

ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. IMPORTANT NOTICE ANADIGICS, Inc.

141 Mount Bethel Road

Warren, New Jersey 07059, U.S.A. Tel: +1 (908) 668-5000 Fax: +1 (908) 668-5132 URL: http://www.anadigics.com E-mail: Mktg@anadigics.com ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. Data Sheet - Rev 2.3 ADA10000

ORDERING INFORMATION

NOITPIRCSED GNIGAKCAPTNENOPMOC RTC3S00001ADAC °58+otC°04-C IOSniP61deifidoMl eeRdnaepaTeceip005,3 C3S00001ADAC °58+otC°04-C IOSniP61deifidoM) ebutrepseceip05(sebutcitsalP 1Q42S00001ADAC °58+otC°04-e gakcaP98-TOSl eeRdnaepaTeceip000,1