AD500-9-400M-TO5

AD500-9-400M-TO5 SENSORTECHNICS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

First Sensor APD Hybrid Series Data Sheet Part Description AD500-9-400M-TO5 US Order # 05-051-01, # 05-051-02 International Order # 50049001, # 50049002 PIN CIRCLE ACTIVE AREA: 0.196 mm (500 µm DIAMETER) PIN 2 PIN 1 5 PL Ø 0.46 4.2 PIN 4 PIN 3 Ø5.08 V BACKSIDE VIEW 113° VIEWING ANGLE Ø6.60 Ø8.3 2.2

7.6 MIN

+V BIAS 1.00 SQ Ø9.2 FEATURES DESCRIPTION APPLICATIONS

• ∅ 0.500 mm active area
• Low noise
• High gain
• Long term stability The AD500-9-400M-TO5 is an Avalanche Photodiode Amplifier Hybrid containing a 0.196 mm 2 active area APD chip integrated with an internal transimpedance amplifier. Hermetically packaged in a TO-5 with a borosilicate glass window cap.
• Lidar
• Analytical instruments
• Medical equipment ABSOLUTE MAXIMUM RATING SPECTRAL RESPONSE at M = 100 SYMBOL PARAMETER MIN MAX UNITS TSTG Storage Temp -55 +125 °C TOP Operating Temp 0 +60 °C TSOLDERING Soldering Temp - +240 °C P Power Dissipation - 360 mW Vcc Single Supply Voltage +3.0 +5.5 V Icc Supply Current - 63 mA ELECTRO-OPTICAL CHARACTERISTICS @ 23 °° °° C (V CC = single supply +3.3V, RL = 100 W unless otherwise specified) SYMBOL CHARACTERISTIC TEST CONDITIONS MIN TYP MAX UNITS ƒ -3dB Frequency Response -3dB @ 905 nm --- 400 --- MHz S Sensitivity* λ = 905 nm; M = 100 --- 145 --- mV/µW Icc Supply Current Dark state --- 34 63 mA * Sensitivity = APD responsivity (0.58 A/W X 100 gain) x TIA gain (2.5K) Use US order number 05-051-01, or International order number 50049001 for breakdown voltage range of 160-200 Volts. Use US order number 05-051-02, or International order number 50049002 for breakdown voltage range of 200-240 Volts. These devices are sensitive to electrostatic discharge. Please use ESD precautions when handling. Disclaimer: Due to our policy of continued development, specifications are subject to change without notice. 400 500 600 700 800 900 1000 1100 RESPONSIVITY (A/W) WAVELENGTH (nm) PIN 2 PIN 3 BIAS PIN 1 OUT+ OUT- PIN 4 CASE/GND PIN 5 CC (+5V) V AD500-9 HoR S COMPLIANT

AVALANCHE PHOTODIODE DATA @ 23 °° °°C SYMBOL CHARACTERISTIC TEST CONDITIONS MIN TYP MAX UNITS ID Dark Current M = 100 (see note 2) --- 0.8 5.0 nA C Capacitance M = 100 (see note 2) --- 1.2 --- pF VBR Breakdown Voltage (see note 1) I D = 2 µA 160 --- 240 V Temperature Coefficient of V BR 1.25 --- 1.55 V/K Responsivity M = 100; = 0 V; λ = 905 nm 52 58 60 A/W ∆ƒ 3dB Bandwidth -3dB --- 0.5 --- GHz tr Rise Time M = 100 --- 0.55 --- ns Optimum Gain 50 60 --- “Excess Noise” factor M = 100 --- 2.5 --- “Excess Noise” index M = 100 --- 0.2 --- Noise Current M = 100 --- 1.0 --- pA/Hz 1/2 Max Gain 200 --- --- NEP Noise Equivalent Power M = 100; λ = 905 nm --- 2.0 X 10 -14 --- W/Hz Note 1: The following different breakdown voltage ranges are available: (160 – 200 V), (200 – 240 V). Note 2: Measurement conditions: Setup of photo current 1 nA at M = 1 and irradiated by a 880 nm, 80 nm bandwidth LED. Increase the photo current up to 100 nA, (M = 100) by internal multiplication due to an increasing bias voltage. TRANSIMPEDANCE AMPLIFIER DATA @ 25 °° °°C (V cc = +3.0 V to 5.5 V, T A = 0° C to 70° C, 100 Ω load between OUT+ and OUT-. Typical values are at T A = 25° C, Vcc = +3.3 V) PARAMETER TEST CONDITIONS MIN TYP MAX UNITS Supply Voltage 3 5 5.5 V Supply Current --- 34 63 mA Transimpedance Differential, measured with 40 µA p- p signal 2.10 2.75 3.40 kΩ Output impedance Single ended per side 48 50 52 Ω Maximum Differential Output Voltage Input = 2 mA p-p with 100 Ω differential termination 220 380 575 mV p-p AC Input Overload 2 --- --- mA p-p DC Input Overload 1 --- --- mA Input Referred RMS Noise TO-5 package, see note 4 --- 490 668 nA Input Referred Noise Density See note 4 --- 11 --- pA/Hz 1/2 Small signal bandwidth Source capacitance = 0.85 pF , see note 3 1.525 2.00 --- GHz Low Frequency Cutoff -3 dB, input < 20 µA DC --- 30 --- kHz Transimpedance Linear Range Peak to peak 0.95 < lin earity < 1.05 40 --- --- µA p-p Power Supply Rejection Ratio (PSRR) Output referred, f < 2 MHz, PSSR = -20 Log ( ∆Vout / ∆Vcc) --- 50 --- dB Note 3: Source capacitance for AD500-9-400M-TO5 is the capacitance of APD. Note 4: Input referred noise is calculated as RMS output noise/ (gain at f = 10 Mhz). Noise density is (input referred noise)/ √bandwidth. TRANSFER CHARACTERISTICS The circuit used is an avalanche photodiode directly coupled to a high speed data handling transimpedance amplifier. The output of the APD (light generated current) is applied to the input of the amplifier. The amplifier output is in the form of a differential voltage pulsed signal. The APD responsivity curve is provided in Fig. 2. The term Amps/Watt involves the area of the APD and can be expressed as Amps/mm 2/Watts/mm 2, where the numerator applies to the current generated divided by the area of the detector, the denominator refers to the power of the radiant energy present per unit area. As an example assume a radiant input of 1 microwatt at 905 nm. The APD’s corresponding responsivity is 0.58 A/W. If energy in = 1 µW, then the current from the APD = (0.58 A/W) x (1x10 -6W) = 0.58 µA. We can then factor in the typical gain of the APD of 100, making the input current to the amplifier 58 µA. From Fig. 5 we can see the amplifier output will be approximately 100 mV p-p. APPLICATION NOTES The AD500-9-400M-TO5 is a high speed optical data receiver. It incorporates an internal transimpedance amplifier with an avalanche photodiode. This detector requires +3.5 V to +5.0 V voltage supply for the amplifier and a high voltage supply (100-240 V) for the APD. The internal APD follows the gain curve published for the AD500-9-TO52-S1 avalanche photodiode. The transimpedance amplifier provides differential output signals in the range of 200 millivolts differential. In order to achieve highest gain, the avalanche photodiode needs a positive bias voltage (Fig. 1). However, a current limiting resistor must be placed in series with the photodiode bias voltage to limit the current into the transimpedance amplifier. Failure to limit this current may result in permanent failure of the device. The suggested initial value for this limiting resistor is 390 KOhm. When using this receiver, good high frequency placement and routing techniques should be followed in order to achieve maximum frequency response. This includes the use of bypass capacitors, short leads and careful attention to impedance matching. The large gain bandwidth values of this device also demand that good shielding practices be used to avoid parasitic oscillations and reduce output noise.

Fig. 1: APD GAIN vs BIAS VOLTAGE Fig. 2: APD SPECTRAL RESPONSE (M = 1) 140 150 160 170 180 190 200 210 220 100 1000 APPLIED VOLTAGE (V) GAIN WAVELENGTH (nm) A/W 400 0.0 500 600 700 800 900 1000 1100 0.1 0.2 0.3 0.4 0.5 0.6 0.7 Fig. 3 : AMPLIFIER OUTPUT vs TEMPERATURE Fig.4 : APD CAPACITANCE vs BIAS VOLTAGE 200 AMBIENT TEMPERATURE (° C) AMPLITUDE (mV) 20 40 60 80 220 240 260 280 300 320 340 360 380 400 0 10 20 30 40 50 60 70 80 REVERSE BIAS (V) CAPACITANCE (pF) Fig. 5: AMPLIFIER TRANSFER FUNCTION Fig. 6: TOTAL FREQUENCY RESPONSE -100 -200 -100 -50 100 150 200 -75 0-50 -25 25 50 75 100 INPUT CURRENT (µA) DIFFERENTIAL OUTPUT VOLTAGE (mV p-p) -150 1M 10M 100M 400M 1G FREQUENCY (Hz) TRANSIMPEDANCE (db) USA: First Sensor, Inc.

5700 Corsa Avenue, #105

Westlake Village, CA 91362 USA T + 818 706-3400 F + 818 889-7053 contact.us@first-sensor.com www.first-sensor.com International sales: First Sensor AG Peter-Behrens-Str. 15

12459 Berlin, Germany

sales.opto@first-sensor.com www.first-sensor.com