ACPF-7141 AVAGO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 10

Technical content

Features

  • 50 Ω Input/Output
  • No external matching required
  • Low Insertion Loss, High Interference Rejection
  • Specifications guaranteed –20 °C to +85 °C
  • High Power Rating – +31 dBm Abs Max Input Power
  • Miniature Size – 2.0 × 1.6 mm Footprint – 0.90 mm Max Height
  • Environmental – RoHS 6 Compliant – Halogen free – TBBPA Free Specifications
  • Band 41 Insertion Loss ≤ 2.1 dB (Typ., 25 °C)
  • IEEE 802.11 b/g/n, Ch 1-13 Rejection ≥ 35 dB (Typ., 25 °C)

Electrical Specifications [1], Z0 = 50 Ω, TC [2] –20 °C to +85 °C, unless otherwise specified Symbol Parameter Units Min. Typ. [3] Max. S21 Insertion Loss, Band 41 dB 2496 – 2500 MHz (+25 °C) 2496 – 2500 MHz (–20 °C to –5 °C) 2496 – 2500 MHz (–5 °C to +85 °C) 2.8 3.9 3.7 2500 – 2520 MHz (+25 °C) 2500 – 2520 MHz (–20 °C to +85 °C) 2.4 3.3 3.8 2520 – 2680 MHz (+25 °C) 2520 – 2680 MHz (–20 °C to +85 °C) 2.0 3.0 3.2 2680 – 2690 MHz (+25 °C) 2680 – 2690 MHz (–20 °C to +85 °C) 2.2 3.6 3.8 S21 Attenuation, 0 – 699 MHz dB 35 76 S21 Attenuation, 699 – 916 MHz dB 35 56 S21 Attenuation, 916 – 1248 MHz dB 25 47 S21 Attenuation, 1248 – 1565 MHz dB 25 35 S21 Attenuation, 1565 – 1615 MHz dB 30 40 S21 Attenuation, 1615 – 1660 MHz dB 25 34 S21 Attenuation, 1660 – 1750 MHz dB 18 27 S21 Attenuation, 1750 – 2400 MHz dB 12 22 S21 Attenuation, Wi-Fi 802.11 b/g/n Band [4] 2401 – 2453 MHz ( Wi-Fi Ch 1–7) 2436 – 2468 MHz ( Wi-Fi Ch 8–10) 2451 – 2473 MHz ( Wi-Fi Ch 11) 2456 – 2478 MHz ( Wi-Fi Ch 12) 2461 – 2483 MHz ( Wi-Fi Ch 13) dB S21 Attenuation, 2750 – 2850 MHz dB 20 37 S21 Attenuation, 2850 – 3000 MHz dB 18 28 S21 Attenuation, 3000 – 4992 MHz dB 20 27 S21 Attenuation, 4992 – 5380 MHz dB 24 32 S21 Attenuation, 5380 – 7488 MHz dB 20 32 S21 Attenuation, 7488 – 8070 MHz dB 20 30 S11, S22 Return Loss (SWR), 2496 –2690 MHz dB 8 16 (1.4) (2.3) Notes: 2. T C is the case temperature and is defined as the temperature of the underside of the filter where it makes contact with the circuit board. 3. Typical data is the average value (arithmetic mean) of the parameter over the indicated band at +25 °C. 4. Wi-Fi Channel Average Attenuation, which is obtained by averaging |S21| over the center 19 MHz of the channels and converting to dB value.

Absolute Maximum Ratings [1] Parameter Unit Value Storage temperature °C –40 to +125 Maximum RF Input Power to Pin 1 (Tx) [2] dBm +31 Maximum DC Voltage, any Pin to Gnd or between Pins [3] VDC 0 Maximum Recommended Operating Conditions [4] Parameter Unit Value Operating temperature, Tc [5] °C –30 to +85 Notes: 1. Operation in excess of any one of these conditions may result in permanent damage to the device. 2. The ACPF-7141 is not symmetrical. Pin 1 is designed for higher power handling and is intended to be connected to the Tx blocks with Pin 2 connected to the system antenna. 3. Internal DC resistance of any port to ground or between ports is approximately a short circuit. 4. The device will function over the recommended range without degradation in reliability or permanent change in performance, but is not guaranteed to meet electrical specifications. 5. T C is defined as case temperature, the temperature of the underside of the filter where it makes contact with the circuit board. Applications Information The ACPF-7141 is not symmetrical. Pin 1 should be connected to the highest system power level (e.g., Tx block) and Pin 2 to the Antenna. The DC resistance from Pin 1 and Pin2 to Gnd is approximately zero. If either port is connected to adjacent components having a DC voltage present, blocking capacitors should be used.

Figure 9. Package Outline Drawing and Marking

  1. Dimensions in millimeters
  2. Tolerance, unless otherwise specified in drawing:
  3. Dimensions nominal. unless otherwise specified
  4. Contact areas are gold plated

2 ANT

3 Ground

Figure 7. S11 (Port 1, Tx), 3GPP Band 41 (2496 – 2690 MHz) Figure 8. S22 (Port 2, Ant), 3GPP Band 41 (2496 – 2690 MHz)

  1. Note: Land pattern only, RF ground vias not shown.

Figure 10. Landing Pad Figure 11. Typical Pad Construction

0.100 SETBACK, PINs 1, 2

0.055 SETBACK, PIN 3

0.045 LARGER/SIDE

0.015 PULL IN FROM LAND PAD

0.100 SETBACK, ALL SIDES

0.115 SETBACK, ALL SIDES

  1. Typical stencil thickness = 75 µm.

Figure 12. Solder Mask Figure 13. Solder Stencil

Figure 16. SMT Reel Drawing

For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2014 Avago Technologies. All rights reserved. AV02-4506EN - October 21, 2014 Package Moisture Sensitivity Feature Test Method Performance Moisture Sensitivity Level (MSL) at 260 °C JESD22-A113D Level 3 Figure 17. Verified SMT Solder Profile

6 February 2003

Ordering Information

Part Number No. of Devices Container ACPF-7141-BLK 100 Tape strip or Gel-Pack ACPF-7141-TR1 3000 7-inch (178 mm) Reel