ACMD-7614 AVAGO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 14

Technical content

Features

  • Miniature Size – 2.0 x 2.5 mm size – 0.95 mm maximum Height – Standard 2 x 2.5 mm PCB footprint
  • High Isolation enables elimination of interstage filter
  • High Power Rating – 31 dBm Abs Max Tx Power
  • Environmental – RoHS Compliant – Halogen free – TBBPA Free Specifications
  • Rx Band Performance, -20 to +85° C – Insertion Loss: 2.3 dB Max – Rx Noise Blocking: 50 dB Min
  • Tx Band Performance, -20 to +85° C – Insertion Loss: 2.0 dB Max – Tx Interferer Blocking: 53 dB Min

Applications

UMTS Handsets or data terminals oper ating in Band 1 frequency range. Ant Port 3 Rx Port 2 Tx Port 1

Min Max Min Typ [3] Max Min Max Antenna Port to Receive Port S23 Insertion Loss in Receive Channels [4] (2112.4 – 2167.6 MHz) dB 2.2 1.6 2.2 2.3 S22 Return Loss (SWR) of Receive Port in Receive Band (2110.48 – 2169.52 MHz) dB 9 (2.1) 9 14 (1.5) (2.1) 9 (2.1) S23 Attenuation, 10 – 1920 MHz dB 35 35 54 35 S23 Attenuation in Transmit Band (1920 – 1980 MHz) dB 48 48 61 48 S23 Attenuation in Bluetooth Band (2400 – 2483.5 MHz) dB 30 30 44 30 S23 Attenuation, 2484 – 3000 MHz dB 35 35 44 35 Transmit Port to Antenna Port S31 Insertion Loss in Transmit Channels [4] (1922.4 – 1977.6 MHz) dB 1.9 1.4 1.9 2.0 S11 Return Loss (SWR) of Transmit Port in Transmit Band (1920.48 – 1979.52 MHz) dB 9 (2.1) 9 17 (1.3) (2.1) 9 (2.1) S31 Attenuation, 10 – 1574 MHz dB 30 30 50 30 S31 Attenuation in GPS Band (1574.42 – 1576.42 MHz) dB 40 40 45 40 S31 Attenuation in Receive Band (2110 – 2170 MHz) dB 45 45 51 45 S31 Attenuation in Bluetooth Band (2400 – 2483.5 MHz) dB 28 28 32 28 S31 Attenuation in Transmit 2nd Harmonic Band (3840 – 3960 MHz) dB 28 28 37 28 S31 Attenuation in Transmit 3rd Harmonic Band (5760 – 5940 MHz) dB 14 14 23 14 Antenna Port S33 Return Loss (SWR) of Ant Port in Rx Band (2110 – 2170 MHz) dB 9 (2.1) 9 14 (1.5) (2.1) 9 (2.1) S33 Return Loss (SWR) of Ant Port in Tx Band (1920 – 1980 MHz) dB 9 (2.1) 9 19 (1.3) (2.1) 9 (2.1) Isolation Transmit Port to Receive Port S21 Tx-Rx Isolation in Receive Band (2110.48 – 2169.52 MHz) dB 50 50 57 50 S21 Tx-Rx Isolation in Transmit Band (1920.48 – 1979.52 MHz) dB 53 53 63 53 Notes: 1. T C is the case temperature and is defined as the temperature of the underside of the Duplexer where it makes contact with the circuit board. 2. Min/Max specifications are guaranteed at the indicated temperature with the input power to the Tx port equal to or less than +29 dBm over all Tx frequencies unless otherwise noted. 3. Typical data is the average value of the parameter over the indicated band at the specified temperature. Typical values may vary over time. 4. Integrated Insertion Loss over any 3.84 MHz channel within the band.

Absolute Maximum Ratings [1] Parameter Unit Value Storage temperature °C -65 to +125 Maximum RF Input Power to Tx Port dBm +31 Maximum Recommended Operating Conditions [2] Parameter Unit Value Operating temperature, TC [3], Tx Power ≤ 29 dBm °C -40 to +100 Operating temperature, TC [3], Tx Power ≤ 30 dBm °C -40 to +85 Notes: 1. Operation in excess of any one of these conditions may result in permanent damage to the device. 2. The device will function over the recommended range without degradation in reliability or permanent change in performance, but is not guaranteed to meet electrical specifications. 3. T C is defined as case temperature, the temperature of the underside of the duplexer where it makes contact with the circuit board.

Figure 20. Package Outline Drawing Figure 21. Pad Detail

0.15 X 45°

  1. Dimensions in millimeters
  2. Dimensions nominal unless otherwise noted
  3. Contact areas are gold plated

6 Ant

8 Gnd (Optional: Rx–)

Figure 22. Suggested PCB Layout need to be adjusted to retain a Zo of 50 ohms.

Figure 29. Product Marking and Pin Orientation Figure 27. Recommended Solder Mask Figure 28. Solder Mask Superposed on ACMD-7606

  1. Mask apertures match device pads 1:1

Figure 32. SMT Reel Drawing

  1. Reel shall be labeled with the following
  2. A certi/f_icate of compliance (c of c) shall
  3. Reel must not be made with or contain
  4. All dimensions in millimeters (mm)

For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2013 Avago Technologies. All rights reserved. AV02-2649EN - October 24, 2013 Package Moisture Sensitivity Feature Test Method Performance Moisture Sensitivity Level (MSL) at 260°C JESD22-A113D Level 3 0 50 100 150 200 250 300 Time, seconds 100 150 200 250 300Temperature, °C PROFILE.GRF PROFILE. WMF

6 February 2003

R. Waugh Tested profile shown. Figure 33. Verified SMT Solder Profile

Ordering Information

Part Number No. of Devices Container ACMD-7614-BLK 100 Tape Strip or Anti-static Bag ACMD-7614-TR1 3000 178 MM (7-inch) Reel