DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 14

Technical content

Features

/g120/g3Miniature Size – 2.0 x 2.5 mm Max size – 0.95 mm Max Height – Standard 2 x 2.5 mm PCB footprint /g120/g3High Power Rating – 31 dBm Abs Max Tx Power /g120/g3Environmental – RoHS Compliant – Halogen free – TBBPA Free Specifications /g120/g3Rx Band Performance, –20 to +85°C – Insertion Loss: 3.0 dB Max – Rx Noise Blocking: 50 dB Min /g120/g3Tx Band Performance, –20 to +85°C – Insertion Loss: 2.7 dB Max – Tx Interferer Blocking: 55 dB Min

Applications

Handsets or data terminals oper ating in the Band 8 frequency range. Ant Port 3 Rx Port 2 Tx Port 1

–20°C +25°C +85°C Min Typ [3] Max Min Typ [3] Max Min Typ [3] Max Antenna Port to Receive Port S23 Insertion Loss in Receive Channels [4] dB 3.0 2.2 3.0 3.0 S22 Return Loss (SWR) of Receive Port in Receive Band (1.9) (2.2) 8.5 (2.2) S23 Attenuation in Transmit Band (880 – 915 MHz) dB 45 45 55 45 S23 Attenuation, 0 – 835 MHz dB 28 28 32 28 S23 Attenuation, 835 – 870 MHz dB 30 30 32 30 S23 Attenuation, 1805 – 1875 MHz dB 35 35 37 35 S23 Attenuation in Bluetooth Band (2400 – 2483.5 MHz) dB 30 30 40 30 S23 Attenuation, 2685 – 2790 MHz dB 22 22 27 22 Transmit Port to Antenna Port S31 Insertion Loss in Transmit Channels [4] dB 2.7 2.2 2.7 2.7 S11 Return Loss (SWR) of Transmit Port in Transmit Band (1.9) (2.2) 8.5 (2.2) S31 Attenuation in Receive Band (925 – 960 MHz) dB 44 44 56 44 S31 Attenuation, 0 – 820 MHz dB 32 32 39 32 S31 Attenuation in GPS Rx Band (1574.42 – 1576.42 MHz) dB 27 27 30 27 S31 Attenuation in Transmit 2nd Harmonic Band (1760 – 1830 MHz) dB 25 25 30 25 S31 Attenuation in Bluetooth Band (2400 – 2483.5 MHz) dB 27 27 30 27 S31 Attenuation, 2640 – 2745 MHz dB 22 22 30 22 Antenna Port S33 Return Loss (SWR) of Ant Port in Rx Band (925 – 960 MHz) (1.9) S33 Return Loss (SWR) of Ant Port in Tx Band (880 – 915 MHz) (1.9) Isolation Transmit Port to Receive Port S21 Tx-Rx Isolation in Receive Band (925 – 960 MHz) dB 50 50 55 S21 Tx-Rx Isolation in Transmit Band (880 – 915 MHz) dB 52 52 60 Notes: 1. T C is the case temperature and is defined as the temperature of the underside of the Duplexer where it makes contact with the circuit board. 2. Min/Max specifications are guaranteed at the indicated tempera ture with the input power to the Tx port equal to or less than +29 dBm over all Tx frequencies unless otherwise noted. 3. Typical data is the average value of the parameter over the indica ted band at the specified temperature. Typical values may vary over time. 4. Integrated Insertion Loss over any 3.84 MHz channel within the band.

Absolute Maximum Ratings [1] Parameter Unit Value Storage temperature °C –65 to +125 Maximum RF Input Power to Tx Port dBm +31 Maximum Recommended Operating Conditions [2] Parameter Unit Value Operating temperature, TC [3], Tx Power ≤ 29 dBm °C –40 to +100 Operating temperature, TC [3], Tx Power ≤ 30 dBm °C –40 to +85 Notes: 1. Operation in excess of any one of these conditions may result in permanent damage to the device. 2. The device will function over the recommended range without degradation in reliability or permanent change in performance, but is not guaranteed to meet electrical specifications. 3. T C is defined as case temperature, the temperature of the underside of the duplexer where it makes contact with the circuit board.

  1. Dimensions in millimeters
  2. Dimensions nominal unless otherwise noted
  3. Contact areas are gold plated

Figure 22. Package Outline Drawing

6 Ant

8 Optional: Gnd, NC or Rx(–)

Figure 23. Pad Detail

0.05 X 45°

0.15 X 45°

Figure 24. Suggested PCB Layout need to be adjusted to retain a Zo of 50 ohms.

Figure 31. Product Marking and Pin Orientation Figure 29. Recommended Solder Mask Figure 30. Solder Mask Superposed on ACMD-7606

  1. Mask apertures match device pads 1:1

Figure 34. SMT Reel Drawing

  1. Reel shall be labeled with the following
  2. A certificate of compliance (c of c) shall
  3. Reel must not be made with or contain
  4. All dimensions in millimeters (mm)

For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2010 Avago Technologies. All rights reserved. AV02-2362EN - February 25, 2010 Package Moisture Sensitivity Feature Test Method Performance Moisture Sensitivity Level (MSL) at 260°C JESD22-A113D Level 3 0 50 100 150 200 250 300 Time, seconds 100 150 200 250 300Temperature, °C PROFILE.GRF PROFILE. WMF

6 February 2003

R. Waugh Tested profile shown. Figure 35. Verified SMT Solder Profile

Ordering Information

Part Number No. of Devices Container ACMD-7606-BLK 100 Anti-static Bag ACMD-7606-TR1 3000 7-inch Reel