ACMD-7403_15 AVAGO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

Features

  • Miniature Size
  • 3.0 x 3.0 mm Max footprint
  • 1.2 mm Max height
  • High Power Rating
  • 33 dBm Abs Max Tx Power
  • Lead-Free Construction Specifications
  • Rx Band Performance, 1930.5-1989.5 MHz, – 30 to +85°C
  • Rx Noise Blocking: 44 dB min
  • Insertion Loss: 3.2 dB max
  • Tx Band Performance, 1850.5-1909.5 MHz, – 30 to +85°C
  • Tx Interferer Blocking: 52 dB min
  • Insertion Loss: 2.7 dB max

Applications

Handsets or data terminals operating in the PCS (A–F) frequency band. Functional Block Diagram

– 30°C +25°C +85°C Min Typ Max Min Typ Max Min Typ Max Antenna Port to Receive Port S23 Insertion Loss in Receive Band 1930.5 – 1931.5 MHz 1931.5 – 1989.5 MHz dB 3.2 3.0 1.9 1.3 3.1 3.0 3.0 3.2 ∆S23 Ripple (p-p) in Receive Band dB 1.7 S22 Return Loss of Receive Port in Receive Band dB 9.5 9.5 15 9.5 S23 Attenuation in Transmit Band (1850.5 – 1909.5 MHz) dB 52 52 59 52 S23 Attenuation 0 – 1600 MHz dB 20 29 S23 Attenuation in Receive 2nd Harmonic Band (3861 – 3979 MHz) dB 14 18 Transmit Port to Antenna Port S31 Insertion Loss in Transmit Band 1850.5 – 1908.5 MHz 1908.5 – 1909.5 MHz dB 2.5 2.5 1.0 1.4 2.1 2.3 2.5 2.7 ∆S31 Ripple (p-p) in Transmit Band dB 1.3 S11 Return Loss of Transmit Port in Transmit Band dB 9.5 9.5 20 9.5 S31 Attenuation in Receive Band (1930.5 – 1989.5 MHz) dB 40 40 49 40 S31 Attenuation 0 – 1600 MHz dB 22 32 S31 Attenuation in GPS Rx Band (1574.42 – 1576.42 MHz) dB 23 27 S31 Attenuation in Transmit 2nd Harmonic Band (3701 – 3819 MHz) dB 5 9 Antenna Port S33 Return Loss of Antenna Port in Receive Band (1930.5 – 1989.5 MHz) dB 9 9 16 9 S33 Return Loss of Antenna Port in Transmit Band (1850.5 – 1909.5 MHz) dB 9 9 17 9 Isolation Transmit Port to Receive Port S21 Tx-Rx Isolation in Receive Band (1930.5 – 1989.5 MHz) dB 44 44 51 44 S21 Tx-Rx Isolation in Transmit Band (1850.5 – 1909.5 MHz) dB 54 54 61 54 Notes: TC is the case temperature and is defined as the temperature of the underside of the Duplexer where it makes contact with the circuit board. Min/Max specifications are guaranteed at the indicated temperature with the input power to the Tx ports equal to or less than +29 dBm over all Tx frequencies unless otherwise noted. Typical data is the average value of the parameter over the indicated band at the specified temperature. Typical values may vary over time.

  1. Operation in excess of any one of these conditions may result in

permanent damage to the device.

  1. The device will function over the recommended range without

is not guaranteed to meet electrical specifications.

  1. TC is defined as case temperature, the temperature of the underside

of the duplexer where it makes contact with the circuit board. which the device under test (DUT) is solder-attached. to ACP probe patterns on the board. network analyzer and calibrated ACP probe set. Figure 1. ACP Probe Test Circuit. Figure 2. Test Circuit with Duplexer.