ACMD-7402 AVAGO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 10

Technical content

Features

  • Miniature size - 3.8 x 3.8 mm footprint size - 1.3 mm max height
  • High power rating size - +33 dBm max Tx power
  • Lead-free construction Specifications
  • Performance guaranteed –30 to +85 °C
  • Rx band performance (1930.5 – 1989.5 mHz) size - Insertion loss: 3.8 dB max size - Noise blocking: 43 dB min
  • Tx band performance (1850.5 – 1909.5 mHz) size - Insertion loss: 3.5 dB max size - Interferer blocking: 52 dB min

Applications

  • Handsets or data terminals operating in the US PCS frequency band ACMD-7402 Miniature PCS Band Duplexer Data Sheet Functional Block Diagram Tx PORT 1 Rx PORT 2 ANT PORT 3

Symbol Parameter Units Min Typ [3] Max Min Typ [3] Max Min Typ [3] Max Antenna Port to Receive Port S23 Insertion Loss in Receive Band dB 3.8 1.5 3.5 3.5 (1930.5 – 1989.5 MHz) ∆S23 Ripple (p-p) in Receive Band dB 3.0 1.5 2.6 2.6 S22 Return Loss of Receive Port dB 9.5 9.5 17 9.5 in Receive Band S23 Attenuation in Transmit Band dB 52 52 56 52 (1850.5 – 1909.5 MHz) S23 Attenuation 0 – 1600 MHz dB 20 31 S23 Attenuation in Receive 2 nd dB 18 19 Harmonic Band (3861 – 3979 MHz) Transmit Port to Antenna Port S31 Insertion Loss in Transmit Band dB 3.0 1.1 3.0 3.5 [4] (1850.5 – 1909.5 MHz) ∆S31 Ripple (p-p) in Transmit Band dB 2.3 0.9 2.3 2.8 S11 Return Loss of Transmit Port dB 9.5 9.5 20 9.5 in Transmit Band S31 Attenuation in Receive Band dB 43 43 48 43 (1930.5 – 1989.5 MHz) S31 Attenuation 0 – 1600 MHz dB 22 34 S31 Attenuation in Transmit 2 nd dB 8 13 Harmonic Band (3701 – 3819 MHz) Antenna Port S33 Return Loss of Antenna Port in dB 9 9 16 9 Receive Band (1930.5 – 1989.5 MHz) S33 Return Loss of Antenna Port in dB 9 9 19 9 Transmit Band (1850.5 – 1909.5 MHz) Isolation Transmit Port to Receive Port S21 Tx-Rx Isolation in Receive Band dB 45 45 48 45 (1930.5 – 1989.5 MHz) S21 Tx-Rx Isolation in Transmit Band dB 54 54 58 54 (1850.5 – 1909.5 MHz) Notes: 1. T C is the case temperature and is defined as the temperature of the underside of the Duplexer where it makes contact with the cir cuit board. 2. Min/Max specifications are guaranteed at the indicated temperature with the input power to the Tx ports equal to or less than +29 dBm over all Tx frequencies unless otherwise noted. 3. Typical data is the average value of the parameter over the indicated band at the specified temperature. Typical values may v ary over time. Refer to “Characterization” section for measurement details. 4. At Tx input power between +26 dBm and +29 dBm, the Insertion Loss at the upper edge of the Tx band (1907– 1909.5 MHz) will be slightly degraded. From 1907 to 1909.5 MHz, the maximum Insertion Loss specification at Tc = +85 °C is guaranteed to +26 dBm input power.

  1. Operation in excess of any one of these conditions may result in

permanent damage to the device.

  1. The device will function over the recommended range without

but is not guaranteed to meet electrical specifications. used to test semiconductor wafers. to the ACP probe patterns on the board. Figure 1. ACP probe test circuit Figure 2. Test circuit with ACMD-7402 duplexer

For product information and a complete list of distributors, please go to our website: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries . Data subject to change. Copyright © 2006 Avago Technologies Pte. All rights reserved. AV01-0261EN July 12, 2006

Ordering Information

Part Number No. of Devices Container ACMD-7402-BLK 25 Anti-static Bag ACMD-7402-TR1 1000 7-inch Reel