DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 14

Technical content

Features

/g120/g3Miniature Size – 2.0 x 2.5 mm Max size – 0.95 mm Max Height – Standard 2 x 2.5 mm PCB footprint /g120/g3High Isolation /g120/g3High Power Rating – 33 dBm Abs Max Tx Power /g120/g3Environmental – RoHS Compliant – Halogen free – TBBPA Free Specifications /g120/g3Rx Band Performance, 2620-2690 MHz, –20 to +85°C – Insertion Loss: 2.5 dB Max – Rx Noise Blocking: 50 dB Min /g120/g3Tx Band Performance, 2500-2570 MHz, –20 to +85°C – Insertion Loss: 2.1 dB Max – Tx Interferer Blocking: 55 dB Min

Applications

LTE Handsets or data terminals oper ating in the Band 7 frequency range. Ant Port 3 Rx Port 2 Tx Port 1

–20°C +25°C +85°C Min Typ [3] Max Min Typ [3] Max Min Typ [3] Max Antenna Port to Receive Port S23 Insertion Loss in Receive Band (2620 – 2690 MHz) dB 2.5 1.6 2.5 2.5 S22 Return Loss (SWR) of Receive Port in Receive Band (2620 – 2690 MHz) (1.3) (2.0) 9.5 (2.0) S23 Attenuation in Transmit Band (2500 – 2570 MHz) dB 45 45 57 45 S23 Attenuation, 1 – 2380 MHz dB 30 30 32 30 S23 Attenuation, 2380 – 2450 MHz dB 35 35 48 35 S23 Attenuation, 2450 – 2484 MHz dB 35 35 51 35 S23 Attenuation, 2775 – 6000 MHz dB 20 20 38 20 Transmit Port to Antenna Port S31 Insertion Loss in Transmit Band (2500 – 2570 MHz) dB 2.0 1.8 2.0 2.1 S11 Return Loss (SWR) of Transmit Port in Transmit Band (2500 – 2570 MHz) dB 10 (1.9) 10 18 (1.3) (1.9) 10 (1.9) S31 Attenuation in Receive Band (2620 – 2690 MHz) dB 45 45 58 45 S31 Attenuation, 10 – 1574 MHz dB 30 30 42 30 S31 Attenuation in GPS Rx Band (1574.42 – 1576.42 MHz) dB 45 45 57 45 S31 Attenuation, 1577 – 1680 MHz dB 25 25 50 25 S31 Attenuation, 1845 – 1880 MHz dB 30 30 42 30 S31 Attenuation, 2110 – 2170 MHz dB 30 30 34 30 S31 Attenuation, 2400 – 2450 MHz dB 30 30 57 30 S31 Attenuation in Transmit nd Harmonic Band (5000 – 5140 MHz) dB 20 20 39 20 S31 Attenuation, 5150 – 5850 MHz dB 20 20 35 20 S31 Attenuation, 7500 – 7710 MHz dB 20 20 37 20 Antenna Port S33 Return Loss (SWR) of Ant Port in Rx Band (2620 – 2690 MHz) dB 10 (1.9) 10 18 (1.3) (1.9) 10 (1.9) S33 Return Loss (SWR) of Ant Port in Tx Band (2500 – 2570 MHz) dB 10 (1.9) 10 16 (1.3) (1.9) 10 (1.9) Isolation Transmit Port to Receive Port S21 Tx-Rx Isolation in Receive Band (2620 – 2690 MHz) dB 50 50 58 50 S21 Tx-Rx Isolation in Transmit Band (2500 – 2570 MHz) dB 55 55 61 55 Notes: 1. T C is the case temperature and is defined as the temperature of the underside of the Duplexer where it makes contact with the circuit board. 2. Min/Max specifications are guaranteed at the indicated tempera ture with the input power to the Tx ports equal to or less than +29 dBm over all Tx frequencies unless otherwise noted. 3. Typical data is the average value of the parameter over the indica ted band at the specified temperature. Typical values may vary over time.

Absolute Maximum Ratings [1] Parameter Unit Value Storage temperature °C –65 to +125 Maximum RF Input Power to Tx Port dBm +33 Maximum Recommended Operating Conditions [2] Parameter Unit Value Operating temperature, TC [3], Tx Power ≤ 29 dBm, CW °C –40 to +100 Operating temperature, TC [3], Tx Power ≤ 30 dBm, CW °C –40 to +85 Notes: 1. Operation in excess of any one of these conditions may result in permanent damage to the device. 2. The device will function over the recommended range without degradation in reliability or permanent change in performance, b ut is not guaranteed to meet electrical specifications. 3. T C is defined as case temperature, the temperature of the underside of the duplexer where it makes contact with the circuit board.

  1. Dimensions in millimeters
  2. Dimensions nominal unless otherwise noted
  3. Contact areas are gold plated

Figure 23. Package Outline Drawing.

6 Ant

8 Optional: Gnd, NC or Rx(–)

Figure 24. Pad Detail.

0.05 X 45°

0.15 X 45°

Figure 25. Suggested PCB Layout. need to be adjusted to retain a Zo of 50 ohms.

Figure 32. Product Marking and Pin Orientation. Figure 30. Recommended Solder Mask. Figure 31. Solder Mask Superposed on ACMD-6007.

  1. Mask apertures match device pads 1:1

Figure 35. SMT Reel Drawing.

  1. Reel shall be labeled with the following
  2. A certificate of compliance (c of c) shall
  3. Reel must not be made with or contain
  4. All dimensions in millimeters (mm)

For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2010 Avago Technologies. All rights reserved. AV02-2568EN - July 5, 2010 Package Moisture Sensitivity Feature Test Method Performance Moisture Sensitivity Level (MSL) at 260°C JESD22-A113D Level 3 0 50 100 150 200 250 300 Time, seconds 100 150 200 250 300Temperature, °C PROFILE.GRF PROFILE. WMF

6 February 2003

R. Waugh Tested profile shown. Figure 36. Verified SMT Solder Profile.

Ordering Information

Part Number No. of Devices Container ACMD-6007-BLK 100 Anti-static Bag ACMD-6007-TR1 3000 178 mm (7-inch Reel