4532F FPE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

http://www.fpe.com.cn4532F Series Series 1、Features  Operating temperature -40℃~150℃  Suitable for lead-free reflow soldering  Compliance with RoHS and Halogen Free  Bifilar winding  AEC-Q200 qualified 2、Application  Used radiation noise suppression for automotive CAN-BUS / Flex Ray systems  Used for Industrial field bus systems 3、外形尺寸 SHAPES AND DIMENSIONS (Unit:mm) 4、电路图 Schematic Diagram Series A B C D1 D2

http://www.fpe.com.cn 5、电性规格 Specification 6、焊接和安装 Soldering and Mounting 6-1. Soldering

6.2 Solder re-flow:

6.3 Soldering Iron(Figure 2):

7、包装信息 Packaging Information Part Number Inductance(uH) [100kHz/0.1V] -30% / +50% DC Resistance (Ω)Max. Common mode Impedance (Ω) [Test Frequency 100MHz] Rated Current (mA) Rated Volt. (Vdc) Withstand Volt. (Vdc) max. IR(Ω) min. AC4532F-110L 11 0.6 600TYP 250 50 125 10M AC4532F-220L 22 1.0 1200 TYP 200 50 125 10M AC4532F-510L 51 1.0 2800 TYP 200 50 125 10M AC4532F-101L 101 2.0 5800 TYP 150 50 125 10M AC4532F-201L 201 4.5 / 110 50 125 10M Series Chip/Reel Carton 4532F 2500 25000 Recommended temperature profiles for re-flow soldering in Figure 1. Mildly activated rosin fluxes are preferred. FPE terminations are suitable for all wave and re-flow soldering systems. If hand soldering cannot be avoided, the preferred technique is the utilization of hot air soldering tools. Products attachment with a soldering iron is discouraged due to the inherent process control limitations. In the event that a soldering iron must be employed the following precautions are recommended. ‧Preheat circuit and products to 150℃ ‧Never contact the ceramic with the iron tip ‧Use a 20 watt soldering iron with tip diameter of 1.0mm ‧350℃ tip temperature (max) ‧1.0mm tip diameter (max) ‧Limit soldering time to 4~5 sec.