AAA3528SEKJ3ZGKQBKS TO-GRACE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Features

SMT assembly and solder process. z Available on tape and reel. z Package: 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Packag e Dimensions Not es: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. 香港至恩科技有限公司 www.to-grace.com 公司授权代理销售LITE-ON:光耦，贴片LED灯等 进口原装，现货供应，价格优势，技术支持 电话：0755-83464948 传真：0755-83464076 A ll data sheet.com

SPEC NO: DSAO2423 REV NO: V.1B DATE: APR/09/2015 PAGE: 2 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1201008886 Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly Orangeuces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might lead to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. 3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry. 4.1. The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. 4.2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup. 4.3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production. 5. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances. A ll data sheet.com

SPEC NO: DSAO2423 REV NO: V.1B DATE: APR/09/2015 PAGE: 3 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1201008886 Selection Guide Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Electrical / Optical Characteristics at TA=25°C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 2 θ1/2 AAA3528SEKJ3ZGKQBKS Water Clear 120° Hyper Red (AlGaInP) 400 500 Green (InGaN) 400 600 Blue (InGaN) 80 200 Symbol Parameter Device Typ. Max. Units Test Conditions λpeak Peak Wavelength Hyper Red Green Blue 640 515 460 nm I F=20mA λD [1] Dominant Wavelength Hyper Red Green Blue 625 525 465 nm I F=20mA Δλ1/2 Spectral Line Half-width Hyper Red Green Blue nm I F=20mA C Capacitance Hyper Red Green Blue 100 pF V F=0V;f=1MHz VF [2] Forward Voltage Hyper Red Green Blue 2.2 3.3 3.3 2.8 4.1 V I F=20mA IR Reverse Current Hyper Red Green Blue uA V R=5V Parameter Hyper Red Green Blue Units Power dissipation 140 123 120 mW DC Forward Current 50 30 30 mA Peak Forward Current [1] 150 150 150 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. 4. Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. A ll data sheet.com

SPEC NO: DSAO2423 REV NO: V.1B DATE: APR/09/2015 PAGE: 4 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1201008886 AAA3528SEKJ3ZGKQBKS Hyper Red A ll data sheet.com

SPEC NO: DSAO2423 REV NO: V.1B DATE: APR/09/2015 PAGE: 5 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1201008886 Green A ll data sheet.com

SPEC NO: DSAO2423 REV NO: V.1B DATE: APR/09/2015 PAGE: 6 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1201008886 Blue A ll data sheet.com

SPEC NO: DSAO2423 REV NO: V.1B DATE: APR/09/2015 PAGE: 7 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1201008886 AAA3528SEKJ3ZGKQBKS Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) A ll data sheet.com

SPEC NO: DSAO2423 REV NO: V.1B DATE: APR/09/2015 PAGE: 8 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1201008886 PACKING & LABEL SPECIFICATIONS AAA3528SEKJ3ZGKQBKS Terms and conditions for the usage of this document 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the produc t is being operated within the environmental and electrical limits specified in the dat asheet. If customer usage exceeds the spec ified limits, Kingbright will not be respon sible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applicati ons. If customer's application ha s special reliability requirements or have life-threatening liabilities, such as automotive or m edical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes A ll data sheet.com