AA4040VRBXZ1S-A-2A

AA4040VRBXZ1S-A-2A TO-GRACE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

© 20 17 Kingbright. All Rights Reserved. Spec No: DSAP1125 / 1201008976 Rev No: V.2B Date: 12/22/2017 Page 1 / 6 Part Number Emitti ng Color (Material) I v (mcd) @ 20mA [ 2] Vie wing Angle [1 Code. Min. Max. 2θ1/2 AA4040VRBXZ1 S/A-2A ■ Blue (InGaN T 700 1000 120° U 1000 1300 V 1300 1600 W 1600 1900 DESCRIP TIONS z T he source color devices are made with InGaN Light Emitting Diode z Electrostatic discharge and power surge could damage the LEDs z It is recommend ed to use a wrist band or anti-electrostatic glove when handling the LEDs z All d evices, equipments and machineries must be electrically grounded

FEATURES

le for all SMD assembly and solder process z Availa ble on tape and reel z Ideal for bac klighting z Packa ge: 500 pcs / reel z Moistur e sensitivity level: 2a z Ro HS compliant APPLIC ATIONS z T raffic signaling z Ba cklighting (illuminated advertising , general lighting) z Int erior and exterior automotive lighting z S ubstitution of micro incandescent lamps z Rea ding lamps z Si gnal and symbol luminaire for orientation z Ma rker lights (e.g. Steps, exit ways, etc) z D ecorative and entertainment lighting z Indoo r and outdoor commercial and residential arc hitectural lighting ATTE NTION Ob serve precautions for handling electrostatic discharge sensitive devices PACKAGE DI MENSIONS SELECTION GUIDE AA4040VR BXZ1S/A-2A 4.0 x 4.0 mm Right Angle Surface Mount LED Lamp RECOMMENDED SOLDERING PATTERN (units : mm ; tolerance : ± 0.1) Notes: θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Notes: All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. 香港至恩科技有限公司 www.to-grace.com 公司授权代理销售LITE-ON:光耦，贴片LED灯等 进口原装，现货供应，价格优势，技术支持 电话：0755-83464948 传真：0755-83464076 A ll data sheet.com

© 2017 Kingbright. All Rights Reserved. Spec No: DSAP1125 / 1201008976 Rev No: V.2B Date: 12/22/2017 Page 2 / 6 ABSOLUTE MAXIMUM RATINGS at TA=25°C ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C AA4040VRBXZ1S/A-2A Parameter Symbol Unit Power Dissipation PD 120 mW Reverse Voltage VR 5 V Junction Temperature Tj 100 °C Operating Temperature Top -40 to +100 °C Storage Temperature Tstg -40 to +110 °C DC Forward Current IF 30 mA Peak Forward Current IFM [1] 100 mA Thermal Resistance (Junction / Ambient) Rth JA [2] 285 °C/W Thermal Resistance (Junction / Solder point) Rth JS [2] 205 °C/W Value Electrostatic Discharge Threshold (HBM) - 8000 V Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Rth JA ,Rth JS Results from mounting on PC board FR4 (pad size ≥ 16 mm 2 per pad). 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Parameter Symbol Emitting Color Value Unit Typ. Max. Chromaticity Coordinates x IF = 20mA x [1] Blue 0.21 - - Chromaticity Coordinates y I F = 20mA y [1] Blue 0.20 - - Capacitance C Blue 100 - pF Forward Voltage IF = 20mA VF [2] Blue 3.3 4.0 V Reverse Current (VR = 5V) IR Blue - 50 uA Temperature Coefficient of x IF = 20mA, -10°C ≤ T ≤ 100°C TCx Blue -0.03 - 10-3/°C Temperature Coefficient of y I F = 20mA, -10°C ≤ T ≤ 100°C TCy Blue -0.10 - 10-3/°C Temperature Coefficient of VF IF = 20mA, -10°C ≤ T ≤ 100°C TCV Blue -2.0 - mV/°C Notes: 1. Measurement tolerance of the chromaticity coordinates is ±0.01. 2. Forward voltage: ±0.1V. 3. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. A ll data sheet.com

© 2017 Kingbright. All Rights Reserved. Spec No: DSAP1125 / 1201008976 Rev No: V.2B Date: 12/22/2017 Page 3 / 6 0.1 100 Ta = 25 °C Forward voltage (V) Forward current (mA) 0.01 0.1 11 0 1 0 0 Ta = 25 °C Forward current (mA) Luminous intensity normalised at 20 mA - 4 0 - 2 0 0 2 04 06 08 0 1 0 0 Ambient temperature (°C) Permissible forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 - 4 0 - 2 00 2 04 06 08 0 1 0 0 Ambient temperature (°C) Luminous intensity normalised at T a = 25 °C TECHNICAL DATA BLUE 0.5 0.50.0 -90° -75° -60° -45° -30° -15° 75° 60° 45° 30° 0° 15° 90° 1.0 1.0 Ta = 25 °C SPATIAL DISTRIBUTION AA4040VRBXZ1S/A-2A Forward Current vs. Forward Voltage Luminous Intensity vs. Forward Current Forward Current Derating Curve Luminous Intensity vs. Ambient Temperature x y BLB1 0.2123 0.2364 0.2053 0.2158 0.2240 0.2086 0.2310 0.2286 BLB2 0.2053 0.2158 0.1985 0.1960 0.2173 0.1893 0.2240 0.2086 BLB3 0.1985 0.1960 0.1920 0.1769 0.2109 0.1707 0.2173 0.1893 Notes: Shipment may contain more than one chromaticity regions. Orders for single chromaticity region are generally not accepted. Measurement tolerance of the chromaticity coordinates is ±0.01. CIE CHROMATICITY DIAGRAM 0.12 0.14 0.16 0.18 0.20 0.22 0.24 0.26 0.28 x y BLB1 BLB2 BLB3 A ll data sheet.com

© 2017 Kingbright. All Rights Reserved. Spec No: DSAP1125 / 1201008976 Rev No: V.2B Date: 12/22/2017 Page 4 / 6 TAPE SPECIFICATIONS (units : mm) REEL DIMENSION (units : mm) REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. AA4040VRBXZ1S/A-2A HANDLING PRECAUTIONS Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might lead to damage and premature failure of the LED. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 3. As silicone encapsulation is permeable to gases, some corrosive substances such as H 2S might corrode silver plating of lead frame. Special care should be taken if an LED with silicone encapsulation is to be used near such substances. A ll data sheet.com

© 2017 Kingbright. All Rights Reserved. Spec No: DSAP1125 / 1201008976 Rev No: V.2B Date: 12/22/2017 Page 5 / 6 RELIABILITY TEST ITEMS AND CONDITIONS The reliability of products shall be satisfied with items listed below LOT TOLERANCE PERCENT DEFECTIVE (LTPD) : 10% No. Test Item Standards Test Condition Test Times / Cycles Number of Damaged

1 Continuous operating test - Ta = 25°C, IF = maximum rated current * 1,000 h 0 / 22

2 High Temp. operating test EIAJ ED-4701/100(101) Ta = 100°C, IF = derated current at 100°C 1,000 h 0 / 22 3 Low Temp. operating test - Ta = -40°C, IF = maximum rated current * 1,000 h 0 / 22 4 High temp. storage test EIAJ ED-4701/100(201) Ta = maximum rated storage temperature 1,000 h 0 / 22 5 Low temp. storage test EIAJ ED-4701/100(202) Ta = -40°C 1,000 h 0 / 22 6 High temp. & humidity storage test - Ta = 60°C, RH = 90% 500 h 0 / 22 7 High temp. & humidity operating test - Ta = 60°C, RH = 90% IF = derated current at 60°C 500 h 0 / 22

8 Soldering reliability test EIAJ ED-4701/100(301)

Moisture soak: 30°C, 70% RH, 72h Preheat: 150~180°C (120s max.) Soldering temp: 260°C(10s) 2 times 0 / 18

9 Thermal shock operating test - Ta = -40°C(15min) ~ 100°C(15min)

IF = derated current at 100°C 1,000 cycles 0 / 22

10 Thermal shock test - Ta = -40°C(15min) ~ 100°C(15min) 1,000 cycles 0 / 22

11 Electric Static Discharge (ESD) EIAJ ED-4701/100(304) C = 100pF, R2 = 1.5KΩ V = 8000V Once each Polarity 0 / 22

12 Vibration test - a = 196m/s², f = 100~2KHz, t = 48min for all xyz axes 4 times 0 / 22

• : Refer to forward current vs. derating curve diagram AA4040VRBXZ1S/A-2A CRITERIA FOR JUDGING DAMAGE Items Symbols Conditions Failure Criteria luminous Intensity lV IF = 20mA Testing Min. Value < Spec. Min. Value x 0.5 Forward Voltage VF IF = 20mA Testing Max. Value ≥ Spec. Max. Value x 1.2 Reverse Current IR VR = Maximum Rated Reverse Voltage Testing Max. Value ≥ Spec. Max. Value x 2.5 High temp. storage test - - Occurrence of notable decoloration, deformation and cracking A ll data sheet.com

© 2017 Kingbright. All Rights Reserved. Spec No: DSAP1125 / 1201008976 Rev No: V.2B Date: 12/22/2017 Page 6 / 6 PRECAUTIONARY NOTES 1. The information included in this document reflects representative usage scenarios and is intended for technical reference on ly. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes AA4040VRBXZ1S/A-2A PRECAUTIONARY NOTES 1. The information included in this document reflects representative usage scenarios and is intended for technical reference on ly. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes PACKING & LABEL SPECIFICATIONS A ll data sheet.com