AA2214QBS-D-AMT

AA2214QBS-D-AMT TO-GRACE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

© 20 19 Kingbright. All Rights Reserved. Spec No: DSAL4009 / 1201007405 Rev No: V.4B Date: 01/09/2019 Page 1 / 5 DESCRIP TIONS z T he Blue source color devices are made with InGaN Light Emitting Diode z Electrostatic discharge and power surge could damage the LEDs z It is recommend ed to use a wrist band or anti-electrostatic glove when handling the LEDs z All d evices, equipments and machineries must be electrically grounded

FEATURES

z 2.2 mm x 1.4 mm, 1.3 mm high z Lo w power consumption z Availa ble on tape and reel z Packag e: 2000 pcs / reel z Moisture se nsitivity level: 3 z RoHS comp liant APPLIC ATIONS z T raffic signaling z Ba cklighting (illuminated advertising , general lighting) z Int erior and exterior automotive lighting z S ubstitution of micro incandescent lamps z Rea ding lamps z Si gnal and symbol luminaire for orientation z Ma rker lights (e.g. Steps, exit ways, etc) z D ecorative and entertainment lighting z Indoo r and outdoor commercial and residential arc hitectural lighting ATTE NTION Ob serve precautions for handling electrostatic discharge sensitive devices PACKAGE DI MENSIONS SELECTION GUIDE AA2214QB S/D-AMT 2.2 x 1.4 mm Surface Mount LED Lamp RECOMMENDED SOLDERING PATTERN (units : mm ; tolerance : ± 0.1) Part Number Emitti ng Color (Material) Lens T ype I v (mcd) @ 20mA [ 2] Vie wing Angle [1 Code. Min. Max. 2θ1/2 AA2214QBS/D -AMT ■ Blue (InGaN ) Water Clear M 80 120 120° N 120 200 P 200 300 Notes: θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Notes: All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. 香港至恩科技有限公司 www.to-grace.com 公司授权代理销售LITE-ON:光耦，贴片LED灯等 进口原装，现货供应，价格优势，技术支持 电话：0755-83464948 传真：0755-83464076 A ll data sheet.com

© 2019 Kingbright. All Rights Reserved. Spec No: DSAL4009 / 1201007405 Rev No: V.4B Date: 01/09/2019 Page 2 / 5 ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C AA2214QBS/D-AMT Notes: 1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. ) 2. Forward voltage: ±0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Parameter Symbol Emitting Color Value Unit Min. Typ. Max. Wavelength at Peak Emission IF = 20mA λpeak Blue - 460 - nm Dominant Wavelength IF = 20mA λdom [1] Blue 463 - 466 466 - 469 469 - 471 471 - 473 Spectral Bandwidth at 50% Φ REL MAX IF = 20mA Δλ Blue - 25 - nm Capacitance C Blue - 100 - pF Forward Voltage IF = 20mA VF [2] Blue - 3.3 4 V Reverse Current (VR = 5V) IR Blue - - 50 µA Temperature Coefficient of λpeak IF = 20mA, -10°C ≤ T ≤ 100°C TCλpeak Blue - 0.04 - nm/°C Temperature Coefficient of λdom IF = 20mA, -10°C ≤ T ≤ 100°C TCλdom Blue - 0.03 - nm/°C Temperature Coefficient of VF IF = 20mA, -10°C ≤ T ≤ 100°C TCV Blue - -2.9 - mV/°C nm Code. 3B 473 - 475 ABSOLUTE MAXIMUM RATINGS at TA=25°C Parameter Symbol Unit Power Dissipation PD 80 mW Reverse Voltage VR 5 V Junction Temperature Tj 115 °C Operating Temperature Top -40 to +100 °C Storage Temperature Tstg -40 to +110 °C DC Forward Current IF 20 mA Peak Forward Current IFM [1] 150 mA Thermal Resistance (Junction / Ambient) Rth JA [2] 330 °C/W Thermal Resistance (Junction / Solder point) Rth JS [2] 210 °C/W Value Electrostatic Discharge Threshold (HBM) - 250 V Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. R th JA ,Rth JS Results from mounting on PC board FR4 (pad size ≥ 16 mm 2 per pad). 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. A ll data sheet.com

© 2019 Kingbright. All Rights Reserved. Spec No: DSAL4009 / 1201007405 Rev No: V.4B Date: 01/09/2019 Page 3 / 5 0.1 100 Ta = 25 °C Forward voltage (V) Forward current (mA) 0.01 0.1 11 0 1 0 0 Ta = 25 °C Forward current (mA) Luminous intensity normalised at 20 mA - 4 0 - 2 0 0 2 04 06 08 0 1 0 0 Ambient temperature (°C) Permissible forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 - 4 0 - 2 00 2 04 06 08 0 1 0 0 Ambient temperature (°C) Luminous intensity normalised at T a = 25 °C 20% 40% 60% 80% 100% 350 400 450 500 550 600 650 700 750 800 T a = 25 °C Blue Wavelength (nm) Relative Intensity (a. u.) TECHNICAL DATA RELATIVE INTENSITY vs. WAVELENGTH BLUE TAPE SPECIFICATIONS (units : mm) REEL DIMENSION (units : mm) REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS 0.5 0.50.0 -90° -75° -60° -45° -30° -15° 75° 60° 45° 30° 0° 15° 90° 1.0 1.0 Ta = 25 °C SPATIAL DISTRIBUTION AA2214QBS/D-AMT Forward Current vs. Forward Voltage Luminous Intensity vs. Forward Current Forward Current Derating Curve Luminous Intensity vs. Ambient Temperature Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. A ll data sheet.com

© 2019 Kingbright. All Rights Reserved. Spec No: DSAL4009 / 1201007405 Rev No: V.4B Date: 01/09/2019 Page 4 / 5 AA2214QBS/D-AMT Items Symbols Conditions Failure Criteria luminous Intensity lV IF = 20mA Testing Min. Value < Spec. Min. Value x 0.5 Forward Voltage VF IF = 20mA Testing Max. Value ≥ Spec. Max. Value x 1.2 Reverse Current IR VR = Maximum Rated Reverse Voltage Testing Max. Value ≥ Spec. Max. Value x 2.5 High temp. storage test - - Occurrence of notable decoloration, deformation and cracking RELIABILITY TEST ITEMS AND CONDITIONS The reliability of products shall be satisfied with items listed below LOT TOLERANCE PERCENT DEFECTIVE (LTPD) : 10% No. Test Item Standards Test Condition Test Times / Cycles Number of Damaged

1 Continuous operating test - Ta = 25°C, IF = maximum rated current * 1,000 h 0 / 22

2 High Temp. operating test EIAJ ED-4701/100(101) Ta = 100°C, IF = maximum rated current * 1,000 h 0 / 22 3 Low Temp. operating test - Ta = -40°C, IF = maximum rated current * 1,000 h 0 / 22 4 High temp. storage test EIAJ ED-4701/100(201) Ta = maximum rated storage temperature 1,000 h 0 / 22 5 Low temp. storage test EIAJ ED-4701/100(202) Ta = -40°C 1,000 h 0 / 22 6 High temp. & humidity storage test - Ta = 60°C, RH = 90% 500 h 0 / 22 7 High temp. & humidity operating test - Ta = 60°C, RH = 90% IF = maximum rated current * 500 h 0 / 22

8 Soldering reliability test EIAJ ED-4701/100(301)

Moisture soak: 30°C, 70% RH, 72h Preheat: 150~180°C (120s max.) Soldering temp: 260°C(10s) 2 times 0 / 18

9 Thermal shock operating test - Ta = -40°C(15min) ~ 100°C(15min)

IF = derated current at 100°C 1,000 cycles 0 / 22

10 Thermal shock test - Ta = -40°C(15min) ~ maximum rated

storage temperature(15min) 1,000 cycles 0 / 22 11 Electric Static Discharge (ESD) EIAJ ED-4701/100(304) C = 100pF, R2 = 1.5KΩ V = 250V Once each Polarity 0 / 22

12 Vibration test - a = 196m/s², f = 100~2KHz, t = 48min for all xyz axes 4 times 0 / 22

• : Refer to forward current vs. derating curve diagram CRITERIA FOR JUDGING DAMAGE A ll data sheet.com

© 2019 Kingbright. All Rights Reserved. Spec No: DSAL4009 / 1201007405 Rev No: V.4B Date: 01/09/2019 Page 5 / 5 PACKING & LABEL SPECIFICATIONS AA2214QBS/D-AMT PACKING & LABEL SPECIFICATIONS HANDLING PRECAUTIONS Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might lead to damage and premature failure of the LED. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry. 4-1. The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. 4-2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup. 4-3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production. 5. As silicone encapsulation is permeable to gases, some corrosive substances such as H 2S might corrode silver plating of lead frame. Special care should be taken if an LED with silicone encapsulation is to be used near such substances. PRECAUTIONARY NOTES 1. The information included in this document reflects representative usage scenarios and is intended for technical reference on ly. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at https://www.KingbrightUSA.com/ApplicationNotes A ll data sheet.com