A54R CONNOR-WINFIELD | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. P R O D U C T D A T A S H E E T Specifications subject to change without notice. DATA SHEET #: REV: DATE: PAGE OF Copyright 2001 Connor-Winfield all rights reserved. a CRYSTAL CONTROLLED OSCILLATORS The Connor-Winfield A54R, A51R, A52R and A53R are 5.0V Tri-State CMOS/TTL Compatible Crystal Controlled Oscillators (XO). The A54R, A51R, A52R and A53R are designed for applications requiring precision clocks. A54R - 125MHz ACMOS CLOCK SERIES CENTER FREQUENCY
FEATURES
DESCRIPTION
ORDERING INFORMATION
5.0V OPERATION FREQUENCY RANGE: 10.0 to 135MHz TEMPERATURE RANGE: 0 to70°C OVERALL FREQUENCY TOLERANCE: A54R: ±20ppm A51R: ±25ppm A52R: ±50ppm A53R: ±100ppm TRI-STATE ENABLE / DISABLE FUNCTION HERMETICALLY SEALED PACKAGE
8 Pin DIP Tri-State ACMOS Clock Oscillators
A54R, A51R, A52R, A53R Ac011 6/3/04 www.conwin.com CW 0107 A54R 125M Tri-State Enable / Disable Function Output High or Open Enable Low Disable (High Impedance) ABSOLUTE MAXIMUM RATINGS TABLE 1.0 PARAMETER UNITS MINIMUM NOMINAL MAXIMUM UNITS NOTE Storage Temperature -55 125 Supply Voltage (Vcc) -0.5 Vdc MODEL SPECIFICATIONS: TABLE 2.0 MODEL A54R Frequency Range (Fo) 135 MHz Frequency Tolerance: -20 ppm MODEL A51R Frequency Range (Fo) 135 MHz Frequency Tolerance: -25 ppm MODEL A52R Frequency Range (Fo) 135 MHz Frequency Tolerance: -50 ppm MODEL A53R Frequency Range (Fo) 135 MHz Frequency Tolerance: -100 100 ppm OPERATING SPECIFICATIONS TABLE 3.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE Operating Temperature Range Supply Voltage (Vcc) 4.75 5.00 5.25 Vdc Supply Current (Icc) mA Jitter (BW=10Hz to 20MHz) ps rms Jitter (BW=12kHz to 20MHz) ps rms SSB Phase Noise at 10Hz offset -60 dBc/Hz SSB Phase Noise at 100Hz offset -90 dBc/Hz SSB Phase Noise at 1KHz offset -125 dBc/Hz SSB Phase Noise at 10KHz offset -135 dBc/Hz SSB Phase Noise at 100KHz offset -140 dBc/Hz INPUT CHARACTERISTICS TABLE 4.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE Enable Voltage (Vih) 2.0 Vdc Disable Voltage (Vil) 0.8 Vdc Enable / Disable Time 100 nS ACMOS OUTPUT CHARACTERISTICS TABLE 5.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE LOAD pF Voltage (High) (Voh) 4.40 Vdc (Low) (Vol) 0.44 Vdc Current (High) (Ioh) -24 mA (Low) (Ioh) mA Duty Cycle measured at 50% of Vcc Rise / Fall Time measured from 0.5 to 2.5V nS Start Up Time mS Note: 1) Inclusive of calibration, frequency vs. temperature stability, supply voltage change, load change, shock and vibration, 15 years aging. 2) Oscillator output is enabled with no connection on pin1. PACKAGE CHARACTERISTICS TABLE 6.0 Package Hermetically sealed, metal package.
THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. P R O D U C T D A T A S H E E T Specifications subject to change without notice. DATA SHEET #: REV: DATE: PAGE OF Copyright 2001 Connor-Winfield all rights reserved. a CRYSTAL CONTROLLED OSCILLATORS REV: DATE: PAGE OF Pin Connection Enable /Disable Ground Output Vcc Dimensional Tolerance: ±.005 (.127mm) Ac011 6/3/04